Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
11,377
Total Products
25
Categories
All Analog Devices Components
Showing 4,751–4,800 of 11,377
Analog Devices LTC2408CG#TRPBF is an 8-channel, 24-bit delta-sigma ADC with a 7.5 SPS output rate and SPI-compatible serial interface. It achieves 0.0012% maximum linearity error across analog inputs from -0.0125 V to 6.1875 V with no missing codes. Offered in a 28-pin SSOP package for precision measurement instrumentation.
Differential Amplifiers High Common-Mode Voltage Difference Amplifier
Analog Devices AD636KDZ, True RMS-DC Converter, 0 → 1 V, 14-Pin, SBDIP
Data Acquisition ADCs/DACs - Specialized 1 PH Mtr IC w/ Auto Calibration
Monostable Multivibrator One Shot with Falling Edge Trigger, Non-Triggerable
Board Mount Temperature Sensors Multi Sensor High Accuracy Digital Temperature Measurement System w/ EEPROM
Active Filter Single Low Pass 4th Order 20MHz 8-Pin SOIC N Tube
Analog Devices LT6105IDCB#TRMPBF is a high-side current sense amplifier with a -0.3 V to 44 V common-mode input range and 120 dB typical CMRR. The voltage-feedback operational amplifier provides 0.75 µV maximum input offset voltage in a 6-pin SOT-23 (R-PDSO-N6) package. Suitable for precision current monitoring in industrial, automotive, and power management systems.
Clock Generator MHz to 350MHz-IN 3000MHz-OUT 40-Pin LFCSP EP T/R
IC COMP QD LP 1.221VREF 16-DFN
LINEAR TECHNOLOGY - LT3013EDE#PBF - LDO, 0.25A, 4V TO 80V, SMD, DFN-12
Analog Devices LTC2645 quad 12-bit PWM-to-voltage DAC with integrated 10 ppm/°C reference in MSOP-12 package. Converts PWM inputs directly to 4 independent analog voltage outputs with high precision. Available from stock with worldwide shipping.
Current Sense Amplifiers High Voltage, Bidirectional Current Sense Amplifier
The ADG1634 is a triple/quad SPDT analog switch array featuring 4.5 Ω maximum on-resistance, operating from ±5 V, +12 V, +5 V, or +3.3 V supplies. It supports signal switching from -5 V to +5 V and is housed in a compact 16-pin TSSOP package for low-leakage signal routing. Available worldwide with fast shipping.
Operational Amplifiers - Op Amps Single L/Noise JFET Input OA
Delay Lines / Timing Elements Delay with Rising or Falling Edge Trigger
Current Sense Amplifiers High Side current Sense with -03V to 44v Common Mock
LT1813CS8#PBF is a high-speed dual voltage-feedback op-amp from Analog Devices (Linear Technology) with 100 MHz gain-bandwidth product and 750 V/µs slew rate. Key specs: ±5 V to ±15 V supply, 4 µA input bias current, 85 dB CMRR in 8-pin SOIC. Available from stock worldwide with fast shipping.
Voltage References 2.5V Low Cost uP Prec Series Ref.
Switching Voltage Regulators 300mA (Iout), Micropower Step-dwn
Precision Amplifiers High Voltage, Low Noise, Zero Drift Operation Amplifier
Active Filters Quad Universal Filter Building Block
The LTC2500CDKD-32#PBF is a 32-bit oversampling successive-approximation ADC by Analog Devices featuring a configurable digital filter and 0.0002% linearity error in a 24-pin SON package. It accepts analog inputs from minus 2.5 V to plus 5.1 V with 0.66 µs conversion time. Available from stock worldwide with competitive pricing.
Delay Lines / Timing Elements Delay with Rising or Falling Edge Trigger
Analog to Digital Converters - ADC 18-B, 1Msps, 8-Ch SAR ADC w/ 100dB SNR
ANALOG DEVICES - ADV7604BBCZ-5 - VIDEO/GRAPHIC DIGITIZER, HDMI, CSPBGA260
Switching Controllers No Rsense DC/DC Controller Boost, Flyback & SEPIC
RS-485 Interface IC Fail-Sale RS485 Xcrvr with Carrier Det
Analog to Digital Converters - ADC 16-Bit Delta Sigma ADC w/PGA, Temp
Analog Devices LTC6268HS6-10#TRMPBF is a 4 GHz ultralow bias current FET-input operational amplifier with 2×10⁻¹¹ µA bias current and 77 dB typical CMRR in a SOT-23-6 package. It is optimized for transimpedance amplifiers, photodiode receivers, and high-speed precision analog circuits.
Digital to Analog Converters - DAC 12-bit Vout DAC w/ Internal Reference
LTC2850MPMS8#PBF is a 3.3 V half-duplex RS-485/RS-422 line transceiver by Analog Devices. Key specs: 20 Mbps data rate, Schmitt trigger differential inputs, 8-pin SOIC package. Available from stock with worldwide shipping.
Switching Voltage Regulators Low Noise, 1A, 1MHz Push-Pull DC/DC Driver with Duty Cycle Control
Single Transmitter/Receiver RS-422/RS-485 Automotive 8-Pin MSOP Tube
Audio DSPs 300 MHz 32bit SigmaDSP Audio Processor
Power Management Specialized - PMIC Prec. Micropower RMS to DC converter
Analog to Digital Converters - ADC 32-B Over-Smpl ADC w/ Config Dig Filt
LTC1966MPMS8#PBF is an Analog Devices precision micropower RMS-to-DC converter with 0.15% maximum linearity error and delta-sigma computation for accurate true-RMS measurements. It accepts differential inputs up to ±5.5 V and operates from a dual ±5 V supply. Available in MSOP-8 package with worldwide shipping.
Digital Isolator CMOS 4-CH 150Mbps Automotive 16-Pin SOIC W Tube
Op Amp Single High Speed Amplifier ±18V/36V Automotive 8-Pin SOIC N Tube
Modulator / Demodulator Wideband I/Q Demodulator with Integrated VGA
LTC2851CMS8#PBF is a single-channel RS-422/RS-485 line transceiver from Analog Devices in an 8-pin MSOP package. It supports data rates up to 20 Mbps, operates from a 3.3 V to 5 V supply, and features differential Schmitt-trigger inputs for robust noise immunity. Available from stock with worldwide shipping.
The LT1793CS8#PBF is a low-noise JFET-input operational amplifier in SO-8 package. It delivers 77 dB minimum CMRR, 0.02 nA bias current, and voltage-feedback architecture. Available from stock with worldwide shipping.
Single Transmitter/Receiver RS-422/RS-485 Automotive 8-Pin MSOP Tube
Voltage References Ultra Low Noise, 3.3V Precision Voltage Reference
Operational Amplifiers - Op Amps 250uA 3MHz 200V/us OA w/Shdn
Current Sense Amplifiers Gain Selectable High Side Current Sense Amplifier
RF Mixer 0.01MHz to 4GHz Low Power Active Mixer
The LTC2850HMS8 is a 3.3 V half-duplex RS-485/RS-422 transceiver from Analog Devices operating at up to 20 Mbps data rate. It features differential Schmitt trigger inputs, EIA-485-A and EIA-422 compliance, and is housed in an 8-pin MSOP package. Suited for industrial automation, building control networks, and multi-drop serial communication links requiring noise-immune differential signaling.
Digital Isolator CMOS 4-CH 150Mbps 16-Pin SOIC W T/R
Need Analog Devices Components?
Get competitive quotes from authorized China distributors
Request a Quote