Analog Devices

Differential Amplifiers 5.2GHz DIFF AMP

Gate Drivers Protected High Side MOSFET Driver

Modulator / Demodulator 1.5GHz - 2.5GHz Quadrature Demodulator

Quad Analog-to-Digital Converter (ADC)

LDO Voltage Regulators 600mA Ultra-Low-Nois High-PSRR LDO ADJ

Analog Devices LTC6253HMS-7#PBF is a dual high-speed rail-to-rail input/output op-amp with 130 MHz bandwidth and 105 dB typical CMRR in a 10-pin MSOP package. Supports up to 5.25 V supply with 0.6 µA typical input bias current for demanding signal conditioning and ADC driver applications. Available from stock worldwide for precision high-frequency analog circuit designs.

Switching Voltage Regulators 60V Synchronous 4-Switch Buck-Boost Controller with Spread Spectrum

Variable Resolution, 10-Bit to 16-Bit R/D Converter with Reference Oscillator

Analog Devices LT1723IMS8#TRPBF is a dual 200MHz low-noise precision operational amplifier with voltage-feedback architecture and 75dB CMRR. It delivers 1.1mV maximum offset voltage with 0.3µA bias current at 25°C in a compact MSOP-8 package. Available in tape-and-reel with worldwide shipping.

RS-422/RS-485 Interface IC Complete Isolated RS485/RS422 uModule Transceiver + Power

Linear Voltage Regulators Dual 300mA Adj Out QOD Lo Noise Hi PSRR

Triple-Channel, Digital Isolator, Enhanced System-Level ESD Reliability (2/1 channel directionality)

Analog Devices LTC7541ABN#PBF is a 12-bit R-2R digital-to-analog converter in an 18-pin PDIP package. It accepts parallel binary and offset binary input word formats with 0.0122% maximum linearity error. Available from stock with worldwide shipping.

ANALOG DEVICES - ADUCM330WDCPZ - MCU, 32BIT, CORTEX-M3, 16.384MHZ, LFCSP

The LT1723CS8#PBF is a dual high-speed voltage-feedback operational amplifier from Analog Devices in an 8-pin SOIC package, rated for ±6.3 V or 12.6 V single supply. It features 75 dB CMRR, 700 µV maximum input offset voltage, and automotive-grade operation. From $3.20 in stock with worldwide shipping.

Single low power op-amp,OP90GP DIP8

IMUs - Inertial Measurement Units 6 DOF Prec IMU 8g (125 DPS DNR)

DAC 8-CH 12-bit Automotive 16-Pin MSOP

Voltage References Ultra Low Noise, 5V Precision Voltage Reference

Analog to Digital Converters - ADC 16-bit, 250ksps 2-ch. ADC in MSOP

Flyback Switching Regulator IC Positive or Negative, Isolation Capable 1 Output 240mA 16-TFSOP (0.118", 3.00mm Width), 12 Leads

Interface - I/O Expanders QWERTY Keypad Cntlr

Single Transmitter/Receiver RS-232/RS-422/RS-485 Automotive 28-Pin QFN EP T/R

Precision Amplifiers High Perf Compen Prec Op Amp

Analog to Digital Converters - ADC Quad, 16-Bit, 400ksps Differential ±5V Input SoftSpan ADC with Wide Input Common Mode Range

Analog Devices LTC4162IUFD-LADM#PBF is a multi-cell lithium-ion step-down battery charger supporting up to 35V input and 3.2A charge current. It integrates PowerPath management and I2C telemetry for real-time monitoring. Housed in a 28-pin QFN package for compact power management designs.

Digital to Analog Converters - DAC 5V supply only up to 140MHz IC

Switching Voltage Regulators LTC1550L - Low Noise, Switched Capacitor Regulated Voltage Inverters

LTC3623EUDD#PBF is a high-current synchronous step-down DC-DC converter from Analog Devices, delivering up to 5 A output current from a 4 V to 15 V input. It uses current-mode PWM control and supports adjustable output voltage from 0 V to 0.5 V, requiring an additional 1.5 V to 15 V bias supply. Designed for point-of-load power in high-density servers, FPGA core supplies, and telecom line cards.

Audio DSPs 32bit SigmaDSP Audio 24K/80K

Analog Devices LTC4065LEDC is a standalone 250 mA linear Li-Ion battery charger in a 6-pin 2×2 mm DFN package with integrated thermal regulation and no external sense resistor required. It provides complete single-cell lithium-ion charging for compact portable devices, wearables, and USB-powered consumer electronics.

AD22103 - 3.3V Supply, Voltage Output Temperature Sensor with Signal Conditioning

Analog Devices AD705JN is a single-channel, precision voltage-feedback operational amplifier featuring 128 dB typical CMRR, 150 µV maximum offset voltage, and 0.2 nA bias current. Housed in a DIP-8 package, it delivers ultra-low noise and drift for high-accuracy instrumentation and medical measurement applications.

V-Ref Precision 5V 15mA 8-Pin PDIP N

Precision Amplifiers 2x uP Zero-Drift Op Amps

Analog Comparators 60ns Low Power Comparator

High Speed Operational Amplifiers 800MHz, 3.5mA Power Efficient Rail-to-Rail I/O Op Amps

SOIC-8

Interface - Specialized Single I2C Address Translator

SOIC-8

Analog Devices LTC2991IMS#PBF is an octal I2C voltage, current, and temperature monitor with 8 measurement channels in a 16-pin MSOP package. Measures voltages, differential currents, and internal or external temperature simultaneously. Available in stock worldwide.

Switching Voltage Regulators Boost/SEPIC/Inverting DC/DC Converter with 65V Switch, Soft-Start and Synchronization

The LTC2055HVCMS8#PBF from Analog Devices is a zero-drift, rail-to-rail output op-amp with 5 µV max offset voltage, 500 kHz bandwidth, and 130 dB CMRR, operating from 2.7 V in an 8-pin MSOP package. Available from stock worldwide.

LTC6800HMS8#PBF Analog Devices, Instrumentation Amplifier, ±0.1mV Offset 200kHz, R-RI/O, 5 V, 8-Pin MSOP

Precision Dual Output, High Current, Low Noise, Voltage Reference

Op Amp Single Low Noise Amplifier R-R I/O ±18V/36V 8-Pin SOIC N T/R

LT1672CS8#PBF is a precision rail-to-rail input/output operational amplifier by Analog Devices in an 8-pin SOIC package. Key specs: 98 dB minimum CMRR, 1 nA maximum input bias current, 2 µA supply current. Available from stock with worldwide shipping.

Analog Devices LTC6992HS6-1#TRPBF is a TimerBlox voltage-controlled PWM oscillator offering 0% to 100% pulse width control in a compact SOT-23 6-pin package. It supports operating frequencies from 3.18 µHz up to 1 MHz with 0.1 V to 0.9 V control voltage range. Available in RoHS-compliant tape-and-reel format for automated assembly.

Analog Devices LTC2865IDE#TRPBF is a single-channel RS-422/RS-485 transceiver rated for automotive applications in a 12-pin DFN package with exposed pad. It operates from a 3.0 V to 5.5 V supply with ±15 kV ESD protection on bus pins. Designed for high-reliability industrial and automotive serial communication links.

Power Switch ICs - Power Distribution 6V, 1A Pwr SW w\RCB 1ms