LTC2865IDE#PBF Analog Devices Integrated Circuit (Small Outline No-lead) In Stock
Analog Devices LTC2865IDE#PBF is a full-duplex RS-422/RS-485 line transceiver with selectable 20 Mbps or 250 kbps data rates and 60 V fault protection, in a 12-pin DFN package. It integrates a separate 3.3 V or 5 V logic supply input with differential Schmitt-trigger receivers for robust industrial bus communication. Available from stock with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Small Outline No-lead
- Pin Count
- 12
- Lifecycle
- ACTIVE
- Datasheet
- LTC2865IDE#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $2.3200(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Selectable 20 Mbps or 250 kbps data rate for flexible RS-485 bus configuration in a single device
- 60 V bus fault protection on driver and receiver pins guarding against industrial wiring faults and transients
- Separate logic supply input supporting 3.3 V and 5 V systems with full-duplex driver and enable controls
Applications
The LTC2865IDE#PBF is designed for industrial automation networks, motor drive control buses, and building management systems that require robust RS-485 or RS-422 communication over long cable runs in high-noise environments. Its 60 V fault protection makes it suitable for panel-wiring scenarios where mis-wired cables may apply damaging voltages to transceiver pins. Engineers also deploy it in multi-drop fieldbus backplanes and SCADA remote terminal units where the choice between 20 Mbps high-speed and 250 kbps low-power modes extends system flexibility.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1695 |
| YTEOL | 10 |
| Differential Output | YES |
| Driver Number of Bits | 1 |
| High Level Input Current-Max | 0.000005A |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Interface IC Type | LINE TRANSCEIVER |
| Interface Standard | EIA-422; EIA-485 |
| JESD-30 Code | R-PDSO-N12 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Out Swing-Min | 1.5V |
| Output Low Current-Max | 0.003A |
| Output Polarity | COMPLEMENTARY |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOLCC12,.12,20 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Receive Delay-Max | 65ns |
| Receiver Number of Bits | 1 |
| Supply Current-Max | 1.3mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 3V |
| Supply Voltage-Nom | 3.3V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Transmit Delay-Max | 1500ns |
| ## LTC2865IDE#PBF Alternates Showing results | Image |
| Package | Small Outline No-lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for LTC2865IDE#PBF:
suggested
suggested
suggested
suggested
Frequently Asked Questions
What data rates does LTC2865IDE#PBF support, and how does the rate selection affect power consumption?
The LTC2865IDE#PBF offers a selectable data rate of either 20 Mbps for high-speed data transfer or 250 kbps for low-power operation on the same RS-485 bus. Switching to 250 kbps reduces drive current and slew rate, lowering electromagnetic emissions and supply current in battery-backed RTU and SCADA nodes where energy budget is constrained.
How much bus fault voltage can the LTC2865IDE#PBF withstand, and why is this important in industrial wiring?
The LTC2865IDE#PBF tolerates up to ±60 V on its bus pins without permanent damage. In industrial panel installations, mis-wired power conductors or ground faults can apply tens of volts to RS-485 lines. Standard transceivers typically survive only ±15 V to ±25 V, so the 60 V rating of the LTC2865IDE#PBF prevents costly field failures when sharing conduits with power wiring.
Can LTC2865IDE#PBF interface directly with both 3.3 V and 5 V microcontrollers without level shifters?
Yes. The LTC2865IDE#PBF features a dedicated logic supply pin (VL) that independently sets the driver input and receiver output logic levels. Connecting VL to 3.3 V configures the device for 3.3 V logic, while connecting VL to 5 V makes it compatible with 5 V MCUs. This eliminates external level-shift ICs and reduces BOM cost in mixed-voltage industrial controller boards.
In a multi-drop RS-485 network, how many nodes can share a bus with LTC2865IDE#PBF?
The LTC2865IDE#PBF presents a 1/8 unit load to the RS-485 bus, which allows up to 256 devices on a single segment under the standard RS-485 loading rule of 32 unit loads per driver. For a 20 Mbps link, stub length and cable termination with a 120-ohm resistor at each end remain the practical limits rather than receiver count, enabling large multi-drop networks in factory automation backbones.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $5.4800 | $5.48 |
| 10+ | $3.6240 | $36.24 |
| 273+ | $3.4600 | $944.58 |
| 546+ | $3.3600 | $1834.56 |
| 1000+ | $2.3200 | $2320.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”