Analog Devices

A 7-BIT CURRENT DAC FOR POWER CO

Analog Devices LT3085IMS8E#TRPBF is an adjustable positive LDO linear regulator with 0 V to 36 V output range and 500 mA output current in an 8-pin MSOP with exposed pad. It achieves 0.275 V typical dropout and is automotive-grade for use in vehicle and industrial systems. Paralleling capability enables higher current delivery without additional balancing circuitry.

LTC6253IMS8#PBF is a dual high-speed rail-to-rail input/output operational amplifier from Analog Devices, with 800 MHz gain-bandwidth product and only 3.5 mA supply current per amplifier. It features a common-mode rejection ratio of 105 dB typical and 0.7 µA average bias current in a compact MSOP-8 package. Ideal for ADC driver circuits, active filters, and high-frequency signal conditioning in portable and industrial instrumentation.

Differential Amplifiers Gain of 1 Fully Differential In/Out Amplifier

Fully differential input/output operational amplifier with a fixed gain of 10, 60 dB CMRR, and 2.5 mV max offset voltage. Ideal for ADC driver and signal conditioning applications in an 8-pin MSOP package with worldwide availability.

Differential Amplifiers Gain of 1 Fully Differential In/Out Amplifier

IC ADC 16BIT PAR/SRL 25MSP 52QFN

Differential Amplifiers Gain of 2 Fully Differential In/Out Amplifier

LFCSP-16

The LTC1992-5CMS8#PBF is a fully differential input/output amplifier from Analog Devices with a fixed gain of 5. It delivers 60 dB typical CMRR and 2500 µV maximum input offset voltage in a compact MSOP-8 package. Available from stock with worldwide shipping.

DSP 16bit/32bit 200MHz Automotive 88-Pin LFCSP EP Tray

Analog Comparators RR Fast 2.5-5.5V SGL-Supply TTL/CMOS

Differential Amplifiers Fully Differential In/Out Amplifier

Linear Voltage Regulators Dual 300mA Fixed Out QOD Lo Noise Hi PSRR

Analog Devices LT1999IMS8-50F is a high-voltage bidirectional current sense amplifier engineered for pin-level FMEA robustness. It features a 105dB CMRR and operates with input offset voltage up to 1500µV. Packaged in 8-pin SOIC, it suits power monitoring in harsh industrial environments.

Resistor Networks & Arrays Matched Resistor Network, Dual 1k/1k

DUAL, MULTI-BAND 16-BIT, 12GSPS

Switching Voltage Regulators 4-Channel IPS w/Quad Low-Noise Buck Reg

Analog Devices LT5400ACMS8E-1#PBF is a quad matched resistor network with four 10 kΩ resistors in an MSOP-8 package offering ultra-tight 0.01% matching tolerance. Delivers better than 2 ppm/°C tracking temperature coefficient for precision analog circuit designs. Ideal for precision gain-setting, differential amplifier feedback, and bridge measurement applications.

2-Channel Dual ADC Pipelined 65Msps 16-bit Serial 52-Pin QFN EP Tube

Clock Generators & Support Products Long Timer, Low Frequency Oscillator

The LT4295HUFD#PBF is a PoE++ PD (Powered Device) forward/flyback controller IC from Analog Devices, supporting IEEE 802.3bt Type 3/4 power delivery up to 90 W. It accepts 40 V nominal PoE input up to 60 V maximum and integrates current-mode control for high-efficiency isolated DC/DC conversion. Available in a 28-lead QFN package from global authorized distributors.

Interface - Specialized L V I2C/SMBus Accelerator

LT3030EFE#TRPBF is a dual-output adjustable low-dropout linear regulator from Analog Devices, providing 750 mA and 250 mA outputs with a typical dropout voltage of only 0.3 V. It features low noise micropower operation and supports input-to-output differential voltages up to 18.78 V in a 20-pin TSSOP package.

Resistor Networks & Arrays Quad Matched Resistor Network, 10K

LDO Regulator Pos 0V to 36V 0.5A Automotive 6-Pin DFN EP T/R

42V, 4A Synchronous Step-Down Silent Switcher with 2.5μA Quiescent Current

The LTC6400IUD-20#PBF is a 3 GHz low-noise, low-distortion differential amplifier from Analog Devices with 20 dB fixed gain, 65 dB CMRR, and a 2 mV maximum input offset voltage. It is packaged in a 16-pin QFN for RF and ADC driver applications. Available from stock with worldwide shipping.

Analog Front End - AFE Optical AFE for Health Monitoring

Analog Devices LTC6990MPS6#TRPBF is a voltage-controlled silicon oscillator producing a square wave from 0.000488 MHz to 2 MHz with an enable/disable function, rated for automotive use. Output frequency is set by an external resistor with a 4-to-1 divider range, packaged in a compact 6-pin TSOT-23 measuring 2.9 mm x 1.75 mm. Available on tape and reel from stock for automotive and industrial timing designs.

Prescaler program 5-Bit Counter SMT, DC - 2.2 GHz

Switching Voltage Regulators 18V, 5A Synchronous Buck-Boost DC/DC Converter

Resistor Networks & Arrays Matched Resistor Network, Dual 1.25k/5k

Analog Devices LT3080EMS8E#PBF, LDO Regulator, 1.1A Adjustable, 0 → 36 V, 1% 8-Pin, MSOP

ARM Microcontrollers - MCU 512kB ARM Cortex ULP MCU

Battery Management Lithium-Ion Linear Bat Charger

LTC4162EUFD-FFS#PBF is a 35 V / 3.2 A multi-cell LiFePO4 step-down battery charger IC from Analog Devices with integrated PowerPath management and I2C telemetry in a 28-pin QFN package. It suits industrial battery backup, portable equipment, and energy storage applications requiring smart, monitored charging with system load sharing.

Charge Pump STPUP 3.3V 80mA 8-Pin MSOP T/R

Conv DC-DC 3.6V to 20V Step Down Dual-Out 1.5V to 12V 2A/2A uModule 25-Pin BGA Tray

ADE7757 is an energy metering IC from Analog Devices with an integrated oscillator, designed for single-phase power measurement in residential and commercial electricity meters. It outputs calibrated active energy pulses with better than 0.1% accuracy over a 500:1 dynamic range. Available from stock worldwide with competitive pricing.

Charge Pump STPUP 5V 100mA 8-Pin MSOP Tube

Switching Voltage Regulators High Input Voltage, Boost, Flyback, SEPIC, and Inverting Converter

Switching Voltage Regulators 3A Wide Vin, Low Noise Buck-Boost DC/DC Converter

Analog Devices LTC2645IMS-L12#PBF is a quad-channel 12-bit PWM-input to voltage-output DAC with an integrated 10 ppm/°C internal reference in MSOP-16 package. Enables simple microcontroller PWM-to-analog conversion for precision control and calibration applications.

LDO Voltage Regulators 3.3V Low Dropout Regulator

Analog Devices LTC4162EUFD-LAD#PBF is a multi-cell lithium-ion step-down battery charger supporting up to 35 V input and 3.2 A charge current. It integrates PowerPath management and I2C telemetry for real-time monitoring of voltage, current, and temperature. Available in a compact 28-pin QFN package for industrial and portable power management systems.

HMC8038WLP4CETR is a high-isolation silicon SPDT nonreflective RF switch from Analog Devices covering 0.1 GHz to 6.0 GHz, packaged in a 16-pin QFN. It delivers 51 dB typical off-state isolation with low insertion loss and maintains a matched impedance on the off-port to prevent signal reflections. Designed for antenna switching, test instrumentation, and wideband communication systems.

RS-422/RS-485 Interface IC Diff Drvr & Rcv Pair w/ Fail-Safe Rcv O

Analog Devices LTC3119HFE#PBF is a synchronous buck-boost DC/DC converter supporting 2.5 V to 18 V input and 5 A output current. It delivers adjustable output from 0.8 V to 18 V with current-mode PWM control for stable regulation. Available from global distributors with fast shipping.

Forward Converter Regulator Positive, Isolation Capable Output Step-Up/Step-Down DC-DC Controller IC 38-TSSOP-EP