Analog Devices

The LTC4311IDC#TRMPBF is an I2C and SMBus rise-time accelerator from Analog Devices that actively drives SDA and SCL lines high to speed up edge transitions on heavily loaded buses. It operates from 2.7 V to 5.5 V and requires no I2C address or configuration, housed in a 6-pin DFN package. Suitable for multi-master I2C buses with large capacitive loads.

Switching Voltage Regulators 25V, 600mA Buck-Boost DC/DC Converter with 1.6 A Quiescent Current

The LTC6945IUFD#PBF is an ultralow-noise integer-N PLL frequency synthesizer from Analog Devices, covering 0.35 GHz to 6 GHz with exceptional phase noise and spurious performance. Housed in a 28-pin QFN package, it serves as a precision clock source for high-frequency instrumentation and communication systems.

Analog Devices LT8614EUDC#TRPBF is a 42V, 4A synchronous step-down Silent Switcher regulator with ultra-low 2.5 µA quiescent current and current-mode PWM control. Operates from 3.4V to 42V input with 6V nominal, delivering high efficiency across wide input ranges in an 18-pin DFN package. Ideal for automotive, industrial, and IoT battery-powered applications requiring low EMI and minimal standby power.

RS-422/RS-485 Interface IC Diff Drvr & Rcv Pair w/ Fail-Safe Rcv O

LDO Voltage Regulators IC 300mA LDO CMOS

RF Transceiver 1.3V/1.8V/1.89V 196-Pin CSP-BGA T/R

Analog Devices LTC4162IUFD-L42#PBF is a 35 V, 3.2 A multi-cell lithium-ion step-down battery charger with integrated PowerPath management and I2C telemetry, in a 28-pin QFN package, designed for industrial and portable equipment requiring smart battery charging with real-time monitoring.

Switching Voltage Regulators Low Noise, 1A, 1MHz Push-Pull DC/DC Driver with Duty Cycle Control

Interface - Specialized I2C/SMBus Rise Time Accelerator

Switching Voltage Regulators [Tin-Lead SnPb BGA] 36VIN, 5A uModule Regulator with 5-Output Configurable LDO Array

Interface - Specialized L V I2C/SMBus Accelerator

Analog Switch Quad SPDT Automotive 20-Pin LFCSP EP T/R

Multiplexer Switch ICs Pin-selectable 4-Channel I2C Mux with Bus Buffer

Analog to Digital Converters - ADC Buffered Dual, 18-Bit, 550ksps Differential 10.24V Input SoftSpan ADC with Wide Input Common Mode Range

Analog Devices LTC4162EUFD-FFSM#PBF is a multi-cell LiFePO4 step-down battery charger rated to 35 V input and 3.2 A charge current with PowerPath management. It integrates I2C telemetry for real-time monitoring of voltage, current, and temperature. Available from stock worldwide with competitive pricing.

Analog Devices LTC6655CHMS8-3#PBF is an ultra-low noise, 3.0 V precision three-terminal voltage reference in an 8-pin MSOP package. It delivers output accuracy within ±1.5 mV (2.9985 V to 3.0015 V) with extremely low noise for high-resolution ADC and DAC applications. Widely stocked worldwide for demanding measurement and instrumentation designs.

Current Sense Amplifiers High Voltage, Bidirectional Current Sense Amplifier

The LTC2757AILX#PBF is an 18-bit parallel current-output DAC with Softspan from Analog Devices, achieving 1 LSB INL accuracy. It supports bipolar output voltage ranging from -10V to +10V and accepts parallel binary word input. Available in a 48-lead LQFP package with RoHS-compliant PBF finish and worldwide shipping.

Current Sense Amplifiers HV Bidirectional Current Sense Amp Engineered for Pin FMEA

Attenuators 1dB LSB 5-Bit dig atten SMT, DC - 3 GHz

LINEAR TECHNOLOGY - LTC2376IMS-20#PBF - Analogue to Digital Converter, 20 bit, 250 kSPS, Differential, Single Ended, SPI, Single, 2.375 V

Analog Devices LTC2353CLX-16#PBF is a buffered dual-channel, 16-bit successive approximation ADC sampling at up to 550 ksps with a wide analog input range of -10.23 V to +10.25 V. It achieves 0.0023% maximum linearity error and 1.1 µs maximum conversion time, housed in a 48-pin LQFP package. Ideal for precision industrial data acquisition and multi-channel measurement systems requiring high-speed, high-accuracy sampling.

80V VIN and VOUT Synchronous 4-Switch Buck-Boost DC/DC Controller

LDO Voltage Regulators 1.1A Adjustable, Single resistor LDO

Switching Voltage Regulators 50mA/500mA ULP Buck VINOK w/o OD ST

LTC3130EMSE-1#PBF is an Analog Devices adjustable buck-boost DC/DC switching regulator with 2.4 V to 25 V input range and 1.8 V to 12 V output at up to 600 mA. It uses current-mode PWM control in a 16-pin MSOP package, with fixed output options at 3.3 V, 5 V, and 12 V. Available from authorized distributors with worldwide shipping.

Switching Voltage Regulators 80V Vin and Vout Synchronous 4-Switch Buck- Boost DC/DC Controller

Standard Clock Oscillators 1kHz to 33MHz resistor set SOT-23 oscillator

Analog Devices LTC4234CWHH#PBF is a quad hot-swap switching controller operating from a 2.9 V to 15 V input range with a 12 V nominal supply. It controls four independent load switches with programmable current limiting and fault detection for hot-plug protection. Packaged in a 38-pin XMA format for compact multi-rail server and telecom board protection.

RS-485 Interface IC 100Mbit/s Quad RS485 Drivers

Analog Devices LT1243CS8 is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 8 pins, 5 V in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Wideband 4 GHz, 43 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT

Switching Voltage Regulators 36Vin, 600mA Step-Down uModule Converter with 5uA Quiescent Current

Digital Isolators I2C uModule Isolator Adjustable +/-5V Regulated Power

Switching Voltage Regulators [Tin-Lead SnPb BGA] 36Vin, 600mA Step-Down uModule Converter with 5uA Quiescent Current

The LTM8005EY#PBF is a 38 V input, 38 V output boost module LED driver from Analog Devices in an 80-ball BGA package. It supports 2-segment LED drive with integrated magnetics for compact designs. Suited for general lighting, architectural lighting, and display backlighting requiring high-voltage LED strings.

LINEAR TECHNOLOGY - LTC3115EDHD-2#PBF - DC-DC Switching Synchronous Buck-Boost Regulator, Adjustable, 2.7V-40Vin, 2.7V-40Vout, 2Aout, DFN-16

SP Amp DIFF AMP Single R-R I/O ±2.625V/5.25V Automotive 8-Pin MSOP T/R

The LTC3129EMSE-1#PBF is a 15 V, 200 mA synchronous buck-boost DC-DC converter from Analog Devices with an ultralow 1 µA quiescent current and 1.92 V to 15 V input range. It maintains regulated output across buck, boost, and pass-through modes for seamless operation during battery discharge. Available in a compact MSOP-10E package suited for portable, battery-powered IoT and wearable applications.

LINEAR TECHNOLOGY - LTC2376IDE-20#PBF - IC, ADC, 20BIT, 250KSPS, DFN-16

Current & Power Monitors & Regulators 200mA Two Terminal Programmable Current Source

Analog Devices LTC2376CMS-18#PBF is an 18-bit SAR ADC with 250 ksps throughput rate in a 16-pin MSOP package. It features a serial interface, 3 µs conversion time, and accepts inputs from -2.5 V to 5.1 V. Available in tube packaging with worldwide shipping.

Switching Voltage Regulators 80V Vin and Vout Synchronous 4-Switch Buck- Boost DC/DC Controller

Forward Converter Regulator Positive, Isolation Capable Output Step-Up/Step-Down DC-DC Controller IC 38-TSSOP-EP

Conv DC-DC 1.8V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 1.8V to 5.5V 3A 16-Pin DFN EP Tube

Low IQ Boost/SEPIC/Inverting Converter with 2A, 100V Switch MSOP –40°C to 125°C

Surge Suppressors 100V OV, UV, OC and Reverse Supply Protection Controller with -3mV Reverse Threshold

The LTC6930HMS8-8.00#TRPBF is a silicon CMOS oscillator from Analog Devices with a nominal 8 MHz output and selectable divide-by outputs down to 32.768 kHz, featuring a 3 ns maximum fall time. It suits microcontroller clocking, UART baud-rate generation, and low-power timer applications in an MSOP-8 package.

The LTC6930HMS8-5.00#TRPBF is a precision micropower CMOS oscillator from Analog Devices with a fixed 5 MHz output frequency, 3 ns maximum fall time, and surface-mount 8-pin MSOP package, ideal for low-power clocking in portable instruments, ADC drivers, and microcontroller clock sources.