Analog Devices

Surge Suppressors 100V OV, UV and Reverse Supply Protection Controller with 0.5ms On Delay

LDO Voltage Regulators 3.3/5Vin 2A Ultra Low Noise LDO Fixed

LTC6603CUF#PBF is a dual-channel, 2.5 MHz cutoff low-pass filter IC from Analog Devices in a 24-pin QFN package with 1.6 kΩ input impedance and only 0.75 mm profile height. It targets RF signal conditioning, data acquisition front-ends, and anti-aliasing filter applications requiring precise, matched filter responses.

Digital Potentiometer ICs 128tap, Quad DigiPOT, NVM, SPI

Operational Amplifiers - Op Amps Dual Low Voltage Micropower CMOS OpAmp

I2C Interface 3.6V 24-Pin LFCSP EP T/R

IC XOR/XNOR GATE 16SMT

Hot Swap Voltage Controllers Dual CompactPCI Hot Swap Controller

The LTC2850CMS8#PBF is a high-speed RS-422/RS-485 line transceiver from Analog Devices, supporting data rates up to 40 Mbps with a differential Schmitt trigger input. Packaged in a compact 8-pin MSOP, it operates from a single 3.3 V or 5 V supply with a maximum supply voltage of 7 V.

Analog Devices LTC2341IUH-16#PBF is a dual 16-bit SAR ADC with 666 ksps per channel throughput and differential SoftSpan input configuration. It supports a wide input common-mode range with a 2.5 V analog input maximum and 0.0488% max linearity error in a compact 10-pin QFN package. Available worldwide for high-speed precision data acquisition systems.

5Bit 1dBStep 31dB 3GHz 16-Pin LFCSP EP T/R

Op Amp Dual Low Noise Amplifier R-R I/O ±15V/30V 8-Pin LFCSP EP T/R

Analog to Digital Converters - ADC 24-Bit 250ksps 20uS Settling

Active Filters 1.4nV/Rt.Hz 180MHz Filt Building Block

Analog Devices LTC4162IUFD-SAD#PBF is a multi-cell lithium-ion step-down battery charger with 35 V input, 3.2 A charge current, PowerPath management, and I2C telemetry. Housed in a compact 28-pin QFN package for portable and industrial power designs. Available with worldwide shipping.

Attenuators 0.5dB LSB,Digital Atten 100MHz-30GHz

Differential Amplifiers High BW, Dual Diff Amp

The LTC6242HVCDHC#PBF is a quad precision 18 MHz low-noise CMOS operational amplifier from Analog Devices featuring a maximum input offset voltage of 650 µV, a typical CMRR of 105 dB, and rail-to-rail output. It is ideal for precision signal conditioning and sensor amplification in industrial and instrumentation applications.

Infrared Receivers 4Mbps Infrared Receiver

Accelerometer Single ±500g 5V 4mV/g 32-Pin LFCSP EP T/R

Operational Amplifiers - Op Amps Single 2 A Zero-Drift Operational Amplifier

Active Filters 1.4nV/Rt.Hz 180MHz Filt Building Block

Reliable low cost voltage monitor with reset output Suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V power supply voltages Reset threshold levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V, 2.55 V, 2.31 V, and 2.18 V typical Active high and low push-pull output choices: ADM1810, ADM1812, ADM1815, and ADM1817 Open-drain with internal pull-up resistor output choices: ADM1811, ADM1813, ADM1816, and ADM1818 Can be used with a manual push-button to generate a reset: ADM1813, ADM1818 Initialization of microproc

Precision Amplifiers Quad Precision 18MHz Low noise CMOS Op Amp

Digital to Analog Converters - DAC Dual 12-bit Parallel IOUT IC

Current Sense Amplifiers Current Sense Amplifier

Switching Voltage Regulators uPMU V+/V- sw reg for bipolarADC/DAC/AMP

Analog Devices ADUCM360 is a precision analog microcontroller integrating dual 24-bit sigma-delta ADCs with an ARM Cortex-M3 processor in a QFN package. Designed for low-power precision measurement with on-chip PGA, excitation current sources, and 128 KB flash. Available from global distributors with worldwide shipping.

Analog Switch Dual SPDT 16-Pin TSSOP T/R

Analog to Digital Converters - ADC 12-bit, 2-ch 14ksps I2C SAR ADC

Digital Potentiometer ICs 1024 tap, 1% digiPOT with SPI interface

Phase Locked Loops - PLL PLL + VCO 1610-2080MHz /2 x2

Precision Amplifiers Dual uP 1MHz R-to-R Op Amp

LDO Voltage Regulators CMOS LDO 6.5V 1A

LDO Voltage Regulators 1A Hi PSRR FT L DO 1.8Vo

LDO Voltage Regulators 1A Hi PSRR FT L DO 2.5Vo

LTC1560-1IS8 is a continuous-time, low-noise elliptic lowpass filter IC from Analog Devices with selectable 1 MHz or 500 kHz cutoff frequency in an SO-8 package. Key specs include ±5 V supply operation, pin-selectable cutoff, and deep stopband attenuation for anti-aliasing in high-speed data acquisition systems. Available from stock with worldwide shipping.

VCO Oscillators VCO SMT with Fo/2, 9.05 - 10.15 GHz

Precision Amplifiers Dual uP 1MHz R-to-R Op Amp

SMT, 6 PIN

Infrared Receivers 4Mbps Infrared Receiver

IRDA TX/RX 4Mbps 5V 8-Pin SOIC N Tube

Analog Devices LTC2328CMS-18#PBF is an 18-bit, 1 Msps successive approximation ADC with true bipolar ±10 V input range and SPI serial interface in MSOP-16 package. Achieves 0.0019% linearity error and 0.527 µs conversion time. Available from stock with worldwide shipping.

Precision Amplifiers Dual uP 1MHz R-to-R Op Amp

Precision Amplifiers Dual Low Noise OA (Av = 1)

Supervisory Circuits RESET GENERATOR I.C.

Analog Devices ADP7142 is a 40V input, 200mA LDO linear regulator with 3.3V fixed output, 420mV maximum dropout, in 6-pin SOT-23 package, covering -40°C to +125°C for industrial and high-voltage analog supply applications.

LTC1992IMS8#PBF Analog Devices, 2-Channel Differential Amplifier 4MHz Rail to Rail Input/Output 8-Pin MSOP

1.5A, Low Noise, Fast Transient Response LDO Regulators

Analog Devices LTC2877HMSE#PBF is a 60 V fault-protected RS-485/RS-422 transceiver supporting PROFIBUS and operating from 3 V or 5 V logic supplies. It features differential Schmitt trigger inputs and a single driver/receiver channel in a small outline package. The device delivers robust industrial communication with ±60 V bus fault protection for harsh environments.