Analog Devices

LDO Voltage Regulators Micropower, Low Noise VLDO Regulator

The LTC4368CMS-2#TRPBF is a 100 V input fault protection controller with overvoltage, undervoltage, overcurrent, and reverse supply protection featuring an adjustable -3 mV reverse threshold. It operates as a single-channel input fault controller in an MSOP-10 package, safeguarding downstream circuitry from a wide range of supply fault conditions. Available from stock with worldwide shipping.

Analog Devices LTC3894IFE#PBF is a 150V, low-IQ current-mode step-down DC/DC controller with burst-mode operation in a small outline package. It accepts input voltages from 4.5V to 150V, making it suitable for high-voltage industrial and automotive power stages. Available in stock with worldwide shipping.

Switching Voltage Regulators 1.2MHz/600kHz 800mA High VTG

4.15GHz, 8.3GHz Center Frequency 2V ~ 13V Voltage Controlled Oscillator 7.5±2.5, 12.5±2.5 dBm 10 2nd Harmonic, Typ (dBc)

Digital Signal Processors & Controllers - DSP, DSC ARM, 2x SHARC, LQFP Package, 300 MHz

Analog Devices LTM8074 40V input Silent Switcher µModule regulator delivering 1.2A with output voltage adjustable from 0.8V to 12V in a compact BGA module package. Integrates inductor, capacitors, and controller for ultra-low EMI switching regulation. Available lead-free with worldwide distribution for space-constrained and EMI-sensitive designs.

Analog Devices LTC4362IDCB-2#TRMPBF is a single-channel overvoltage and overcurrent protection IC with automatic retry, housed in an 8-pin DFN (DCB) package. It monitors supply voltage and load current, disconnecting the load within microseconds when fault conditions are detected, then automatically retrying after a timeout. Available from authorized distributors with worldwide shipping.

Analog Devices LTC2364CMS-16#PBF is a 16-bit successive approximation ADC with 250 ksps sample rate and 94.7 dB signal-to-noise ratio. It features a pseudo-differential unipolar input and 3 µs maximum conversion time for high-speed precision measurements. Housed in a 16-lead MSOP package.

Analog to Digital Converters - ADC 4 chn 12bit SAR ADC, ref (typical), I2C

Analog Devices LT8630IFE#PBF is a current-mode PWM switching regulator supporting 3V to 100V input with adjustable output from 0.8V to 60V. Offers high-voltage conversion efficiency in a TSSOP-20 package for industrial and automotive power supply designs.

LTC2364IMS-18#PBF is an 18-bit, 250 ksps successive approximation ADC with 97 dB SNR and 0.001% linearity error in a 16-lead MSOP package, offering pseudo-differential unipolar inputs up to 5.1 V for precision data acquisition.

Linear Technology LTC1661CMS8#PBF, 2-Channel Serial DAC, 10MHz, 8-Pin MSOP

LTM4675EY#PBF is a dual 9A or single 18A μModule DC-DC regulator with PMBus digital power management, operating from 4.5 V to 17 V input. Features current-mode PWM control for precise regulation. Available from stock worldwide with competitive pricing.

The LTC4292IUJ#PBF is a quad-port IEEE 802.3bt Power-over-Ethernet PSE controller with digital control and Ethernet interface, managing up to 4 PoE ports with Type 3/4 support in a 40-pin QFN package. It delivers up to 90W per port with precise power monitoring and classification. From $18.50 in stock worldwide shipping.

RF Switch ICs 0.1-6GHz High Isolation SP5T

LFCSP-24

Clock Synthesizer / Jitter Cleaner bbu derivative for ad9545

Analog Devices LT6003HS5#TRMPBF is an automotive-grade single low-power rail-to-rail input/output op-amp operating on ±8V or 16V single supply with 6 nA bias current, 1600 µV max offset, and 96 dB CMRR in a 5-pin TSOT-23 package.

The LT1352CN8#PBF is a dual voltage-feedback op-amp from Analog Devices in an 8-pin DIP package with 3 MHz gain-bandwidth product and 200 V/µs slew rate. It draws only 250 µA per amplifier with 86 dB CMRR, balancing speed and power efficiency. Available from stock with worldwide shipping.

Analog Devices ADP2370ACPZ-5.0-R7 is an 800 mA synchronous buck switching regulator with a fixed 5.0 V output and 3.2 V to 15 V input range using current-mode PWM control. Packaged in an 8-lead CP no-lead package for compact DC-DC conversion applications.

The LTM4605EV#PBF is a high-efficiency buck-boost DC/DC µModule power regulator accepting 4.5V to 20V input and providing adjustable output from 0.8V to 16V. It uses current-mode pulse-width modulation for stable regulation across wide input and output ranges. Available worldwide with global shipping.

Attenuators SOI 4Bit DAT - v3 ESD Improved MiM

Audio Amplifiers 0.4mmPitchFilterless

Analog Devices LTC6079CGN#PBF is a quad micropower precision rail-to-rail CMOS op-amp with 1 pA typical bias current, 102 dB typical CMRR, and rail-to-rail input/output swing in a 16-pin SSOP package. Available in stock worldwide.

High Speed Operational Amplifiers Dual Matched 1.8GHz Differential Amplifiers/ADC Drivers

LT1809CS6#TRMPBF is a high-speed, rail-to-rail input/output operational amplifier from Analog Devices with low distortion, 86 dB typical CMRR, and 8 µA maximum bias current at 25°C. It is housed in a 6-pin SOT-23 package for space-constrained signal conditioning designs. Available in tape-and-reel with worldwide shipping.

LTC2320CUKG-14#PBF is an octal 14-bit simultaneous-sampling SAR ADC achieving 1.5 Msps per channel in a 52-pin QFN package. It features 0.45 µs maximum conversion time, 0.0183% maximum linearity error, and a ±2 V input range. In stock globally with competitive pricing and worldwide shipping.

The LT1764AET#PBF is a 3A low-dropout linear voltage regulator from Analog Devices featuring fast transient response and adjustable output. With a 0.34 V typical dropout voltage and 0.046 %/V line regulation, it delivers stable power. Available in a TO-5 package with worldwide stocking.

ADP150AUJZ-3.3 is an ultra-low noise 150 mA LDO linear regulator from Analog Devices with a fixed 3.3 V output, delivering only 9 µV RMS output noise for sensitive analog and RF circuits. It operates from 2.3 V to 5.5 V input in a compact 5-pin SOT-23 package with 0.125% load regulation. Available worldwide in lead-free packaging for portable and IoT applications.

IC ADC 12BIT SAR 20LFCSP

Analog Devices LTC6246HS6#TRMPBF is a 180 MHz rail-to-rail input/output op-amp consuming only 1 mA supply current with 76 dB min CMRR, packaged in a compact 6-pin SOT-23. From $3.50 in stock, worldwide shipping.

The LTC2637IMS-LZ12#PBF is a 12-bit, 8-channel I2C DAC from Analog Devices featuring an internal 2.5 V reference and power-on reset to zero-scale, with a maximum linearity error of 0.061%. It provides 8 independent analog outputs up to 2.5 V via a serial I2C interface in a 16-pin MSOP package. Available in stock worldwide with RoHS compliance.

Analog Devices LT1997HMS-2#PBF is a precision difference amplifier with 118 dB typical CMRR, 5 µA maximum bias current, and wide voltage range operation in a compact MSOP-8 package. Designed for high-accuracy differential signal measurements in instrumentation and industrial applications. Available from stock with worldwide shipping.

LTC1658CMS8#TRPBF is a 14-bit micropower serial DAC from Analog Devices with SPI-compatible 3-wire interface, rail-to-rail output to 5.5 V, and single 2.7 V to 5.5 V supply in an 8-pin MSOP package. Delivers 0.0488% linearity for precision analog control. Available worldwide with fast shipping.

Analog Devices LT3990HMSE-5#PBF is a 62 V input, 350 mA step-down switching regulator with an ultralow 2.5 µA quiescent current and integrated catch diodes. Fixed 5 V output uses current-mode PWM control for fast transient response in a 16-pin MSOP package. Available from stock worldwide.

LTC6262IMS8#TRPBF is a dual 30MHz rail-to-rail input/output operational amplifier from Analog Devices, drawing only 240µA supply current per amplifier. It achieves 90dB typical CMRR and operates from a single or dual supply, packaged in an 8-pin MSOP for compact, power-sensitive signal conditioning.

LDO Voltage Regulators 3.3V Fast Transient 1.5A LDO

The LTC3265EFE#PBF is a low-noise dual supply switched capacitor regulator with boost and inverting charge pumps, accepting 4.5 V to 16 V input and providing output voltages up to 20 V in a 20-lead SSOP package. Ideal for generating split rails in precision analog circuits. Available from stock with worldwide shipping.

Analog Devices LTC4316IDD#PBF is a single-channel I2C address translator IC in a 10-pin DFN package that allows multiple identical I2C devices to share one bus by remapping their 7-bit addresses, simplifying system design in embedded applications.

Analog Devices LT3759IMSE#TRPBF is an automotive-grade current-mode PWM boost controller in a 12-pin MSOP-EP package. It supports 1.6 V to 42 V input voltage range and operates at up to 1000 kHz switching frequency. Available in stock with worldwide shipping.

LDO Voltage Regulators 1.5V Fast Transient 1.5A LDO

Analog Devices LT3922-1 synchronous step-up LED driver supporting 36V output and up to 2A LED current in a 28-pin QFN package. Drives 2-string LED arrays with high efficiency synchronous switching. Available in lead-free version with worldwide in-stock distribution.

Switching Voltage Regulators 40Vin, 1.2A Step Down uModule Regulator

Analog Devices LTC3025EDC#TRPBF is a 300 mA adjustable VLDO linear regulator with only 45 mV typical dropout voltage, featuring 0.005%/V line regulation and 0.05% load regulation in a 2×2 mm 6-pin DFN package. It delivers ultra-low dropout performance for powering noise-sensitive RF and analog circuits from tight input voltage rails. Available from global distributors with worldwide shipping.

The LTC1696IS6#TRMPBF is an Analog Devices single-channel voltage monitor and input fault protection controller in a miniature 6-pin TSOT-23 package, providing overvoltage and undervoltage fault detection with a fixed threshold for supply rail protection. Available in stock with worldwide shipping for compact power management designs.

Analog Devices LT6108AIMS8-2#PBF is a precision high-side current sense amplifier with integrated voltage reference and comparators, featuring 125 dB CMRR and 250 µV maximum input offset voltage in an 8-pin MSOP package. Supports current sensing on rails from 2.9 V to 80 V for power monitoring and protection applications. Available from global distributors with a 10-year estimated product life and competitive pricing.

LT5400ACMS8E-2#TRPBF is a 8 pins resistor by Analog Devices. Key specs: 8 pins, Small Outline Packages package, Resistor Networks & Arrays Matched Resistor Network, Quad 100k. From quote-based sourcing, in stock checks support worldwide shipping.

The LT1761ES5-SD#TRMPBF is a low-noise micropower adjustable LDO regulator delivering 100mA with only 0.3V typical dropout. Input-output differential spans 1.08V to 18.78V for versatile supply configurations. Available in SOT-23-5 package with worldwide stock and shipping.

42V/1.5A PEAK SYNCHRONOUS STEP-D