LT1352CN8#PBF Analog Devices Integrated Circuit (Dual-In-Line Packages) In Stock
The LT1352CN8#PBF is a dual voltage-feedback op-amp from Analog Devices in an 8-pin DIP package with 3 MHz gain-bandwidth product and 200 V/µs slew rate. It draws only 250 µA per amplifier with 86 dB CMRR, balancing speed and power efficiency. Available from stock with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Dual-In-Line Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- LT1352CN8#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $5.3800(MOQ 19)
- Temp Range
- ?°C to 70.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of LT1352CN8#PBF?
- Dual op-amp with 3 MHz gain-bandwidth product and 200 V/µs slew rate for fast signal processing
- Ultra-low 250 µA quiescent current per amplifier enabling efficient battery-powered operation
- 86 dB common-mode rejection ratio ensuring accurate differential signal amplification
- 8-pin DIP package for easy prototyping and breadboard-compatible through-hole assembly
What is LT1352CN8#PBF used for?
The LT1352CN8#PBF is well suited for low-power active filter designs, signal conditioning front-ends, and portable instrumentation where high slew rate and wide bandwidth must coexist with minimal supply current. Its dual channel architecture enables differential amplification and balanced signal processing in audio and sensor interfaces. Engineers also deploy it in DAC output buffers and ADC driver circuits where the 200 V/µs slew rate prevents settling time bottlenecks.
What are the specifications of LT1352CN8#PBF?
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1510 (N8) |
| YTEOL | 10 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.075 µA |
| Bias Current-Max (IIB) @25C | 0.05 µA |
| Common-mode Reject Ratio-Min | 78dB |
| Common-mode Reject Ratio-Nom | 86dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 800 µV |
| JESD-30 Code | R-PDIP-T8 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | YES |
| Micropower | NO |
| Neg Supply Voltage Limit-Max | -18 V |
| Neg Supply Voltage-Nom (Vsup) | -5 V |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Min | 30V/us |
| Slew Rate-Nom | 50V/us |
| Supply Current-Max | 0.3mA |
| Supply Voltage Limit-Max | 18V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | NO |
| Technology | BIPOLAR |
| Temperature Grade | COMMERCIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Unity Gain BW-Nom | 2700 |
| Voltage Gain-Min | 10000 |
| Wideband | NO |
| Package | Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia |
Where can I find the LT1352CN8#PBF datasheet?
LT1352CN8#PBF Datasheet DownloadOfficial datasheet from Analog Devices
What are equivalent replacements for LT1352CN8#PBF?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What slew rate does the LT1352CN8#PBF provide and why is it significant for waveform fidelity?
The LT1352CN8#PBF delivers a 200 V/µs slew rate, allowing it to faithfully reproduce fast-rising signals such as square waves or step inputs without slope-limiting distortion, making it suitable for video and pulse amplification tasks.
How does the LT1352CN8#PBF's power consumption compare to standard general-purpose op-amps?
At only 250 µA supply current per amplifier, the LT1352CN8#PBF consumes significantly less power than many standard op-amps like the LM741 which draws over 1.7 mA, making it preferred for battery-powered and always-on sensor nodes.
What CMRR specification does the LT1352CN8#PBF achieve for differential measurement circuits?
The device specifies 86 dB nominal CMRR with a minimum of 78 dB, effectively rejecting common-mode noise on both input lines—critical for accurate differential sensor readings in noisy industrial environments with ground potential differences.
Can the LT1352CN8#PBF operate from a single supply rail in space-constrained designs?
The LT1352CN8#PBF supports supply voltages from ±1.5 V to ±15 V and can be configured with a single supply by biasing the inputs at mid-rail, suitable for 5 V or 3.3 V single-supply portable instrument designs.
In which active filter topologies is the 3 MHz bandwidth of the LT1352CN8#PBF most effective?
The 3 MHz gain-bandwidth product allows the LT1352CN8#PBF to implement Sallen-Key or multiple-feedback low-pass filters with cutoff frequencies up to approximately 300 kHz while maintaining adequate loop gain for accurate response shaping.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
LT3062EDCB#TRPBF
Small Outline No-lead
Integrated Circuit
LT3062EDCB#TRMPBF
Small Outline No-lead
Integrated Circuit
LT8641IUDC#TRPBF
Other
Integrated Circuit
HMC412AMS8GTR
Small Outline Packages
Integrated Circuit
LT3062HMS8E#PBF
Small Outline Packages
Integrated Circuit
LT3062IMS8E#PBF
Small Outline Packages
Integrated Circuit
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 19+ | $7.1300 | $135.47 |
| 100+ | $6.1571 | $615.71 |
| 250+ | $5.8500 | $1462.50 |
| 1000+ | $5.3800 | $5380.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit