Analog Devices

Digital to Analog Converters - DAC 12-bit SPI nanoDAC+ with on-chip 1.25V/2

The LTC6912CGN-1#PBF is a dual-channel digitally controlled programmable gain amplifier (PGA) from Analog Devices, offering eight gain settings from -1 to +32 V/V via a simple 3-wire SPI interface in a 16-pin SSOP package. It operates from ±5V dual supplies with a gain-bandwidth product exceeding 100MHz and very low noise, making it ideal for precision signal conditioning chains. Available from authorized Analog Devices distributors with worldwide stock and shipping.

Analog Devices LT6108IMS8-2#PBF is a precision single-channel current sense amplifier with open-drain output, 125 dB CMRR, and 450 µV maximum input offset voltage in an 8-pin MSOP package. It uses a current-feedback architecture with 0.3 µA bias current for accurate high-side or low-side current measurement. Ideal for power management and battery monitoring systems requiring precision current sensing.

LDO Voltage Regulators 3.3/5Vin 2A Ultra Low Noise LDO Fixed

Buck Switching Regulator IC Positive Adjustable 0.97V 1 Output 8A 32-TFQFN Exposed Pad , 200kHz ~ 2.2MHz , -40°C ~ 125°C (TJ)

LTC6102CMS8#TRPBF is a precision single-channel current sense amplifier from Analog Devices rated to 60 V with a 50 µV maximum input offset voltage and 0.02 µA maximum bias current in an 8-pin MSOP package. It is automotive-qualified and suitable for high-side current monitoring over a wide voltage range. Available from stock worldwide with same-day shipping options.

Linear Voltage Regulators 2A LDO Fix V-out Family

Analog Devices LTC1992-2IMS8#TRPBF is a fully differential input/output amplifier with fixed gain of 2, 60 dB CMRR, 2.5 mV max offset voltage, and rail-to-rail output. Available from stock with worldwide shipping.

Analog Devices LT4294HMS#PBF is a Power over Ethernet Plus Plus (PoE++) powered device (PD) interface controller compliant with the IEEE 802.3bt standard, housed in a 10-pin MSOP package. It manages classification, signature, and hot-swap inrush current control for PD equipment drawing up to 90 W from PoE++ infrastructure. Available from authorized distributors with worldwide shipping.

Analog Devices LTC3630AEDHC#PBF is an automotive-grade synchronous step-down DC-DC converter accepting 4 V to 76 V input and delivering 0.5 A output adjustable from 0.8 V to 76 V in a 16-pin DFN package with exposed pad. It features voltage-mode PWM control and meets AEC-Q100 automotive qualification. Available from authorized distributors worldwide.

Analog Devices LTC6253CMS8#PBF is a dual 800 MHz rail-to-rail input/output op-amp drawing only 3.5 mA supply current. Delivers 105 dB CMRR and 77 dB minimum, packaged in an MS8 SOIC for compact signal-chain designs. Available from stock worldwide with fast shipping.

Switching Voltage Regulators 40Vin, 2A Sync. Buck-Boost Converter

The LTC6908IDCB-1#TRMPBF is an Analog Devices 2-phase programmable oscillator with spread-spectrum frequency modulation (SSFM), operating from 10 kHz to 10 MHz with a 9 ns maximum fall time in a compact surface-mount SOT-23 package. It reduces EMI by spreading the clock spectrum and provides two phase-offset outputs for dual-phase switching regulators. Available from stock worldwide with competitive pricing.

Analog Devices LTC6409IUDB#TRMPBF is a high-speed differential amplifier with 10GHz gain-bandwidth product and 1.1nV/rtHz input voltage noise. Features 85dB typical CMRR and 60dB minimum CMRR with voltage-feedback architecture. Available from stock worldwide with fast shipping.

The LT3066EMSE-3.3#TRPBF is a 45 V input, 500 mA fixed 3.3 V low-dropout linear regulator with 0.3 V typical dropout, programmable current limit, output discharge, and low noise performance in a 12-pin MSOP package. From $4.80 in stock worldwide shipping.

LTC6268HS8-10#TRPBF is a single precision rail-to-rail output op-amp from Analog Devices with 4 fA input bias current and 4 GHz gain-bandwidth product in an automotive-grade 8-pin SOIC package. Operates on ±2.625 V to ±5.25 V supplies for high-impedance transimpedance and precision sensor circuits. Available from stock with worldwide shipping.

LT6654AIS6-1.25#TRMPBF is a precision 1.25 V low-noise voltage reference from Analog Devices in 6-pin SOT-23 package, offering 10 ppm/°C temperature coefficient rated from -40°C to 85°C. Available with worldwide shipping.

High Speed Operational Amplifiers Dual 100MHz 3.6mA OA

The LT3999EMSE#PBF is a push-pull DC/DC switching controller from Analog Devices operating from 2.7 V to 36 V input with up to 1 MHz switching frequency, housed in an MSOP-10 package. It drives external MOSFETs for isolated power conversion in telecom, industrial, and automotive applications. Available from authorized distributors with worldwide shipping.

The LT3094EDD#PBF is a negative-rail ultralow noise and high PSRR LDO regulator delivering 500 mA at up to -20V input-output differential with a 0.235V typical dropout voltage. It is housed in a 12-pin DFN package for compact negative supply designs. From $6.20 in stock with worldwide shipping.

The LTC2185CUP#PBF is a dual-channel 16-bit 125 Msps low-power ADC from Analog Devices operating at 1.8 V supply with parallel LVDS outputs and 0.0114% maximum linearity error. It offers exceptional dynamic range performance for wideband communication and high-speed data acquisition systems.

Analog Devices LT3970IDDB-5#TRMPBF is an automotive-grade DC-DC step-down regulator accepting 4.2 V to 40 V input and providing a fixed 5 V output at up to 0.35 A in a 10-pin DFN package. Current-mode PWM control ensures stable regulation across wide input ranges. Available from stock with worldwide shipping.

Analog Devices LTM9011IY-14#PBF is a 14-bit, 125 Msps octal ADC µModule integrating 8 simultaneous-sampling channels with clock input, reference, and LVDS outputs in a 140-pin BGA package. It achieves 0.025% max linearity error with ±2V differential analog input for high-speed data acquisition. Available in stock with worldwide shipping.

Switching Voltage Regulators Mu Module Regulator W/ DPSM

LDO Voltage Regulators 3.3/5Vin 2A Ultra Low Noise LDO Fixed

RF Switch ICs High isolation SP DT,40GHz,fast switch

Analog Devices LT1567CMS8#TRPBF is a continuous-time active filter IC supporting 2nd/3rd order Chebyshev or Butterworth lowpass and 2nd order bandpass configurations up to 5 MHz cutoff, in an 8-pin SOIC package. Available worldwide with fast shipping.

LDO Voltage Regulators 1A Hi PSRR FT L DO 3.0Vo

Analog Devices LT1638IMS8#PBF is a dual rail-to-rail input/output precision op-amp with 1MHz gain-bandwidth, 88dB typical CMRR, and 0.05µA maximum bias current in an 8-pin MSOP package. Ideal for micropower single-supply signal conditioning. Available from stock worldwide with fast shipping.

LDO Voltage Regulators 1A Hi PSRR FT L DO 5.0Vo

Smoke Detectors Optical Smoke Detector Module

40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator

RS-422/RS-485 Interface IC 3.3V Full-Duplex 20Mbps RS485 Transceiver w/ Enables

Switching Controllers Synch, StepDown DC/DC Cntr w/Volt trking

Linear Voltage Regulators 2A LDO Fix V-out Family

LTC6101HVACS5#TRMPBF is a high-voltage, high-side current sense amplifier in a 5-pin SOT-23 package, supporting wide common-mode input voltages for accurate current monitoring in industrial and automotive power management circuits.

LTC6102HVCMS8#TRPBF is a high-voltage, zero-drift current sense amplifier in an MSOP-8 package. It delivers 50 µV maximum input offset voltage, 0.02 µA bias current, and operates from supplies up to 60 V. Available from stock worldwide with competitive pricing.

Comparator Single ±5.5V/11V 8-Pin MSOP T/R

Analog Devices LTC6363HMS8-2#PBF is a precision low-power differential amplifier and ADC driver with 35 MHz bandwidth, 112 dB typical CMRR, and 0.1 µA max bias current in an 8-pin MSOP package. From $6.00 in stock, worldwide shipping.

Analog Devices LTC6910-2CTS8#TRPBF is a digitally programmable variable-gain amplifier (VGA) with rail-to-rail input and output, operating from ±5.25 V or a single 10.5 V supply in an 8-pin TSOT-23 package. It features a minimum CMRR of 55 dB and up to 75 dB typical, with 3-bit gain control for precise signal conditioning. Available from authorized distributors with worldwide shipping.

The LT1004IZ-2.5#PBF is a two-terminal shunt voltage reference IC providing a precise 2.5 V output with ±0.8% accuracy, 20 mA maximum current, housed in a compact TO-92-3 package for portable and industrial designs.

LTC6910-3HTS8#TRPBF is a digitally controlled programmable gain instrumentation amplifier from Analog Devices, offering 11MHz bandwidth and 50dB minimum CMRR. It operates from dual supplies up to ±5.5V in a compact 8-pin SOT-23 package, enabling precision gain adjustment via digital inputs for sensor signal conditioning applications.

Comparator Single ±5.5V/11V 8-Pin MSOP Tube

The LTC6102HMS8-1#TRPBF is a zero-drift current sense amplifier with a shutdown pin, featuring 50 µV maximum input offset voltage and 0.02 µA maximum bias current for high-accuracy current monitoring. It is housed in an MSOP-8 package for compact power-management designs in industrial and automotive systems. Available from authorized distributors with worldwide shipping.

Analog Devices LTC1992-10IMS8#PBF is a fixed gain-of-10 fully differential input/output amplifier with 2 pA bias current, 60 dB CMRR, and 2500 µV max offset voltage in a compact MSOP-8 package, optimized for ADC driving and differential signal conditioning.

Analog Devices LTC1992CMS8#PBF is a 3 MHz differential amplifier with rail-to-rail output, 90 dB typical CMRR, and 0.25 nA maximum bias current in an 8-pin MSOP package. Suited for precision differential signal acquisition and ADC driving in industrial and medical instruments. Available from stock with worldwide shipping.

The LTC1562CN#PBF is an active RC quad universal filter IC from Analog Devices, supporting cutoff frequencies from 10 kHz to 150 kHz with four independent 2nd-order filter sections. Available in DIP-16 package with worldwide shipping.

Supervisory Circuits QUAD V#OLTAGE MONITOR & SEQUENCER

The LTC6655CHMS8-2.5#TRPBF is an ultra-low noise 2.5 V precision voltage reference with an output range of 2.4987 V to 2.5012 V and exceptional temperature stability. It features a single-output three-terminal design in a compact MSOP-8 package suitable for high-accuracy analog systems. Available from stock with worldwide shipping.

Digital to Analog Converters - DAC 12 BIT IC w/ Dbl Buffrd Byte Load