Analog Devices

Battery Charger Li-Ion 1300mA 4.2V 8-Pin MSOP EP Tube

HMC349LP4CETR is an integrated circuit by Analog Devices. Key specs include Quad Flat No-Lead, 17 pins. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Analog Devices LTC3531EDD-3.3#PBF is a 200mA synchronous buck-boost DC/DC converter with 1.8V to 5.5V input range, fixed 3.3V output, and compact 3x3 DFN-8 package for space-constrained portable applications.

Analog Devices LTC4121EUD-4.2#PBF is a 40V, 400mA synchronous step-down Li-ion battery charger in 16-lead QFN, offering programmable charge current, wide input range, and autonomous charging control for embedded systems.

LT3743EFE#PBF is an interface IC by Analog Devices. Key specs include JESD-609 Code: e3; Peak Reflow Temperature (Cel): 260. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

LTC1983ES6-5#TRPBF is a voltage regulator by Analog Devices. Key specs include Input Voltage-Max: 5.5 V; Input Voltage-Min: 5 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Analog Devices LT3971EMSE-3.3#PBF is a 40V input, 1.2A step-down switching regulator with fixed 3.3V output, 2 MHz switching frequency, and ultra-low 2 µA quiescent current, in a 10-pin MSOP package.

LDO Regulator Pos 1.2V 0.15A 4-Pin WLCSP T/R

LT1962EMS8-1.8#TRPBF is a voltage regulator by Analog Devices. Key specs include Dropout Voltage1-Max: 0.43 V; Dropout Voltage1-Nom: 0.27 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

LDO Voltage Regulators LDO 2.3Vout 150mA

OR Controller P-channel Dual 20-Pin QFN EP Tube

The LT8582EDKD#PBF is a dual 3A boost/inverting DC/DC converter with fault protection, operating from 2.5V to 22V input, featuring current-mode PWM control in a compact 24-pin SOIC package.

Digital Signal Processors & Controllers - DSP, DSC 266 MHz.Proc Blank rom EPAD PBfree LQFP

LTC3351IUFF#PBF is a hot-swappable supercapacitor charger and backup controller from Analog Devices. It supports 4.5 V to 35 V input and features integrated system monitoring with I2C telemetry. Ideal for industrial power backup and holdup applications requiring seamless energy transfer.

Op Amp Dual GP R-R I/O ±15V/30V Automotive 8-Pin MSOP Tube

Operational Amplifiers - Op Amps Quad uP R-to-R I/O Op Amp

Analog Devices LT4321HUF#PBF is a Power-over-Ethernet ideal diode bridge controller PMIC. It manages PoE rectification with low forward voltage drop, housed in a 16-pin QFN package for compact powered-device designs.

Single Transmitter/Receiver RS-422/RS-485 Automotive 8-Pin MSOP T/R

The AD9257 is a high-speed octal analog-to-digital converter from Analog Devices featuring 14-bit resolution at up to 65MSPS sample rate, designed for demanding medical imaging and communications applications. Operating from a 1.8V supply, it integrates 8 simultaneous ADC channels with LVDS serial output interfaces in a compact QFN package. Available from authorized Analog Devices distributors with worldwide in-stock shipping.

Analog Devices LTC2856CMS8-2#TRPBF is a 5 V half-duplex RS-485/RS-422 transceiver operating at up to 250 kbps with differential Schmitt trigger inputs and EIA-485-A/EIA-422 compliance in an 8-pin MSOP package. From $3.20 in stock, worldwide shipping.

ANALOG DEVICES - ADSP-2187NBSTZ-320 - FLOAT PT DSP, 16BIT, 80MHZ, LQFP-100

Digital Signal Processors & Controllers - DSP, DSC 16B 75 MIPS 2.75V 2 Serial Prts Host Prt

Single RS-422/RS-485 line transceiver in an automotive-grade 8-pin MSOP package with differential Schmitt trigger input. Supports half-duplex communication over cable runs of up to 1200 meters at data rates suitable for industrial networks. Available from stock worldwide with fast worldwide shipping.

Analog Devices LTC2856CMS8-1#PBF is an automotive-grade single RS-422/RS-485 line transceiver with differential Schmitt trigger input, 250 µA high-level input current, and TIA-485-A compliance in an 8-pin MSOP package for robust half-duplex serial communication.

High Speed Operational Amplifiers Dual R-to-R In/Out Low Distortion OA

Digital Signal Processors & Controllers - DSP, DSC 16B 75 MIPS 2.75V 2 Serial Prts Host Prt

High Speed Operational Amplifiers Dual R-to-R In/Out Low Distortion OA

Analog Devices LTC2941IMS8E#TRPBF is a single-channel Li-Ion battery gas gauge IC for automotive applications in an 8-pin MSOP-EP package, providing coulomb counting with adjustable threshold alerts for accurate state-of-charge monitoring.

Analog Devices LT1810CMS8#TRPBF is a dual rail-to-rail input/output high-speed operational amplifier with 86 dB CMRR and low distortion. Features voltage-feedback architecture with 68 dB minimum CMRR and 8 µA bias current in MSOP-8 package.

Analog Devices LT1810CMS8#PBF is a dual rail-to-rail input/output high-speed op-amp with 86dB typical CMRR, 8µA bias current at 25°C, and low distortion in an 8-pin MSOP package. Features voltage-feedback architecture with integrated frequency compensation for wideband signal conditioning. Available from stock worldwide with fast shipping.

The LTC3372EUK#TRPBF is a five-output automotive-grade step-down DC/DC controller supporting 2A, 2A, and up to 20A outputs at 2.1 MHz switching frequency. Input voltage range spans 4.5V to 60V. Available in a 48-pin QFN EP package with worldwide stock and shipping.

The LTC3531ES6-3#TRMPBF is a 200 mA synchronous buck-boost DC/DC converter with a 1.8 V to 5.5 V input range and fixed 3 V output using voltage-mode PWM control in a compact SOT-23-6 package. From $2.50 in stock worldwide shipping.

The LT8302HS8E#PBF is a micropower no-optocoupler isolated flyback converter IC with a 65V/4.5A internal switch, accepting input voltages from 3V to 42V. It uses current-mode resonant control for high efficiency and simplified design. From $4.50 in stock with worldwide shipping.

The LT3080IQ#PBF is a single-resistor adjustable LDO linear regulator delivering up to 1.1A output current with a 0.35V typical dropout voltage and 0.0036% load regulation. It features a 5-pin DDPAK package with an exposed die paddle for thermal management. From $5.80 in stock with worldwide shipping.

Switching Voltage Regulators 50mA/500mA ULP Buck VINOK w/ OD

The LTC2974CUP#PBF is an Analog Devices quad-channel digital power supply manager with PMBus interface, operating from 3.13 V to 3.47 V supply in a 64-pin QFN package. It monitors voltage, current, and power across 4 channels with adjustable thresholds and sequencing control. Available from stock worldwide with competitive pricing.

Switching Controllers 60V Low IQ Buck Controller Plus 4-Channel 8A Configurable Buck DC/DCs

LT8490EUKJ#TRPBF is a switching battery charger controller from Analog Devices supporting Lead-Acid, Li-FePO4, Li-Ion, and Li-Polymer batteries with 1.3 V to 80 V input range in a 64-pin QFN package. Adjustable thresholds enable multi-chemistry charging profiles. Available from stock with worldwide shipping.

LDO Regulator Pos 0V to 30V 1.1A Automotive 8-Pin MSOP EP T/R

Analog Devices LT1086CT-5#PBF is a fixed 5 V low-dropout linear regulator delivering up to 1.5 A output with a typical 1.3 V dropout voltage, accepting inputs from 6.5 V to 20 V in a TO-220 3-pin package. It provides robust regulation for logic and analog power rails requiring higher current than SOT-223 devices. Available from authorized distributors worldwide.

Digital to Analog Converters - DAC Single 2.7-5.5V 12bit I2C DAC in SC-70

The LTC6954IUFF-1#PBF is a low phase noise triple-output clock distribution divider and driver with three LVPECL outputs and Schmitt trigger input. Delivers ultralow additive phase noise for high-performance ADC and DAC clocking. Available in 36-pin QFN package with worldwide stock and shipping.

Analog Devices LTC4052EMS8E-4.2#TRPBF is a Lithium-Ion battery pulse charger IC with overcurrent protection, featuring a 4.2 V regulation voltage and single-channel charging. Offered in a compact 8-pin MSOP package with no external current-sense resistor required. Available from authorized distributors worldwide with competitive pricing and tape-and-reel packaging.

LTC3025IDC-1#TRMPBF is a 500 mA micropower adjustable very-low-dropout (VLDO) linear regulator with only 85 mV typical dropout voltage and 0.08% load regulation in a 6-pin DFN package, ideal for low-voltage battery-powered and portable applications.

The LT8608EMSE#PBF is an automotive-grade synchronous step-down DC-DC converter operating from 3 V to 42 V input, delivering 1.5 A output at 0.778 V minimum from Analog Devices. Available in a compact 10-pin MSOP EP package with AEC-Q100 qualification, competitively priced and in stock with worldwide shipping.

Active Filters 1 to 2 GHz Tunable BPF

LT6100IDD#PBF is a 8 pins amplifier by Analog Devices. Key specs: 8 pins, Small Outline No-lead package, Current Sense Amplifiers Gain Selectable High Side Current Sense Amplifier. From quote-based sourcing, in stock checks support worldwide shipping.

Analog Devices LT6100HMS8#TRPBF is a gain-selectable high-side current sense amplifier in an 8-pin MSOP package for accurate power monitoring. Key specs: selectable gain, single-function analog IC, small-outline thin-profile shrink package, JESD-609 e3 compliant. Available from stock worldwide.

The LT6100CMS8#TRPBF is a gain-selectable high-side current sense amplifier from Analog Devices, offering user-configurable gain settings for flexible current monitoring across a wide common-mode voltage range in an MSOP-8 package. It simplifies precision current measurement in motor drives, battery systems, and power supplies without discrete instrumentation amplifier circuits. Available from authorized distributors in tape-and-reel packaging with worldwide shipping.

ANALOG DEVICES - ADP162ACBZ-3.0-R7 - Fixed LDO Voltage Regulator, 2.2V to 5.5V, 105mV Dropout, 3Vout, 150mAout, WLCSP-4