Analog Devices

Voltage References Shunt Voltage Reference in WLP package

The LT3061IMS8E#PBF is a 45V input, micropower, low noise 100mA LDO linear regulator from Analog Devices. It features an ultra-low 0.25V typical dropout voltage and adjustable output with output discharge capability. Available in MSOP-8 package with low quiescent current for battery-powered designs.

Analog Devices MAXM15065AMB+ is a complete Himalaya uSLIC step-down power module integrating a switching regulator, inductor, and passives in a 3 x 2.6 x 1.5 mm package. It accepts 4.5 V to 60 V input and delivers 300 mA output with PWM/PFM control modes. Available from authorized distributors with worldwide shipping.

Analog Devices LTC4307IMS8-1#PBF is a low-offset I2C bus buffer in an 8-pin MSOP package that isolates capacitive loads and extends I2C bus reach. Supports under-voltage lockout protection with 50 mA sink current capacity. Available RoHS-compliant for industrial and consumer I2C system designs worldwide.

400mV to 5.5V Input, nanoPower Synchronous Boost Converter with True Shutdown

Switching Voltage Regulators 0.9V to 5V, 500mA Input Current Limit Ultra Low Power Boost Converter with True Shutdown

Supervisory Circuits Low-Power, Single/Dual-Voltage P Reset Circuits with Capacitor-Adjustable Reset Timeout Delay

1.5A, Low Noise, Fast Transient Response LDO Regulators

Analog Devices LTC4367CMS8#TRPBF is a single-channel overvoltage, undervoltage, and reverse supply protection controller rated to 100 V with an adjustable 32 ms power-on delay in an 8-pin MSOP package. It controls an external N-channel MOSFET to protect downstream circuitry from hazardous input conditions. Available globally with worldwide shipping.

Operational Amplifiers - Op Amps Single-Supply Rail-Rail

Analog Devices LT1085CT-12 is a 3A low dropout positive fixed voltage regulator outputting 12V, with a maximum dropout voltage of 1.5V and input voltage range of 13.5V to 25V. It features line regulation of 0.025% and is housed in a TO-220 package for easy heatsinking, making it ideal for regulated power supply designs. Available in stock worldwide with fast shipping.

MAXIM INTEGRATED PRODUCTS - MAX860ESA+T - DC/DC Charge Pump Adjustable Voltage Regulator, 1.5V to 5.5V in, -5.5V to -1.5V/100mA out, NSOIC-8

Switching Voltage Regulators 0.8A Low-Noise 1MHz Step-Up

The LTC1658CMS8 is a 14-bit rail-to-rail micropower digital-to-analog converter from Analog Devices in an MSOP-8 package. It delivers 14-bit resolution with less than 1 LSB INL at supply voltages from 2.7 V to 5.5 V using a serial SPI interface. Available from stock worldwide with fast shipping.

IC OPAMP VFB 400MHZ 8SO

Switching Voltage Regulators 0.8A, Low-Noise, 1MHz, Step-Up DC-DC Converter

Switching Voltage Regulators No Rsense, Current Mode Boost DC/DC Controller

Switching Voltage Regulators 0.5A, 1.4MHz Step-Down Converter

RF Amplifier 50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Analog/Digital VGA

ADI SOT23 Single,Rail-to-Rail Vltg-Fdbk Amp

Boosted Class-D Amplifier with Integrated Dynamic Speaker Management

Switching Voltage Regulators For MAXM17904: 4.5V to 24V Input, 3.3V, 300mA Output, Integrated Inductor, Compact Step-Do

LTC7862EUFD#PBF is a 140 V high-efficiency input fault-protection controller in a 20-lead QFN package. It features adjustable overcurrent and overvoltage thresholds to protect downstream circuits on high-voltage industrial and telecom supply rails.

Switching Voltage Regulators 0.9V to 5V, 500mA Input Current Limit Ultra Low Power Boost Converter with True Shutdown

Voltage References Ultra-High-Precision, Ultra-Low-Noise, Series Voltage Reference

Switching Voltage Regulators 15V, 1.5A Synchronous Step-Up DC/DC Converter with Output Disconnect

Digital to Analog Converters - DAC 10-B R2R uP DAC w/ 2-Wire Int

Digital to Analog Converters - DAC 10-B R2R uP DAC w/ 2-Wire Int

Digital to Analog Converters - DAC 14-bit Micropower DAC in MSOP Package

Switching Voltage Regulators 15V, 1.5A Synchronous Step-Up DC/DC Converter with Output Disconnect

Voltage References 2.5V Ref

4MSPS Dual Simultaneous Sampling, 16-BIT SAR ADC, Differential Input

Voltage References 2.5V Ref

DAC 1-CH R-2R 12-bit 8-Pin SOIC N T/R

LDO Voltage Regulators 45v Vin, Micropower, Low Noise 100mA LDO with Output Discharge

3.0 V to 5.5 V, ±12 kV IEC ESD Protected, Full Duplex 500 kbps RS-485 Transceiver

MAXIM INTEGRATED PRODUCTS - MAX6504UKN015+T - TEMPERATURE SENSOR, 0.5DEG C, SOT-23-5

Switching Controllers Isolated Flyback controller w/SR

LDO Regulator Pos 0.6V to 19V 0.1A Automotive 8-Pin MSOP EP Tube

The MAX14515AEWA+ is a high-voltage liquid lens driver IC designed to control variable-focus liquid lens modules, featuring high-voltage output capability up to 70 V, available in a compact 8-ball WLCSP package for miniaturized optical autofocus systems.

Analog Comparators Micropower, Ultra-Small, Single/Dual/Quad Single-Supply Comparators

Voltage References Ultra-High-Precision SOT23 Series Voltage Reference

IC SWITCH SPDT 8SOIC

The LTC3376EY#PBF is a multi-output 8-channel parallelable 1 A buck DC-DC switching regulator from Analog Devices. It supports input voltages from 3 V to 20 V and adjustable output voltages from 0.4 V to 16.6 V using current-mode PWM control. Designed for FPGAs, DSPs, and complex multi-rail power systems in telecom and industrial equipment.

Analog Comparators Micropower, Ultra-Small, Single/Dual/Quad Single-Supply Comparators

Conv DC-DC 7.3V to 45V Synchronous Step Down Single-Out 2.5V to 50V 10A 5-Pin(5+Tab) TO-220 Tube

Voltage References 1uA Precision SOT-23 Reference 20ppm, 0.1%

Analog Devices LTC4233HWHH#PBF is a hot swap voltage controller supporting 2.9 V to 15 V input range with 10 A guaranteed safe operating area. It provides adjustable overcurrent threshold, inrush current limiting, and single-channel control for high-reliability board insertion without power interruption.

Analog Switch ICs High-Current, 25Ohm, SPDT, CMOS Analog Switches

Liquid Lens Driver IC, I2C Interface, 2.7 to 5.5 V, WLP-8