Analog Devices

The MAX31341BEWC+ is a low-current real-time clock (RTC) IC from Analog Devices with an I2C interface and integrated power management. It features a 12-pin WLCSP package with a peak reflow temperature rating of 260°C and is suitable for IoT wearables, portable medical devices, and battery-backed timekeeping systems. Introduced in 2019, it targets ultra-low power always-on clocking applications.

LTC3829IFE#PBF is an Analog Devices 3-phase synchronous PWM buck controller with differential remote sensing, 4.5 V to 38 V input, current-mode control, and integrated gate drivers. In 38-lead FE package. From $12.80 in stock worldwide shipping.

Switching Voltage Regulators 100V Buck/Boost CTLr with Pass-Thru

Analog Devices LTC4070 is a single-cell lithium-ion/polymer battery shunt charger designed for energy harvesting and always-on IoT applications. It supports a programmable float voltage and operates with input currents as low as 1 µA, housed in an 8-pin MSOP package for compact wireless node designs.

Digital to Analog Converters - DAC Pin-/Software-Compatible, 16-/12-Bit, Voltage-Output DACs

Switching Voltage Regulators Dual 800mA Buck Reg w/2 300mA LDO's

Low Voltage, 4A DC/DC μModule (Power Module) Regulator with Tracking

RF Detector 300MHz to 7000MHz 12dBm 6-Pin SC-70 T/R

LTM4686IV#PBF is a dual-output DC-DC µModule power regulator by Analog Devices with 4.5 V to 17 V input range and current-mode PWM control. Key specs: dual switching controller, 12 V nominal input, high integration in a compact LGA package. Available in stock with worldwide shipping.

Modulator / Demodulator 0.75GHz-1.2GHz Quad Mod/Demod

The Analog Devices LTC6258IS6#TRPBF is a single rail-to-rail input/output op-amp with 1.3 MHz gain-bandwidth product, 23 µA supply current, and 64 dB minimum CMRR, housed in a 6-pin SOT-23 package for power-sensitive sensor applications. From $1.80 in stock worldwide shipping.

IMPROVED LT3952; 60V/4A BOOST LE

Analog Devices HMC425A is a GaAs MMIC 6-bit digital attenuator operating from DC to 4 GHz, providing 0 dB to 31.5 dB attenuation in 0.5 dB steps with parallel TTL control. It supports 50 Ω systems in a compact QFN package for RF signal level control in communications and test equipment.

Surge Suppressors 100V OV, UV and Reverse Supply Protection Controller with 0.5ms On Delay

The LTC4307IMS8#TRPBF is a hot-swappable 2-wire bus buffer and signal repeater with level shifting. It supports I2C and SMBus interfaces and enables live board insertion without bus lockup. Packaged in a compact 8-pin MSOP, it suits servers, telecom cards, and hot-swap backplane designs.

MAX14891EATP+ is a quad RS-485/RS-422 line receiver from Analog Devices in a 20-pin TQFN package with 3 mA output current and true output polarity. Supports high-speed differential data reception for industrial network links. Available from stock worldwide with fast shipping.

MAXIM INTEGRATED PRODUCTS - MAX20332EWE+ - Battery Supervisor & Monitor, Li-Ion, 1 Cell, I2C Interface, 2.8V to 5.5V Supply, WLP-16

The MAX4403AUD+ is a quad rail-to-rail output op-amp from Analog Devices with shutdown capability, designed for single-supply low-cost applications. It features a common-mode rejection ratio of 84 dB typical, ultra-low bias current of 0.1 nA maximum, and voltage-feedback architecture in a 14-pin TSSOP package. Suitable for battery-powered portable instruments, sensor signal conditioning, and active filter designs.

3.0 V to 5.5 V, ±12 kV IEC ESD Protected, Half Duplex 50 Mbps RS-485 Transceiver

MAX4752EGE+T is a quad SPST analog switch IC from Analog Devices featuring 0.9 Ω on-resistance, normally-closed contacts, and single 3 V supply operation in a 16-pin 3×3 mm LFCSP package. From $2.50 in stock worldwide shipping.

IC SWITCH QUAD SPST 16QFN

Analog Switch ICs 0.9Ohm Quad SPST Analog Switch

LTC4307IMS8-1#TRPBF is a low-offset I2C bus buffer from Analog Devices that isolates bus capacitance and supports up to 400 kHz Fast-mode I2C, operating from 2.7 V to 5.5 V. From $2.80 in stock worldwide shipping.

LTC4307IMS8#PBF is a hot-swappable 2-wire bus buffer and I2C isolator from Analog Devices in an MSOP-8 package. It supports up to 400 kHz Fast-Mode I2C with bus voltage levels from 2.7 V to 5.5 V and includes stuck-bus recovery. Ideal for server backplanes, industrial sensors, and telecom equipment requiring fault-tolerant I2C bus expansion.

MAXIM INTEGRATED PRODUCTS - MAX4751EUD+ - ANALOGUE SWITCH, QUAD, TSSOP-14

Differential Amplifiers High Current Line Driver for Powerline Communications

IC DAC 16BIT SGL R-R VOUT 10DFN

45V VIN, 500mA Low Noise, Linear Regulator with Programmable Current Limit and Power Good

LDO Voltage Regulators 20V, 200mA, Ultralow Noise, Ultrahigh PSRR RF Linear Regulator

Operational Amplifiers - Op Amps Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown

Switching Voltage Regulators 100V Current Mode Synch Controller

Differential Amplifiers High Current Line Driver for Powerline Communications

LTC3637EMSE#TRPBF is a wide-input 76 V, 1 A step-down switching regulator in a 16-lead MSOP with exposed pad. It supports fixed 3.3 V/5 V outputs and adjustable output from 0.8 V to 76 V using voltage-mode burst-mode control.

IC TRANSLATR/RCVR/DVR HEX 20SOIC

RS-232 Interface IC +5V-Powered, Multichannel RS-232 Drivers/Receivers

Low-Power I2C Temperature Sensor in WLP Package

The LTC3526B is a 1 MHz synchronous step-up DC/DC converter delivering up to 500 mA output current from a 1 V to 4.5 V input. Housed in a compact 2 mm × 2 mm DFN package, it uses current-mode PWM control and also operates in adjustable mode from 1.6 V to 5.25 V. Ideal for battery-powered devices, wireless sensors, and portable electronics requiring regulated power.

Precision Amplifiers High-Output-Drive, Precision, Low-Power, Single-Supply, Rail-to-Rail I/O Op Amps with Shutdown

IC MIXER 400MHZ-3.8GHZ DWN 16QFN

Linear Voltage Regulators 150mA LDO Adj Vout

3.0 V to 5.5 V, ±12 kV IEC ESD Protected, Full Duplex 50 Mbps RS-485 Transceiver

LED Lighting Drivers 3x Out LED Drvr w/ 3000:1 PWM Dimming

3.0 V to 5.5 V with VIO, ±12 kV IEC ESD Protected, Half Duplex 50 Mbps RS-485 Transceiver

Analog Devices MAXM15464AMB+ is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 10 pins, 4.5 V, 42 V in 10-CSP_BGA_EM-3X2.6X1.5. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Operational Amplifiers - Op Amps Single/Dual/Quad, Low-Cost, UCSP/SOT23, Low-Power, Rail-to-Rail I/O Op Amps

► TIA/EIA RS-485 compliant over full supply range ► 3.0 V to 5.5 V operating voltage range on VCC ► 1.62 V to 5.5 V VIO logic supply option available ► ESD protection on the bus pins ► IEC 61000-4-2 ≥ ±12 kV contact discharge ► IEC 61000-4-2 ≥ ±12 kV air discharge ► HBM ≥ ±30 kV ► Full hot swap support (glitch free power-up/power-down) ► High speed 50 Mbps data rate (ADM3065E/ADM3066E/ ADM3067E/ADM3068E) ► Low speed 500 kbps data rate for long cables (ADM3061E/ ADM3062E/ADM3063E/ADM3064E) ► Full

Battery Management 2A 1-Cell Li+ DC-DC Charger for USB and Adapter Power

Power Switch ICs - POE / LAN LTPoE++/IEEE 802.3bt PD Interface Contro

Voltage References Low Noise, High Current, Precision Reference

Surge Suppressors 100V OV, UV and Reverse Supply Protection Controller with 32ms On Delay