Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
11,369
Total Products
25
Categories
All Analog Devices Components
Showing 1,851–1,900 of 11,369
Switching Voltage Regulators 1.2A, Buck Sw Reg in 3 x 3 DFN
150V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller with PassThru
250mA, 4V to 80V Low Dropout Micropower Linear Regulator
The LTC2052HVCS is a quad zero-drift operational amplifier from Analog Devices, delivering ultra-precision performance with a maximum input offset voltage of just 3 µV and 130 dB typical CMRR across 4 independent channels. It operates from supplies up to ±6 V and is housed in a 14-pin SOIC package. Ideal for precision weigh scales, medical instrumentation, and high-accuracy signal conditioning requiring worldwide shipping.
4.40 MM WIDTH, LEAD FREE, PLASTIC, TSSOP-20
1.5A, Low Noise, Fast Transient Response LDO Regulators
High Speed Operational Amplifiers 1x 220MHz, 1500V/ s Op Amps w/ Progmabl
Interface - I/O Expanders I C Port Expander with Eight Inputs and Maskable Transition Detection
Op Amp Dual GP R-R O/P 11V 8-Pin MSOP
Linear Voltage Regulators Prec Linear Reg Controller
1.5A, Low Noise, Fast Transient Response LDO Regulators
MAXIM INTEGRATED PRODUCTS - MAX6501UKP115+T - TEMPERATURE SENSOR, 0.5DEG C, SOT-23-5
MAXIM INTEGRATED PRODUCTS - MAX6501UKP085+T - TEMPERATURE SENSOR, 0.5DEG C, SOT-23-5
DC/DC Cntrlr Single-OUT Step Down/Step Up 650kHz Automotive 28-Pin TSSOP EP T/R
LTC3240EDC-3.3 is a switched-capacitor charge pump DC/DC converter providing a fixed 3.3 V regulated output from an input range of 1.8 V to 5.5 V, supporting both step-up and step-down operation. It delivers up to 0.45 A output current in a compact 6-pin SOT-23 package. Ideal for battery-powered portable devices, IoT nodes, and low-power embedded systems requiring a stable 3.3 V rail.
I2C Port Expander with Eight Inputs and Maskable Transition Detection
Switching Voltage Regulators 42V, 2A Synchronous Step-Down Regulator with 2.5uA Quiescent Current
LTC3240EDC-3.3#TRPBF is a 3.3V fixed-output step-up/step-down charge pump DC/DC converter operating from 1.8V to 5.5V input in a 6-pin DFN package. It uses a switched-capacitor topology requiring no inductor, simplifying PCB layout. Available in tape-and-reel from stock worldwide with fast shipping.
LDO Voltage Regulators Tape 100mA Low Noise Low Dropout Micropower Regulators in TSOT-23
MAXIM INTEGRATED PRODUCTS - MAX6501UKP095+T - TEMPERATURE SWITCH, 0.5DEG C, SOT-23-8
Digital Signal Processors & Controllers - DSP, DSC 2x SHARC, LQFP Package, 450 MHz
0.118 X 0.118 INCH, PLASTIC, SMT, SOT-26, 6 PIN
Voltage References 3ppm/ C Drift, Low Noise, Buffered Reference
The MAX31341BEWC+ is a low-current real-time clock (RTC) IC from Analog Devices with an I2C interface and integrated power management. It features a 12-pin WLCSP package with a peak reflow temperature rating of 260°C and is suitable for IoT wearables, portable medical devices, and battery-backed timekeeping systems. Introduced in 2019, it targets ultra-low power always-on clocking applications.
LTC3829IFE#PBF is an Analog Devices 3-phase synchronous PWM buck controller with differential remote sensing, 4.5 V to 38 V input, current-mode control, and integrated gate drivers. In 38-lead FE package. From $12.80 in stock worldwide shipping.
Switching Voltage Regulators 100V Buck/Boost CTLr with Pass-Thru
Analog Devices LTC4070 is a single-cell lithium-ion/polymer battery shunt charger designed for energy harvesting and always-on IoT applications. It supports a programmable float voltage and operates with input currents as low as 1 µA, housed in an 8-pin MSOP package for compact wireless node designs.
Digital to Analog Converters - DAC Pin-/Software-Compatible, 16-/12-Bit, Voltage-Output DACs
Switching Voltage Regulators Dual 800mA Buck Reg w/2 300mA LDO's
Low Voltage, 4A DC/DC μModule (Power Module) Regulator with Tracking
RF Detector 300MHz to 7000MHz 12dBm 6-Pin SC-70 T/R
LTM4686IV#PBF is a dual-output DC-DC µModule power regulator by Analog Devices with 4.5 V to 17 V input range and current-mode PWM control. Key specs: dual switching controller, 12 V nominal input, high integration in a compact LGA package. Available in stock with worldwide shipping.
Modulator / Demodulator 0.75GHz-1.2GHz Quad Mod/Demod
The Analog Devices LTC6258IS6#TRPBF is a single rail-to-rail input/output op-amp with 1.3 MHz gain-bandwidth product, 23 µA supply current, and 64 dB minimum CMRR, housed in a 6-pin SOT-23 package for power-sensitive sensor applications. From $1.80 in stock worldwide shipping.
IMPROVED LT3952; 60V/4A BOOST LE
Analog Devices HMC425A is a GaAs MMIC 6-bit digital attenuator operating from DC to 4 GHz, providing 0 dB to 31.5 dB attenuation in 0.5 dB steps with parallel TTL control. It supports 50 Ω systems in a compact QFN package for RF signal level control in communications and test equipment.
Surge Suppressors 100V OV, UV and Reverse Supply Protection Controller with 0.5ms On Delay
The LTC4307IMS8#TRPBF is a hot-swappable 2-wire bus buffer and signal repeater with level shifting. It supports I2C and SMBus interfaces and enables live board insertion without bus lockup. Packaged in a compact 8-pin MSOP, it suits servers, telecom cards, and hot-swap backplane designs.
MAX14891EATP+ is a quad RS-485/RS-422 line receiver from Analog Devices in a 20-pin TQFN package with 3 mA output current and true output polarity. Supports high-speed differential data reception for industrial network links. Available from stock worldwide with fast shipping.
The MAX4403AUD+ is a quad rail-to-rail output op-amp from Analog Devices with shutdown capability, designed for single-supply low-cost applications. It features a common-mode rejection ratio of 84 dB typical, ultra-low bias current of 0.1 nA maximum, and voltage-feedback architecture in a 14-pin TSSOP package. Suitable for battery-powered portable instruments, sensor signal conditioning, and active filter designs.
3.0 V to 5.5 V, ±12 kV IEC ESD Protected, Half Duplex 50 Mbps RS-485 Transceiver
MAX4752EGE+T is a quad SPST analog switch IC from Analog Devices featuring 0.9 Ω on-resistance, normally-closed contacts, and single 3 V supply operation in a 16-pin 3×3 mm LFCSP package. From $2.50 in stock worldwide shipping.
IC SWITCH QUAD SPST 16QFN
Analog Switch ICs 0.9Ohm Quad SPST Analog Switch
LTC4307IMS8-1#TRPBF is a low-offset I2C bus buffer from Analog Devices that isolates bus capacitance and supports up to 400 kHz Fast-mode I2C, operating from 2.7 V to 5.5 V. From $2.80 in stock worldwide shipping.
LTC4307IMS8#PBF is a hot-swappable 2-wire bus buffer and I2C isolator from Analog Devices in an MSOP-8 package. It supports up to 400 kHz Fast-Mode I2C with bus voltage levels from 2.7 V to 5.5 V and includes stuck-bus recovery. Ideal for server backplanes, industrial sensors, and telecom equipment requiring fault-tolerant I2C bus expansion.
MAXIM INTEGRATED PRODUCTS - MAX4751EUD+ - ANALOGUE SWITCH, QUAD, TSSOP-14
Differential Amplifiers High Current Line Driver for Powerline Communications
IC DAC 16BIT SGL R-R VOUT 10DFN
45V VIN, 500mA Low Noise, Linear Regulator with Programmable Current Limit and Power Good
Need Analog Devices Components?
Get competitive quotes from authorized China distributors
Request a Quote