Analog Devices

Switching Voltage Regulators 4 to 20mA loop buck regulator

Analog Devices LTC4312IDE#PBF is a 2-channel automotive-grade I2C bus buffer in a 14-pin DFN EP package, enabling hot-swap bus isolation and capacitance buffering up to 400 kHz Fast Mode. Supports 2.7 V to 5.5 V supply and -40°C to 125°C AEC-Q100 operation. Available from stock with worldwide shipping.

Analog Devices MAX4805ACTJ+T is an octal (8-channel) general-purpose voltage-feedback op-amp with 44 MHz bandwidth and 2.264 µA maximum bias current in a compact 32-pin TQFN package. It integrates 8 independent amplifier circuits for multichannel signal conditioning. Available in tape and reel with worldwide shipping.

0.300 INCH, LEAD FREE, PLASTIC, DIP-8

The HMC349AMS8GTR is a GaAs SPDT RF switch operating from 100 MHz to 4 GHz with high isolation and nonreflective design. It features CMOS-compatible control, 50 Ω impedance, and up to 33.5 dBm input power handling. Ideal for test equipment, wireless infrastructure, and military communications.

MAXM86161EFD+ is a single-supply integrated optical module from Analog Devices designed for heart rate (HR) and SpO2 measurement. It integrates a 14-LGA optical module with 1 channel and supports continuous biometric monitoring. Ideal for wearable health devices, fitness trackers, and medical grade pulse oximetry systems.

Selectable 1× or 2× interpolation filter Support input signal bandwidth up to 575 MHz Very small inherent latency variation: <2 DAC clock cycles Proprietary low spurious and distortion design 6-carrier GSM ACLR = 79 dBc at 200 MHz IF SFDR >85 dBc (bandwidth = 300 MHz) at zero IF Flexible 16-bit LVDS interface Supports word and byte load Multiple chip synchronization Fixed latency and data generator latency compensation FIFO eases system timing and includes error detection High performance, low no

Analog Devices MAX16128UAACAC+ is a single-channel automotive-grade load-dump and reverse-voltage protection controller in a compact 8-pin TSSOP package, designed to protect downstream electronics from transients and fault conditions on 12 V automotive supply rails. It controls an external P-channel MOSFET to clamp load-dump pulses up to 40 V and block reverse polarity events, preventing damage to sensitive ICs. Available with worldwide shipping from stock.

Digital to Analog Converters - DAC 8-Bit 2Ch Precision DAC

LTM4637IY#PBF is a µModule DC/DC step-down regulator from Analog Devices featuring adjustable output voltage from 0.6 V to 5.5 V, input voltage range of 4.5 V to 20 V, and current-mode PWM control. The device integrates inductors, MOSFETs, and control circuitry in a compact BGA package for high-density power designs. Available through authorized distributors with worldwide shipping.

The LT6658AIMSE-2.5#PBF is a precision 2.5 V automotive-grade voltage reference from Analog Devices capable of sourcing and sinking up to 150 mA in a 16-pin MSOP with exposed pad. It delivers dual buffered outputs with tight ±500 µV initial accuracy for demanding ADC, DAC, and precision measurement applications. Available from stock worldwide.

The LTC2600IUFD#PBF by Analog Devices is an octal 16-bit rail-to-rail DAC housed in a 20-lead QFN package. It communicates via a serial interface using binary input format with a maximum linearity error of 0.0977%, delivering precision analog outputs for industrial control and instrumentation applications. Available with lead-free (PBF) construction for RoHS compliance.

5.5V Input, 1.8A/3.1A Switch Buck-Boost Converter with 6μA IQ

5.5V Input, 1.8A/3.1A Switch Buck-Boost Converter with 6μA IQ

Quad Current-Sense Amplifier with Overcurrent Threshold Comparators

Analog Devices MAX1193ETI+T is a dual-channel 8-bit flash ADC sampling at up to 45 Msps from a 3.6 V supply, with ±0.512 V differential analog input range in a 28-pin LFCSP package. Its parallel output interface and low linearity error of 0.39% enable high-speed signal digitization for imaging and communications applications. Available from authorized distributors with worldwide shipping.

Analog Devices LTC3300IUK-2#PBF is an addressable high-efficiency bidirectional multicell battery balancer IC designed for Li-ion and LiFePO4 battery stack management with adjustable balancing thresholds. It supports daisy-chain addressing for scalable multi-IC battery management systems in a 48-pin QFN package. Available with worldwide shipping for EV, energy storage, and portable power applications.

PLASTIC, DIP-16

Supervisory Circuits Single uPower Reset Circuit

Digital Isolators Four Channel, Low Power, High Speed, Digital Isolator

LTC2625CGN#PBF is an octal 12-bit I2C voltage-output DAC with a maximum analog output of 5.5V and less than 0.1% linearity error in a 16-pin SOIC package. It uses a serial binary input format, enabling easy multi-channel voltage control from a 2-wire I2C bus. Available from stock with worldwide shipping.

The Analog Devices LTC3220IPF#PBF is a universal multi-output LED driver delivering up to 360 mA total output current with serial interface control and 18 output channels. It operates from a single supply and uses a 28-pin QFN package for compact PCB integration. Available globally in lead-free (PBF) packaging for RoHS-compliant designs.

Analog Devices LT1786FCS#TRPBF is a CCFL voltage regulator IC with current-mode PWM control, supporting input voltages from 4.5 V to 30 V in a 16-pin SOIC package. Delivers precise fluorescent lamp brightness control with single-output regulation. Available from global distributors with worldwide shipping.

The LTM4611IV#PBF is a complete 15A DC/DC step-down µModule regulator operating from 1.5V to 5.5V input with adjustable output voltage from 0.8V to 5V in a compact 133-ball LGA package. It integrates a current-mode PWM controller, power switches, inductor, and passive components for minimal external BOM. Available with worldwide shipping.

Analog Devices LT1009S8#TRPBF is a precision 2.5 V two-terminal voltage reference in an 8-pin SOIC package with adjustable output up to ±5%. Delivers high accuracy with low temperature coefficient suitable for data converters and precision analog circuits. Available in RoHS-compliant tape-and-reel format with worldwide stock and fast shipping.

400mV to 5.5V Input, nanoPower Synchronous Boost Converter with True Shutdown

LT8580EMS8E#TRPBF is an Analog Devices automotive-grade current-mode PWM boost DC-DC converter accepting 2.55 V to 40 V input and stepping up to 65 V output, housed in a thermally enhanced 8-pin MSOP-EP package for compact high-voltage designs. Available in tape-and-reel with worldwide shipping.

High-Precision Voltage Reference with Temperature Sensor

Switching Voltage Regulators 2.2MHz Inverting DC/DC Converter in 5-Lead SOT-23

Analog Devices LT3572EUF#TRPBF is a dual 500mA piezo driver combined with a 900mA boost converter in a 20-lead QFN package, operating from 2.5V to 10V input. It uses current-mode PWM control for efficient haptic feedback and boost regulation. Suitable for portable and wearable applications with space constraints.

Switching Voltage Regulators 2.5A, 15V Monolithic Synchronous Step-Down Regulator

Analog Devices LTC7003HMSE#PBF is a fast 65 V protected high-side NMOS static switch gate driver in a 16-lead MSOP package. Features Schmitt trigger input, open-drain output, and robust protection for reliable high-side MOSFET switching. Available from stock with worldwide shipping.

Power Management Specialized - PMIC Vega - VE12 Derivative MPPT to work in VE29 platform in conjunction with AM58

LT1675CMS8-1#TRPBF is a triple 2:1 analog video multiplexer from Analog Devices in a compact 8-pin MSOP package, operating from ±5 V dual supplies. It delivers high bandwidth switching for video signal routing with minimal signal degradation.

MAXM17904AMB+ is a non-isolated point-of-load DC-DC converter module delivering 3.3V at 300mA from a 4.5V to 24V input supply. Features current-mode PWM control in a compact 10-CSP BGA package measuring 3x2.6x1.5mm. Available from stock with worldwide shipping.

MAX19791ETX+ is a Analog Devices RF IC for RF signal chains and communications modules. It combines 36 pins, 36-LFCSP-6X6X0.75, -40°C to 100°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Switching Voltage Regulators High-Voltage Synch Step-Down Controller

Analog Devices LT1675CMS8-1#PBF is a triple 2:1 video multiplexer and amplifier in an 8-pin MSOP package. Operates from ±5 V supplies and switches 3 independent video channels with buffered outputs. Available in stock with worldwide shipping.

Boost, SEPIC Regulator Positive Output Step-Up, Step-Up/Step-Down DC-DC Controller IC 24-QFN (4x4) ,4.5V ~ 60V , 105kHz ~ 760kHz ,-40°C ~ 125°C (TJ)

Audio A/D Converter ICs 8-Channel PDM to I2S/TDM Converter

Analog Devices LT8601EUJ#PBF is an automotive-grade triple-output synchronous step-down DC-DC converter accepting 3V to 42V input and delivering 2.5A, 1.5A, and 1.8A on three independent outputs. Current-mode control with pulse-skip mode ensures high efficiency across light and heavy loads. Packaged in a compact 40-pin QFN with exposed pad for superior thermal performance in vehicle power systems.

Voltage References Low-Power, Fixed and Adjustable Reference with Shutdown in SOT23

IC VID LOSS-OF-SYNC ALARM SOT23

Integrates all typical PWM controller functions 7 PWM control signals Digital control loop Integrated programmable loop filters Programmable voltage line feedforward Dedicated soft start filter Remote and local voltage sense Primary and secondary side current sense Synchronous rectifier control Current sharing OrFET control I 2C interface Extensive fault detection and protection Extensive programming and telemetry Fast digital calibration User accessible EEPROM

The LT1021DCS8-10#PBF is an Analog Devices precision three-terminal 10V voltage reference in an SO-8 package, offering 20 ppm/°C maximum temperature coefficient and ±0.05% initial accuracy. It is in stock with worldwide shipping available.

The LT3905EUD#TRPBF is an Analog Devices 60 V boost DC-DC converter with integrated APD current monitor, accepting 2.7 V to 12 V input and delivering up to 60 V output using current-mode PWM control in a compact QFN package. It also supports adjustable output mode for flexible optical receiver biasing. Available in stock worldwide with competitive pricing.

n Synchronous Operation for Highest Efficiency and Reduced Heat Dissipation n Wide VIN Range: 4.5V to 60V (65V Abs Max); Operates Down to 2.3V After Start-Up n Output Voltage Up to 60V n ±1% 1.200V Reference Voltage n RSENSE or Inductor DCR Current Sensing n 100% Duty Cycle Capability for Synchronous MOSFET n Low Quiescent Current: 28μA n Phase-Lockable Frequency (75kHz to 850kHz) n Programmable Fixed Frequency (50kHz to 900kHz) n Power Good Output Voltage Monitor n Low Shutdown Current: 4µA n

Analog Devices MAX3223EEPP is a 15 kV ESD-protected RS-232 transceiver with AutoShutdown, integrating 1 driver and 1 receiver in a DIP-18 package. It operates from 3.0 V to 5.5 V supply with up to 250 kbps data rate and built-in 0.1 µF charge-pump capacitors. Suited for industrial serial communication interfaces, point-of-sale terminals, and embedded systems requiring robust ESD-protected RS-232 connectivity.

Conv DC-DC 3V to 25V Step Up Single-Out 1.2V to 35V 1.5A 8-Pin MSOP EP T/R

Multiplexer Switch ICs 4:1 2Ch Low Voltage Analog MUX