LTC2856IMS8-1#PBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock

Analog Devices LTC2856IMS8-1#PBF is a single-channel RS-422/RS-485 line transceiver with automotive-grade operation, packaged in an 8-pin MSOP. It supports differential signaling per EIA-485-A and TIA-485-A standards with a Schmitt trigger receiver input, operating across a wide supply range. Available from stock worldwide for industrial and automotive communication interface designs.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LTC2856IMS8-1#PBFSmall Outline Packages
Quick Facts
Manufacturer
Analog Devices
Package
Small Outline Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $2.4400(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Single RS-422/RS-485 transceiver with differential Schmitt trigger receiver input for noise-immune communication on long cable runs up to 1200 m at 100 kbps
  • Automotive-grade design operating from -40°C to +125°C with ±15 kV ESD protection on bus pins for reliable in-vehicle and harsh-environment installations
  • Compact 8-pin MSOP package (3 mm × 3 mm) reduces PCB footprint compared to SOIC-8 alternatives in space-constrained industrial and automotive node designs

Applications

The LTC2856IMS8-1#PBF is used in automotive body control modules, factory automation networks, and building automation systems requiring reliable RS-485 half-duplex or RS-422 full-duplex communication over twisted-pair cables at data rates up to 20 Mbps. Its differential signaling rejects common-mode noise on industrial bus lines of up to 1200 m, making it ideal for sensor networks, HVAC controllers, and motor drive communication interfaces. The automotive-grade temperature rating of -40°C to +125°C ensures reliable operation in under-hood and exterior vehicle electronics.

Specifications

Pbfree CodeNo
Manufacturer Package Code05-08-1660
YTEOL8.5
Differential OutputYES
Driver Number of Bits1
High Level Input Current-Max0.00025A
Input CharacteristicsDIFFERENTIAL SCHMITT TRIGGER
Interface IC TypeLINE TRANSCEIVER
Interface StandardEIA-485-A; TIA-485-A
JESD-30 CodeS-PDSO-G8
JESD-609 Codee3
Number of Functions1
Out Swing-Min1.5V
Output Characteristics3-STATE
Output Low Current-Max0.004A
Output PolarityCOMPLEMENTARY
Package Body MaterialPLASTIC/EPOXY
Package ShapeSQUARE
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Receive Delay-Max70ns
Receiver Number of Bits1
Supply Current-Max1.1mA
Supply Voltage-Max5.5V
Supply Voltage-Min4.5V
Supply Voltage-Nom5V
Supply Voltage1-Max5.5V
Supply Voltage1-Min4.5V
Supply Voltage1-Nom5V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Transmit Delay-Max50ns
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginMalaysia

Datasheet

LTC2856IMS8-1#PBF Datasheet Download

Official datasheet from Analog Devices

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What communication standards does the LTC2856IMS8-1#PBF support and at what maximum data rate?

The LTC2856IMS8-1#PBF supports both RS-485 (EIA-485-A/TIA-485-A) and RS-422 differential communication standards. It is capable of data rates up to 20 Mbps over short cable runs, or lower rates such as 100 kbps over cable lengths approaching 1200 m. The differential Schmitt trigger receiver input provides hysteresis for noise immunity in industrial and automotive bus environments.

How does the ESD protection level of LTC2856IMS8-1#PBF benefit automotive bus installations?

The LTC2856IMS8-1#PBF provides ±15 kV ESD protection on its RS-485 bus pins (A and B), significantly exceeding the minimum ±2 kV requirement of many standard industrial transceivers. This high ESD rating is critical in automotive environments where connector mating during service and cable routing near ignition sources can generate transient voltages that would damage less-protected transceivers, reducing field failures and warranty returns.

What package does the LTC2856IMS8-1#PBF use and how does it compare to SOIC-8 for PCB space savings?

The LTC2856IMS8-1#PBF uses an 8-pin MSOP package (JEDEC code S-PDSO-G8) with a body size of approximately 3.0 mm × 3.0 mm and 0.65 mm pin pitch. This is roughly 50% smaller in PCB footprint area compared to a standard SOIC-8 package (4.9 mm × 3.9 mm), enabling denser node placement in automotive ECUs and industrial backplane designs where up to 32 RS-485 nodes share a single differential bus pair.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $2.4400
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$2.7868$2.79
500+$2.6500$1325.00
1000+$2.4400$2440.00
pcs
Unit price: $2.7868 · Total: $2.79

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India