Analog Devices

Analog Devices MAX3987ETM+T is a quad 8.5 Gbps continuous-time linear equalizer and pre-emphasis driver, supporting four independent channels of serial data signal conditioning up to 8.5 Gbps per lane in a compact 48-pin LFCSP-7x7 mm package. Compensates PCB trace and cable losses while adding programmable pre-emphasis for downstream channel extension. Available from stock worldwide with fast global shipping.

Delay Lines / Timing Elements 5-Tap Economy Timing Element (Delay Line)

Delay Lines / Timing Elements 5-Tap Economy Timing Element (Delay Line)

Analog Devices LTC6994CS6-2#PBF is an integrated circuit for embedded control and industrial electronics designs. Key specs include 6 positions, 70 deg C maximum, VSSOP based on the available part data. From $0 inquire online for sourced stock and worldwide shipping support.

Ultra-Low Power Biometric Sensor Hub

LTC2165IUK#PBF is a 16-bit, 125 Msps analog-to-digital converter from Analog Devices featuring low-power 1.8 V operation and parallel CMOS outputs. It integrates two analog input channels with ±2 V input range and proprietary conversion method. Available in a compact 64-lead QFN package with worldwide shipping.

♦ Fully Compatible with the ISO 11898 Standard ♦ Autobaud Mode ♦ Short-Circuit Protection ♦ High-Speed Operation Up to 1Mbps ♦ Slope-Control Mode ♦ Low-Current Standby Mode ♦ Thermal Shutdown ♦ Transmit Data Dominant Timeout ♦ ±6kV Human Body Model ESD Protection ♦ Greater than ±12V Common-Mode Range

Analog Devices LT3582EUD-12#PBF is a programmable boost and single-inductor inverting DC/DC converter with one-time programmable output voltage. Operating from 2.55 V to 5.5 V input, it delivers a fixed 12 V boost or -12 V inverting output in a compact 16-pin QFN package.

MAXIM INTEGRATED PRODUCTS - MAX4491AUA+ - OP-AMP, 10MHZ, 10V/US, UMAX-8

● Biometric Sensor Hub Enables Faster Time to Market ● Finger-Based (Version A) Algorithms Measure: • Pulse Heart Rate • Pulse Blood Oxygen Saturation (SpO2) ● Wrist-Based (Version B) Algorithm Measures: • Pulse Heart Rate ● Wrist-Based or Ear-Based (Version C) Algorithms Measure: • Pulse Heart Rate • Pulse Blood Oxygen Saturation (SpO2) ● Finger-Based (Version D) Algorithms Measure: • Pulse Heart Rate • Pulse Blood Oxygen Saturation (SpO2) • Estimated Blood Pressure ● Both Raw and Processed D

Voltage References Precision High-Voltage Reference in SOT23

Switching Voltage Regulators Tiny 300nA nanoPower Buck converters in uDFN and WLP pacakges

IC ADC 24BIT SIGMA-DELTA 10DFN

MAXIM INTEGRATED PRODUCTS - MAX38642AENT+ - DC/DC Buck (Step Down) Regulator, Adjustable, 1.8V to 5.5V In, 700mV to 3.3V/700mA Out, WLP-6

Switching Voltage Regulators Tiny 300nA nanoPower Buck converters in uDFN and WLP packages

IC LED DRIVER RGLTR DIM TSOT23-6

Switching Voltage Regulators Tiny 300nA nanoPower Buck converters in uDFN and WLP packages

LTC6652BHMS8-2.048#PBF is a precision 2.048 V automotive-grade voltage reference from Analog Devices delivering up to 5 mA output current with tight output accuracy between 2.045952 V and 2.050048 V in an 8-pin MSOP package. It targets ADC/DAC reference, precision measurement, and automotive sensor calibration applications.

Analog Devices LTC3621EMS8E#PBF is a 1A synchronous step-down (buck) switching regulator with 2.7V to 17V input range and adjustable output starting at 0.6V minimum. It uses current-mode control with pulse-skip mode for high efficiency at light loads in an 8-pin MSOP exposed-pad package. Available from stock with worldwide shipping.

IC OPTOCOUPLER GATE DRVR SOT23-6

LT3976IMSE#PBF is a 42 V input, 5 A step-down switching regulator from Analog Devices with 2 MHz switching frequency and an ultra-low 3.4 µA quiescent current for always-on systems. It supports 4.3 V to 40 V input range with current-mode PWM control in a 16-lead MSOP-E package. Available in stock with worldwide shipping.

Analog Devices LT3976IUDD#PBF is a 42 V, 5 A synchronous step-down switching regulator operating at up to 2 MHz with ultra-low 3.4 µA quiescent current for battery-powered applications. Current-mode PWM control with 4.3 V to 40 V input range delivers high efficiency in a compact 24-pin QFN package. Available from stock worldwide with competitive pricing.

Precision Amplifiers 2x uP Zero-Drift Op Amps

Switching Voltage Regulators 4 to 20mA loop buck regulator

Analog Devices LTC4312IDE#PBF is a 2-channel automotive-grade I2C bus buffer in a 14-pin DFN EP package, enabling hot-swap bus isolation and capacitance buffering up to 400 kHz Fast Mode. Supports 2.7 V to 5.5 V supply and -40°C to 125°C AEC-Q100 operation. Available from stock with worldwide shipping.

Analog Devices MAX4805ACTJ+T is an octal (8-channel) general-purpose voltage-feedback op-amp with 44 MHz bandwidth and 2.264 µA maximum bias current in a compact 32-pin TQFN package. It integrates 8 independent amplifier circuits for multichannel signal conditioning. Available in tape and reel with worldwide shipping.

0.300 INCH, LEAD FREE, PLASTIC, DIP-8

The HMC349AMS8GTR is a GaAs SPDT RF switch operating from 100 MHz to 4 GHz with high isolation and nonreflective design. It features CMOS-compatible control, 50 Ω impedance, and up to 33.5 dBm input power handling. Ideal for test equipment, wireless infrastructure, and military communications.

MAXM86161EFD+ is a single-supply integrated optical module from Analog Devices designed for heart rate (HR) and SpO2 measurement. It integrates a 14-LGA optical module with 1 channel and supports continuous biometric monitoring. Ideal for wearable health devices, fitness trackers, and medical grade pulse oximetry systems.

Selectable 1× or 2× interpolation filter Support input signal bandwidth up to 575 MHz Very small inherent latency variation: <2 DAC clock cycles Proprietary low spurious and distortion design 6-carrier GSM ACLR = 79 dBc at 200 MHz IF SFDR >85 dBc (bandwidth = 300 MHz) at zero IF Flexible 16-bit LVDS interface Supports word and byte load Multiple chip synchronization Fixed latency and data generator latency compensation FIFO eases system timing and includes error detection High performance, low no

Analog Devices MAX16128UAACAC+ is a single-channel automotive-grade load-dump and reverse-voltage protection controller in a compact 8-pin TSSOP package, designed to protect downstream electronics from transients and fault conditions on 12 V automotive supply rails. It controls an external P-channel MOSFET to clamp load-dump pulses up to 40 V and block reverse polarity events, preventing damage to sensitive ICs. Available with worldwide shipping from stock.

Digital to Analog Converters - DAC 8-Bit 2Ch Precision DAC

LTM4637IY#PBF is a µModule DC/DC step-down regulator from Analog Devices featuring adjustable output voltage from 0.6 V to 5.5 V, input voltage range of 4.5 V to 20 V, and current-mode PWM control. The device integrates inductors, MOSFETs, and control circuitry in a compact BGA package for high-density power designs. Available through authorized distributors with worldwide shipping.

The LT6658AIMSE-2.5#PBF is a precision 2.5 V automotive-grade voltage reference from Analog Devices capable of sourcing and sinking up to 150 mA in a 16-pin MSOP with exposed pad. It delivers dual buffered outputs with tight ±500 µV initial accuracy for demanding ADC, DAC, and precision measurement applications. Available from stock worldwide.

The LTC2600IUFD#PBF by Analog Devices is an octal 16-bit rail-to-rail DAC housed in a 20-lead QFN package. It communicates via a serial interface using binary input format with a maximum linearity error of 0.0977%, delivering precision analog outputs for industrial control and instrumentation applications. Available with lead-free (PBF) construction for RoHS compliance.

5.5V Input, 1.8A/3.1A Switch Buck-Boost Converter with 6μA IQ

5.5V Input, 1.8A/3.1A Switch Buck-Boost Converter with 6μA IQ

Quad Current-Sense Amplifier with Overcurrent Threshold Comparators

Analog Devices MAX1193ETI+T is a dual-channel 8-bit flash ADC sampling at up to 45 Msps from a 3.6 V supply, with ±0.512 V differential analog input range in a 28-pin LFCSP package. Its parallel output interface and low linearity error of 0.39% enable high-speed signal digitization for imaging and communications applications. Available from authorized distributors with worldwide shipping.

Analog Devices LTC3300IUK-2#PBF is an addressable high-efficiency bidirectional multicell battery balancer IC designed for Li-ion and LiFePO4 battery stack management with adjustable balancing thresholds. It supports daisy-chain addressing for scalable multi-IC battery management systems in a 48-pin QFN package. Available with worldwide shipping for EV, energy storage, and portable power applications.

PLASTIC, DIP-16

Supervisory Circuits Single uPower Reset Circuit

Digital Isolators Four Channel, Low Power, High Speed, Digital Isolator

LTC2625CGN#PBF is an octal 12-bit I2C voltage-output DAC with a maximum analog output of 5.5V and less than 0.1% linearity error in a 16-pin SOIC package. It uses a serial binary input format, enabling easy multi-channel voltage control from a 2-wire I2C bus. Available from stock with worldwide shipping.

The Analog Devices LTC3220IPF#PBF is a universal multi-output LED driver delivering up to 360 mA total output current with serial interface control and 18 output channels. It operates from a single supply and uses a 28-pin QFN package for compact PCB integration. Available globally in lead-free (PBF) packaging for RoHS-compliant designs.

Analog Devices LT1786FCS#TRPBF is a CCFL voltage regulator IC with current-mode PWM control, supporting input voltages from 4.5 V to 30 V in a 16-pin SOIC package. Delivers precise fluorescent lamp brightness control with single-output regulation. Available from global distributors with worldwide shipping.

The LTM4611IV#PBF is a complete 15A DC/DC step-down µModule regulator operating from 1.5V to 5.5V input with adjustable output voltage from 0.8V to 5V in a compact 133-ball LGA package. It integrates a current-mode PWM controller, power switches, inductor, and passive components for minimal external BOM. Available with worldwide shipping.

Analog Devices LT1009S8#TRPBF is a precision 2.5 V two-terminal voltage reference in an 8-pin SOIC package with adjustable output up to ±5%. Delivers high accuracy with low temperature coefficient suitable for data converters and precision analog circuits. Available in RoHS-compliant tape-and-reel format with worldwide stock and fast shipping.

400mV to 5.5V Input, nanoPower Synchronous Boost Converter with True Shutdown

LT8580EMS8E#TRPBF is an Analog Devices automotive-grade current-mode PWM boost DC-DC converter accepting 2.55 V to 40 V input and stepping up to 65 V output, housed in a thermally enhanced 8-pin MSOP-EP package for compact high-voltage designs. Available in tape-and-reel with worldwide shipping.