Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 40,901–40,950 of 77,666
The TMS320C28346ZFEQ is an automotive-grade C2000 32-bit DSP microcontroller from Texas Instruments offering 300 MIPS performance with FPU, 516 KB RAM, and EMIF interface. It operates at 3.3 V with 22-bit address bus and BGA package for advanced embedded control systems.
Texas Instruments TLV9004QPWRQ1 is an automotive-qualified quad operational amplifier with 1 MHz bandwidth, rail-to-rail input/output, and 1.8V to 5.5V supply range. Features 63 dB minimum CMRR and 1600 µV maximum offset voltage in a 14-pin SOIC package. Available from stock with worldwide shipping.
The TLV7031QDBVRQ1 is an automotive-grade push-pull output comparator in a compact SOT-23-5 package, offering rail-to-rail input range with ultra-low input bias current of 2 nA and 8 mV max offset voltage. AEC-Q100 qualified for demanding automotive environments.
The TLVH431QDCKT is an automotive-grade adjustable precision shunt voltage regulator with an output voltage range of 1.24 V to 18 V and a maximum output current of 80 mA. It operates in a compact 6-pin SOT-23 package. Available from stock worldwide with fast shipping.
TMP1075NDRLR is a 12-bit digital temperature sensor from Texas Instruments with ±1°C accuracy over the -40°C to +125°C range. It communicates via I2C/SMBus interface, supports 4-address selection, and operates from a 1.7 V to 3.6 V supply. Available in a compact SOT-5X3 package for space-constrained designs.
Texas Instruments DRV10987SPWP is a sensorless sinusoidal 3-phase BLDC motor driver supporting 12 V to 24 V and 3.5 A peak current. From $2.80, in stock, worldwide shipping.
TMAG5170A2QDGKR is a 3-axis linear Hall-effect sensor IC from Texas Instruments with a 4-wire SPI interface and 12-bit resolution. Features 4 mT to 100 mT range, -40°C to 125°C operation. From $2.50, in stock, worldwide shipping.
TAS5152DKD is a Class-D audio amplifier IC delivering up to 125 W stereo or 240 W mono output power with PWM input and 0 V to 37 V supply range. It integrates dual-channel amplification in a 36-pin PDSO package with 10% THD rating. Available from authorized distributors with worldwide shipping.
Texas Instruments TLIN1039DDFRQ1 is an automotive-grade single-channel LIN transceiver supporting up to 20 Mbps data rate in an 8-pin SOT-23 package. It meets AEC-Q100 qualification requirements and provides enhanced ESD protection on LIN and VSUP pins for robust in-vehicle network connectivity.
TLV7103318DSER is a fixed 1.8 V LDO linear voltage regulator from Texas Instruments. Features 200 mV max dropout voltage, 2 V to 5.5 V input range, and 6-pin SOT-23 package. Available from stock worldwide with competitive pricing.
TLV9032DGKR is a dual push-pull output comparator from Texas Instruments in an MSOP-8 package, offering 1500 µV max input offset voltage and 5 nA bias current. Ideal for precision signal detection in battery-powered systems. Available from stock with worldwide shipping.
TLV9042IDGKR is a dual general-purpose op-amp from Texas Instruments with 75 dB CMRR, 12 pA max bias current, and rail-to-rail output. From $0.45 in stock with worldwide shipping.
The TLV2322IPW is a dual operational amplifier from Texas Instruments featuring 94 dB typical CMRR and ultra-low 0.0002 µA bias current. It offers voltage-feedback architecture with frequency compensation in an TSSOP package for compact designs. Available in stock with worldwide shipping.
Texas Instruments TCAN1044AEVDRQ1 is an automotive-grade CAN FD transceiver supporting data rates up to 8 Mbps in a compact SOIC-8 package, AEC-Q100 qualified. Available from authorized distributors with worldwide shipping.
The TLV3601DCKT is a 2.5 ns high-speed rail-to-rail input comparator with push-pull output, a 5 µA maximum input bias current, and a 5 mV input offset voltage, operating over -40 °C to +125 °C. It is housed in a tiny 5-pin SC70 package for space-critical designs. Available from stock worldwide with fast shipping.
TLV3601QDCKRQ1 is an AEC-Q100 automotive high-speed rail-to-rail comparator by Texas Instruments with 2.5 ns propagation delay. Key specs: push-pull output, 5 µA input bias current, 5-pin SC70 package rated -40 °C to +125 °C. From $0.85, in stock with worldwide shipping.
Texas Instruments TLE2064BMJB is a military-grade quad JFET-input op-amp in ceramic DIP-14 package with 36 V supply, 2 MHz bandwidth, 500 µV offset voltage, and 90 dB CMRR. Features input common-mode range to V+. Available from stock worldwide.
Texas Instruments LM20143QMHE/NOPB is an AEC-Q100 automotive-grade 3A synchronous buck regulator in 16-HTSSOP, supporting 2.95 V to 5.5 V input and 0.8 V to 3.3 V adjustable output. Operates from -40°C to 125°C. Available from stock worldwide.
The TCAN1057AVDDFRQ1 is an AEC-Q100 qualified automotive CAN transceiver with silent mode and 1.8 V I/O support in an 8-pin SOT-23 package. It supports data rates up to 8 Mbps and features ±8 kV ESD protection on CANH and CANL. Available from stock with worldwide shipping.
General Purpose Audio Codec 2ADC / 2DAC Ch 32-Pin VQFN EP T/R
The TCAN1057AVDRQ1 is an automotive-grade CAN FD transceiver in an 8-pin SOIC package, supporting data rates up to 8 Mbps and meeting AEC-Q100 reliability requirements for in-vehicle networks. Ideal for ADAS, body control, and powertrain CAN bus nodes with worldwide distribution.
SN65C3223PW
TL2218-285PWR is a current-mode SCSI bus terminator IC by Texas Instruments providing active termination for 9 SCSI signal lines. Key specs: 2.85 V regulated termination voltage, 9 terminated signal lines, and a 20-pin TSSOP package with 0.25 mm pitch. Available from stock with worldwide shipping.
TCAN1051HGDRBR is an automotive-grade CAN FD transceiver from Texas Instruments supporting up to 5 Mbps data rate with 70 V bus-fault protection and sleep mode. It meets AEC-Q100 Grade 1 qualification for harsh vehicle environments. Available in a SON package with worldwide stock and fast shipping.
Texas Instruments TLC555IP-P2 is a CMOS LinCMOS timer IC with up to 1.2 MHz maximum output frequency, low supply current, and rail-to-rail output swing, housed in an 8-pin PDIP package. Available in stock worldwide with competitive pricing.
The THVD1439DR is a robust RS-485 line transceiver operating from 3 V to 5.5 V supply, featuring 4 kV surge protection and 1.8 V VIO compatibility for low-voltage logic interfaces. It is available in an 8-pin SOIC package with worldwide distribution and fast shipping.
MSP430 series Microcontroller IC 16-Bit 8MHz 8KB (8K x 8 + 256B) FLASH 32-VQFN (5x5)
Multiplexer 4 x 1:1 16-SOIC
Texas Instruments THS4211DGN is an ultra-low-distortion voltage-feedback operational amplifier with 35 MHz bandwidth, 56 dB CMRR, and shutdown capability in a small outline package, suited for precision high-speed signal processing. Available from stock with worldwide shipping.
TAS5176DDW is a 100 W 5.1-channel Class-D audio amplifier from Texas Instruments with PWM input, supporting 0 V to 34 V supply and 6 output channels with 105 dB SNR. It drives full surround-sound systems with high efficiency. Available from stock with worldwide shipping.
THVD1439VDR is a high-speed RS-485 line transceiver IC by Texas Instruments. Key specs: 40 Mbps data rate, operates from 3.3 V to 5 V supply, EIA/TIA-485-A compliant, differential Schmitt trigger inputs, SOIC-8 package. From $0.90 in stock, worldwide shipping.
Quadruple Differential Line Receiver
DP83848LFQSQ is a 0040A 100000000Mb integrated circuit by Texas Instruments. Key specs: 0040A, 100000000Mb, 40 pins. From quote-based pricing, in stock with worldwide shipping for production sourcing.
Texas Instruments SN74LVC3G34DCTR-P is a triple non-inverting CMOS buffer with three independent channels operating from 1.65 V to 5.5 V at up to 100 MHz propagation speeds. Each buffer drives 32 mA output current for signal fanout and line driving in mixed-voltage systems. Available from stock worldwide in a SSOP-8 package.
TCAN1044AVDRQ1 is an automotive-qualified CAN bus transceiver from Texas Instruments, supporting data rates up to 8 Mbps for CAN FD networks with a single transceiver channel in an 8-pin SOIC package. It meets AEC-Q100 Grade 1 qualification for harsh automotive environments and operates across a wide supply range. Available from stock globally with competitive pricing.
The TCAN1044ADRQ1 is an AEC-Q100-qualified automotive CAN transceiver with standby mode, supporting data rates up to 8 Mbps and featuring IEC 61000-4-2 Level 4 ESD protection on CANH and CANL pins. It is housed in an 8-pin SOIC package for compact automotive PCB designs. Available from stock worldwide with fast shipping.
TCAN1044AVDDFRQ1 is an AEC-Q100 automotive CAN transceiver by Texas Instruments with 1.8 V I/O support and standby mode. Key specs: 8 Mbps CAN FD data rate, ±8 kV ESD protection on bus pins, 8-pin SOT-23 package. From $0.95, in stock with worldwide shipping.
TB5D2HDR is a 4-bit differential line driver IC by Texas Instruments for general-purpose interface applications. Key specs include 4 differential output channels, 16-pin SOIC package, and standard input compatibility. Available from stock with worldwide shipping.
Texas Instruments TAS5414ATDKDRQ1 is an automotive-qualified 4-channel Class D audio amplifier delivering 116 W total output power with 32 dB gain, in a 36-pin HSSOP package. Meets AEC-Q100 qualification for in-vehicle infotainment and rear-seat entertainment systems. Available worldwide with in-stock inventory.
D-Type Transparent Latch 1 Channel 8:8 IC Tri-State 20-SOIC
2.7-Gbps DP++ 1.1a 1-to-2 mux
RS-232 Interface IC
Low jitter, dual 1:8 universal-to-LVDS buffer
SN75160BN-NG is a fast IEEE-488 GPIB bus transceiver IC with propagation times up to 22ns max, housed in a DIP package. Provides 8-channel bidirectional interface for instrument bus communication. Available from stock with worldwide shipping.
3.3-V ABT Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs
Texas Instruments JM38510/31004BCA is a military-grade 4-channel, 2-input bipolar AND gate IC operating from 4.5 V to 5.5 V supply, housed in a 14-lead ceramic DIP package rated for -55°C to 125°C. Compliant with MIL-STD screening for high-reliability aerospace and defense applications.
SN74F112N is a dual JK negative-edge-triggered flip-flop IC from Texas Instruments in the Fast (F) logic family, operating from 0°C to 70°C. It features individual J, K, clock, set, and clear inputs per flip-flop with 5 V TTL-compatible operation in a 16-pin DIP package. Available from stock worldwide for legacy digital design and sequential logic applications.
Flip Flop 1 Element D-Type 10 Bit Positive Edge 24-TSSOP (0.173", 4.40mm Width)
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 56-BGA Microstar Junior (7x4.5)
Transceiver, Non-Inverting 1 Element 8 Bit per Element 3-State Output 24-TSSOP
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote