Integrated Circuit

High Speed Operational Amplifiers 650MHz unity gain stable JFET inp Amp

Current Sense Amplifiers 40-V dual-channel bidirectional ultra

Board Mount Hall Effect / Magnetic Sensors Digital-Switch Hall Effect Sensor

Supervisory Circuits Precision window supervisor for OV & UV monitoring with window watchdog timer & programmable delay 10-VSON -40 to 125

The TPS3899DL30DSER is a single-channel voltage supervisor with open-drain reset output and programmable reset delay in a 6-pin WSON (1.5×1.5 mm) package by Texas Instruments. Key specs: 3.0 V monitoring threshold, manual reset input, 1-channel supervision. Available from stock with worldwide shipping.

Switching Voltage Regulators Dual 3-A USB Type-C charging ports controller with programmable current limit and thermal management 25-VQFN-HR -40 to 125

uSiP-14

Board Mount Current Sensors Automotive, precisio n isolated current

Analog to Digital Converters - ADC 16-bit, 2.048-MSPS, dual-channel, simultaneous-sampling SAR ADC with enhanced SPI 32-VQFN -40 to 125

Switching Voltage Regulators Automotive 2.75-V to 6-V, 1-A step-down converter in a 2mm x 3mm wettable-flanks QFN package//

Inverter IC 1 Channel 6-SON (1.45x1) IC INVERTER 1CH 1-INP 6SON

Texas Instruments TPS1HC100B-Q1 is an AEC-Q100 automotive smart high-side switch with 100 mΩ on-resistance and 2.5 A continuous load current in a small-outline package. It integrates overcurrent, overtemperature, and open-load protection with a diagnostic output. Designed for 12 V automotive body-control and industrial load-switching applications.

Texas Instruments LMX2581ESQX/NOPB is a wideband frequency synthesizer with integrated VCO covering up to 3800 MHz, featuring a PLL and clean clock output in a 32-pin WQFN package rated from -40 to 85°C. From $12.50 in stock worldwide shipping.

TPS2013DR is a single-channel N-channel power distribution switch from Texas Instruments rated for 1.5 A continuous current and 2.7 V to 5.5 V input voltage in an 8-pin SOIC package. It provides overcurrent protection and controlled power switching for USB and load-management applications. Available from stock with worldwide shipping.

Board Mount Hall Effect / Magnetic Sensors Low power (5 Hz, <1 uA), low voltage (up to 5.5V) switch 3-TO-92 -40 to 85

The TLVH431AIDCKT is a precision adjustable shunt voltage reference from Texas Instruments with an output range of 1.24 V to 18 V and up to 80 mA cathode current. It offers tight initial accuracy in a tiny SOT-23-6 (6-pin) RoHS e4 package. Available in tape-and-reel for high-volume automated assembly.

TPA6102A2DGK is a stereo Class AB headphone amplifier IC in an 8-pin VSSOP package. Provides 36 dB gain, 20 kHz bandwidth, and 0.1% THD for clear audio output. From $0.80 in stock worldwide shipping.

Board Mount Hall Effect / Magnetic Sensors Low power (5 Hz, <1uA), low voltage (up to 5.5V) switch 3-TO-92 -40 to 85

Board Mount Hall Effect / Magnetic Sensors Low power (5 Hz, <1 uA), low voltage (up to 5.5V) switch 3-TO-92 -40 to 85

TPS628680ARQYR is a 4 A synchronous step-down DC-DC converter from Texas Instruments with a 2.4 V to 5.5 V input range and I2C programmable output. It integrates current-mode PWM control for fast transient response in a tiny 1.5 mm x 2.5 mm QFN-9 package. Ideal for space-critical portable and wearable power rails.

TMUX6209RUMR is a dual two-channel 4:1 analog multiplexer with 36V operation, low on-resistance, and 52 MHz bandwidth supporting 1.8V logic control. It handles input signals from -4.5V to 18V for flexible signal routing in precision measurement systems. Available in a 16-pin QFN package for compact mixed-signal PCB designs.

TUSB320RWBR is a USB Type-C configuration channel logic and port control IC from Texas Instruments, supporting USB 2.0 and USB 3.1 data roles in a 12-pin X2QFN package. It manages CC pin detection, DRP/UFP/DFP role selection, and communicates over I2C for host control. Available from stock worldwide with fast shipping.

LDO Voltage Regulators 3-A, low-dropout voltage regulator with power good & enable 5-DDPAK/TO-263 -40 to 125

TM4C1233C3PMIR is a 32-bit ARM Cortex-M4F microcontroller from Texas Instruments running at up to 80 MHz with 32 KB Flash and integrated ADC and DMA channels. It is housed in a 64-pin LQFP 10x10 mm package with boundary scan support for easy production testing. Available from stock with worldwide shipping.

TM4C1236E6PMI7R is a 32-bit ARM Cortex-M4F microcontroller by Texas Instruments running at up to 80 MHz with 128 KB flash memory. Key specs: hardware floating-point unit, integrated ADC, DMA, and JTAG boundary scan in a 64-pin LQFP 10x10 mm package. Available in stock with worldwide shipping.

Texas Instruments 5962-9957701NXD is an integrated circuit for electronic assemblies. It is specified around 32 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

Enhanced Automotive dual CAN transceiver with Standby

UCC3809PTR-1 is a current-mode PWM switching controller by Texas Instruments designed for offline and DC-DC power supplies. Key specs: 10 V to 19 V input range, programmable oscillator up to 1 MHz, and low 1 mA startup current. Available from stock worldwide with fast shipping.

Switching Controllers Automotive ultra low standby, flyback controller with integrated HV startup and optocoupler feedback 7-SOIC -40 to 125

UCC2807PWTR-3 is a current-mode PWM switching controller by Texas Instruments with a 4.3 V to 12 V operating range. Key specs: 14-pin SOIC package, pulse-width modulation with cycle-by-cycle current limiting, and internal gate drive output. Available from stock worldwide with competitive pricing for power supply designs.

D-Type, Addressable 1 Channel 1:8 IC Standard 16-SOIC

Gate Drivers Reinforced isolation dual-channel gate driver with 3.3-mm channel-to-channel spacing option 14-SOIC -40 to 125

8-ch, 1.65-V to 3.6-V inverters with 3-state outputs

UC3706DW is a dual-channel push-pull MOSFET gate driver IC by Texas Instruments. Key specs: 2 channels, totem-pole outputs, 16-pin SOIC package. From stock with worldwide shipping.

The SN74LV8153PWR-P is a serial-to-parallel interface IC by Texas Instruments in a small outline package operating from 1.65 V to 5.5 V. Key specs: 8-bit parallel output, SPI-compatible serial input, and 24 mA output drive capability. Available from stock worldwide with same-day shipping for digital interface designs.

SN75157P-P2 is a dual differential line receiver from Texas Instruments in a 14-pin DIP package, compliant with RS-422 and RS-485 standards. It features a wide common-mode input range and high-speed data reception up to 10 Mbps for balanced transmission lines. Available from stock worldwide with fast shipping.

UC28023DW is a PWM switching controller by Texas Instruments supporting current-mode and voltage-mode control with a 9 V to 12 V input voltage range. Key specs: 15 V nominal input, 16-pin SOIC package, configurable peak or average current mode. From $1.20, in stock with worldwide shipping.

UC28025DWR is a current/voltage-mode PWM switching controller by Texas Instruments with configurable peak or average current mode. Key specs: 9 V to 15 V input, 16-pin SOIC package, supports peak and average current control. From stock with worldwide shipping.

Texas Instruments SN74LV541APWR-P is an octal buffer and line driver with 3-state outputs operating from 2 V to 5.5 V supply. Supports 8 channels with propagation delay under 7 ns and 24 mA drive capability. Available in TSSOP-20 package with worldwide distribution.

SN74LS47NS

Translation - Voltage Levels Four channel unidirectional level shifter 12-X2QFN -40 to 125

Analog Switch ICs 0.65-Ohm Dual SPDT A na Switch

Use the download button to access the TPS259461ARPWR schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators 4.2-V to 60-V input, 1-V to 6-V output, 0.6-A step-down module in 5-mm x 5.5-mm x 4-mm QFN

Counter ICs 4-Bit Synch Binary

Single-channel input fault protection controller safeguarding systems from overvoltage and reverse-polarity events. Operates across 2.7 V to 23 V input range with adjustable threshold in a compact 10-pin QFN package. Available from authorized distributors with worldwide shipping.

5962-7704301VCA is a Texas Instruments operational amplifier IC for signal conditioning and data acquisition. It combines 14 pins, DIP, -55°C to 125°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

The TPSM5601R5SRDAR is a 4.2 V to 60 V input, 1.5 A current-mode PWM synchronous step-down power module integrating inductor and FETs in a 15-pin SiP package. It provides high-voltage point-of-load regulation for industrial and 24 V bus applications.

TLK10081CTR is a 10-Gbps 1-to-8 channel multi-rate redundant link aggregator IC by Texas Instruments in a 144-pin BGA package. Key specs: up to 10,000,000 Mbps data rate, 8 channels, 260°C peak reflow compatible. From competitive pricing, in stock with worldwide shipping.

Switching Voltage Regulators 4.2-V to 60-V input, 1-V to 16-V output, 0.6-A step-down module in 5-mm x 5.5-mm x 4-mm QFN