TB5D2HDR Texas Instruments Integrated Circuit (Small Outline Packages) In Stock
TB5D2HDR is a 4-bit differential line driver IC by Texas Instruments for general-purpose interface applications. Key specs include 4 differential output channels, 16-pin SOIC package, and standard input compatibility. Available from stock with worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- Small Outline Packages
- Pin Count
- 16
- Lifecycle
- ACTIVE
- Datasheet
- TB5D2HDR Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $11.8072(MOQ 2500)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 4-bit differential output architecture rejects common-mode noise on long cable runs for robust data transmission
- Standard input compatibility accepts CMOS and TTL logic levels without level-shifting in mixed-voltage systems
- 16-pin SOIC package with Pb-free construction meets RoHS compliance requirements for global market deployment
Applications
TB5D2HDR is used for driving differential signal lines in industrial data communication, motion control encoder interfaces, and backplane interconnects where noise immunity over cable lengths exceeding 1 m is required. Its 4-channel architecture enables simultaneous transmission of multiple parallel data lines with consistent skew matching across all channels. The device is also applicable in test and measurement equipment signal distribution where balanced differential signaling reduces electromagnetic interference.
Specifications
| Pbfree Code | Yes |
| YTEOL | 15 |
| Differential Output | YES |
| Driver Number of Bits | 4 |
| High Level Input Current-Max | 20A |
| Input Characteristics | STANDARD |
| Interface IC Type | LINE DRIVER |
| Interface Standard | GENERAL PURPOSE |
| JESD-30 Code | R-PDSO-G16 |
| JESD-609 Code | e4 |
| Number of Functions | 4 |
| Out Swing-Min | 0.7V |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP16,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Peak Reflow Temperature (Cel) | 250 |
| Qualification Status | Not Qualified |
| Supply Current-Max | 40mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 4.5V |
| Supply Voltage-Nom | 5V |
| Surface Mount | YES |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Transmit Delay-Max | 2ns |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 2 |
| ECCN | 5A991.B.1 |
| HTS Code | 8542.39.00.90 |
| Country of Origin | Taiwan |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many differential output channels does TB5D2HDR provide, and how does this affect system wiring?
TB5D2HDR integrates 4 differential output channels in a 16-pin SOIC package, replacing up to 4 discrete differential driver circuits and reducing board area by approximately 60% compared to single-channel solutions. Each channel drives a balanced pair, so a 4-axis encoder interface requires only 1 TB5D2HDR device instead of 4 separate ICs.
What input logic standards are compatible with TB5D2HDR, and does it require level shifting from a 3.3 V microcontroller?
TB5D2HDR accepts standard CMOS and TTL input levels, so a 3.3 V microcontroller with sufficient drive current can interface directly without an external level-shifter in most cases. Input high current is specified at 20 µA maximum, meaning the MCU GPIO must only source a few microamperes to guarantee a valid logic-high input.
For a 10-meter industrial RS-422 cable, how does TB5D2HDR's differential output help maintain signal integrity?
Differential signaling from TB5D2HDR rejects common-mode noise induced by motors and switching regulators along 10-meter cable runs, because the receiver responds only to the voltage difference between the 2 wires rather than absolute levels. Over 10 m of twisted-pair at typical RS-422 data rates up to 10 Mbps, differential rejection improves noise margin by more than 20 dB versus single-ended alternatives.
Related Guides
How to Choose a 3528 SMD Indicator LED for Blue Status Lighting: Selection Guide
A practical 3528 SMD indicator LED selection guide using 150141BS73100 and related Wurth 150141 variants for blue status lighting.
Jul 5, 2026
BAS70KFILM Design Guide for Low-Leakage Signal Clamping and RF Detector Inputs
Practical BAS70KFILM design guidance for signal clamps, RF detector inputs, leakage control, capacitance, layout, and sourcing alternatives.
Jul 5, 2026
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 2500+ | $11.8072 | $29517.95 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”