Integrated Circuit

Linear Voltage Regulators volt Regulator, Quad, hi Current QUAD LOW NOISE HIGH PSRR LINEAR VOLTAGE REGULATOR

LTC6405IMS8E#TRPBF is a 2.7 GHz unity-gain bandwidth, low-noise, rail-to-rail input differential amplifier and ADC driver operating from a 5 V supply with 750 MHz -3 dB bandwidth. It delivers 75 dB typical CMRR and is packaged in a compact MS8E footprint for high-speed signal chain applications.

Operational Amplifiers - Op Amps Dual uP R-to-R I/O OA

LTC2954CTS8-1#TRMPBF is a push-button on/off controller with interrupt output from Analog Devices, designed to manage system power sequencing and menu-driven user interfaces in a compact 8-pin SOT-23 package. It features adjustable thresholds, supports supply voltages from 1.6 V to 26 V, and operates over -40°C to 85°C. Available from stock worldwide shipping.

The LTC2050HVCS6#TRMPBF is a zero-drift, rail-to-rail output operational amplifier in a compact SOT-23-6 package. It offers 130 dB CMRR and near-zero offset voltage drift using chopper stabilization. Available from stock worldwide with fast shipping.

The LTC2050HVIS8#PBF is a zero-drift, chopper-stabilized operational amplifier from Analog Devices in an 8-pin SOIC package. It delivers 115 dB CMRR, rail-to-rail output, and 3 MHz bandwidth from a 2.7V supply. Available from stock worldwide with fast shipping.

Analog Devices LTC6101HVCIS5#TRMPBF is a high-voltage current sense amplifier in a 5-pin SOT-23 package capable of operating with input voltages up to 60 V. It delivers a maximum input offset voltage of 1200 µV and supports accurate high-side current measurement. Available from stock with worldwide shipping.

The LTC2944CDD#PBF is a battery gas gauge IC from Analog Devices supporting up to 60 V battery stacks with integrated voltage, current, and temperature measurement. It provides adjustable threshold alerts via an I2C-compatible interface in a compact 8-pin DFN package. Ideal for battery management systems in industrial equipment, portable instruments, and electric vehicle auxiliary packs.

Analog Devices LTC4367CMS8-1#PBF is a 100 V overvoltage, undervoltage, and reverse supply protection controller in an 8-pin MSOP package. It monitors supply rails and drives an external N-channel MOSFET to disconnect the load within 0.5 ms on fault detection. RoHS-compliant and available from stock with worldwide shipping.

Controller 2.7V to 26.4V Automotive 8-Pin DFN EP T/R

The LT4320HN8-1#PBF is an ideal diode bridge controller IC from Analog Devices supporting 9 V to 72 V input range. It drives four external N-channel MOSFETs to form a near-lossless full-wave bridge rectifier, replacing lossy Schottky diode bridges. Packaged in an 8-pin DIP.

The LT1720CMS8#PBF is a dual ultra-fast rail-to-rail output comparator from Analog Devices with 2.5 ns propagation delay and 2.7 V to 6 V supply range in an 8-pin MSOP package. It features push-pull outputs compatible with TTL and CMOS logic levels for high-speed signal detection. Available from authorized distributors with worldwide shipping.

Analog Devices LT1800CS8#PBF is an 80 MHz rail-to-rail input/output precision operational amplifier in an 8-pin SOIC package, featuring 1.75 µA maximum bias current and 82 dB minimum CMRR. Ideal for precision signal conditioning and active filter designs. Available from distributor stock with worldwide shipping.

Analog Devices LTC6262IMS8#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 8 pins, 2.625 V, 5.25 V in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Linear Voltage Regulators 150mA LDO 2.7Vout w/ QOD

LDO Voltage Regulators 3.3/5Vin 1.2A Ultra Low Noise LDO Fixed

Analog Devices LTC6244HVHDD#PBF is a dual precision 50 MHz CMOS operational amplifier with 80 dB minimum CMRR and 2 pA maximum input bias current. Housed in a small-outline no-lead (DFN) package, it delivers low-noise, high-speed performance for precision signal-conditioning circuits.

Analog Devices LTC1662CMS8#TRPBF is an ultra-low power dual 10-bit DAC with serial input in an 8-pin MSOP package, supporting up to 5.5 V supply, offering 0.39% linearity error for precision analog output.

Linear Voltage Regulators Ultra Low Quiescent Crnt 150mA CMOS

LTC4367IMS8-1#PBF is a 100 V overvoltage, undervoltage, and reverse supply protection controller with adjustable thresholds and 0.5 ms turn-on delay in an SOIC-8 package. It guards sensitive downstream electronics against input supply faults across a wide voltage range. Available from Analog Devices with worldwide distribution and in-stock supply.

The Analog Devices LTC2917HMS-A1#PBF is a single-channel voltage supervisor IC with 27 selectable threshold presets and an integrated watchdog timer in a 10-pin MSOP package. It monitors one supply rail and asserts a reset signal when voltage falls below the selected threshold, ensuring reliable system startup and fault recovery. Available in stock with worldwide shipping.

Analog Devices LT1720IMS8#PBF is a dual high-speed comparator operating from 3 V or 5 V single supply with 4.5 ns propagation delay and push-pull outputs. Features 4.5 mV maximum input offset voltage in a compact MSOP-8 package. In stock worldwide with fast shipping.

RS-232 Interface IC 1.8V-5V 1D+1R 250kbps RS232 Transceiver

Multiplexer Switch ICs SPI Low chrg injctm leakage Diff

LTC4367HMS8#PBF is a 100V overvoltage, undervoltage, and reverse supply protection controller IC from Analog Devices in an 8-pin MSOP package, featuring adjustable thresholds and a 32 ms turn-on delay. It controls an external N-channel MOSFET to disconnect the load during fault conditions, protecting sensitive downstream electronics. Available from authorized distributors worldwide.

32-Channel 20mA LED Driver with Buck Controller UHH PACKAGE 56-LEAD (5mm × 9mm) PLASTIC QFN

The LTC6262HMS8#TRPBF is a dual 30 MHz rail-to-rail input/output operational amplifier from Analog Devices, consuming only 240 µA quiescent current per amplifier. It features 70 dB minimum CMRR and 0.15 µA maximum bias current, making it ideal for precision, power-efficient analog front ends. Available in an 8-lead MSOP package with tape-and-reel packaging for high-volume automated assembly.

Analog Devices LT6106CS5#TRPBF is a precision high-side current sense amplifier operating up to 36V supply, featuring 350µV maximum input offset voltage and 0.2MHz bandwidth in a compact SOT-23-5 package for accurate current monitoring.

► Ultralow noise: 9 µV rms, independent of VOUT ► No additional noise bypass capacitor required ► Stable with 1 µF ceramic input and output capacitors ► Maximum output current: 150 mA ► Input voltage range: 2.2 V to 5.5 V ► Low quiescent current ► IGND = 10 µA with zero load ► Low shutdown current: <1 µA ► Low dropout voltage: 105 mV at 150 mA load ► Initial output voltage accuracy: ±1% ► Up to 14 fixed output voltage options: 1.8 V to 3.3 V ► PSRR performance of 70 dB at 10 kHz ► Current limit

Analog Devices LTC6241HS8#PBF is a dual precision 18 MHz CMOS operational amplifier with low input bias current of 1.5 pA and 83 dB minimum CMRR in an 8-pin SOIC package. Input offset voltage is 400 µV maximum, ideal for precision signal chain designs. Available from stock with worldwide shipping.

The LTC6994CS6-2#TRPBF is a programmable delay block IC operating from 0°C to 70°C. It features a single-tap silicon delay line with true output polarity in a compact 6-pin SOT-23 package. Available on the spot market with worldwide shipping.

RF Mixer 2GHz Low Power Downconverting Mixer

Voltage References uP Prec Shunt Volt Ref 1.25V

Analog Switch ICs LOW VOLTAGE SINGEL SPDT

The LTC6904IMS8#PBF is an automotive-grade programmable silicon oscillator from Analog Devices, covering 0.001 MHz to 68 MHz with a squarewave output and output-enable function in an 8-pin MSOP package. It features a fast 1 ns fall time and I2C-compatible frequency programming without external crystals. Available in tube packaging for engineering samples and small-volume production.

LTC2965IDD#PBF is a micropower single-channel voltage monitor and supervisor capable of monitoring rails up to 100 V with adjustable threshold. Operates with extremely low quiescent current in a compact 8-pin DFN package. Ideal for high-voltage power management, telecom, and industrial supervisory circuits requiring wide-voltage monitoring.

Analog Comparators 280MHz Rail-to-Rail CMOS Comparator with Latch

Analog Devices LTC1864LCMS8#TRPBF is a 16-bit successive approximation ADC sampling at 150 ksps from a 3V supply, with 0.0122% max linearity error, in an 8-pin MSOP for precision data acquisition applications.

Analog to Digital Converters - ADC 16-Bit, 2.5Msps SAR ADC with Pin-Configurable Analog Input Range, Serial/Parallel Interface and 96dB SNR

Amplificateurs opérationnels - Amplis-Op QUAD PRECISION RAIL RAIL CHOPPER OP AMP

LDO Voltage Regulators 200mA Negative Vout LDO

Analog Devices LTC6752MPS5#TRMPBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 5 pins, 3.5 V, 5-Pin in SOT23 (5-Pin). From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Silicon Oscillator - 0.001MHz to 68MHz Squarewave Automotive 8-Pin MSOP T/R

n Pin-Compatible Upgrade from the LTC6804 n Measures Up to 12 Battery Cells in Series n 1.2mV Maximum Total Measurement Error n Stackable Architecture for High Voltage Systems n Built-in isoSPITM Interface

n Pin-Compatible Upgrade from the LTC6804 n Measures Up to 12 Battery Cells in Series n 1.2mV Maximum Total Measurement Error n Stackable Architecture for High Voltage Systems n Built-in isoSPITM Interface 48-Lead SSOP Package

IC DECODER VID HDMI 100CSBGA

Analog Devices LTC6752IMS8-2#TRPBF is a 280 MHz CMOS comparator with integrated latch, independent output supply, and shutdown control in an 8-pin MSOP package. It features a maximum input offset voltage of 8.5 mV and 1.25 µA bias current at 25°C. Available on tape and reel from global distributors.

LTC6904MPMS8#PBF is an Analog Devices I2C-programmable silicon oscillator generating 1 kHz to 68 MHz square waves with output enable, 2.7 V to 5.5 V supply, and automotive-grade temperature rating. In MSOP-8. From $5.40 in stock worldwide shipping.

LT3782AEUFD#PBF is a current-mode PWM boost switching controller from Analog Devices supporting 6 V to 40 V input range, designed for two-phase interleaved boost conversion, housed in a 28-pin QFN package.

ADR125AUJZ-R2 is an Analog Devices 5.0 V three-terminal precision voltage reference in a 6-pin SOT-23 package, offering initial accuracy of ±12 mV and low supply current of 50 µA for compact, battery-powered and portable instrumentation designs. From $1.80 in stock with worldwide shipping.