Integrated Circuit

LDO Voltage Regulators IC 300mA LDO CMOS

Analog Comparators Rail to rail,sing chan, TTL/CMOS Compara

Digital to Analog Converters - DAC 8-bit Vout DAC SC70 (2.5V ref, reset to zero scale) Single 12-/10-/8-Bit Rail-to- Rail DACs with 10ppm/°C Reference in SC70

The LTC1563-2CGN#PBF is a 4th-order active low-pass filter IC with a cutoff frequency range of 0.256 kHz to 256 kHz. It integrates resistors and capacitors in a 16-pin SSOP package for easy implementation. Available from authorized distributors with worldwide shipping.

Precision Amplifiers Dual Zero-Drift Op Amp

Analog Devices LTC7862EFE#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 20 pins, 140 V, -40°C to 125°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LT3579IUFD-1 is a multi-topology current-mode PWM switching regulator with 6 A output and 2.5 V to 16 V input range, housed in a compact 20-pin QFN package for flexible DC/DC power conversion in portable and industrial systems.

Analog Devices ADCMP600BKSZ-REEL7 is a single-channel, rail-to-rail high-speed voltage comparator with TTL/CMOS-compatible output, a 5 µA maximum bias current, and 5 mV maximum input offset voltage, packaged in a compact 5-pin SOT-23 for space-constrained signal detection circuits.

LTC1550LCS8-2#PBF is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 8 pins, Small Outline Packages, and datasheet-backed parameters. Available through FindMyChip sourcing with worldwide shipping support.

The LT3462AEDC#TRPBF is a 300 mA inverting DC/DC converter operating at 2.7 MHz with 2.5 V to 16 V input, using current-mode PWM control in an 8-pin DFN package to generate negative supply rails for analog and mixed-signal circuits.

LT1723CMS8#PBF is a dual 200 MHz voltage-feedback operational amplifier from Analog Devices offering low noise and precision performance with 75 dB CMRR and 850 µV maximum input offset voltage. It suits high-speed signal conditioning, active filters, and precision instrumentation designs in an MSOP-8 package.

LVDS Interface IC MLVDS Xcvr,HD,200M Type 1 Rx,EnhancedESD

RS-232 Interface IC +5V RS232/RS485 Transceiver

Single Channel, 128-Position, I2C, ±8% Resistor Tolerance, Nonvolatile Digital Potentiometer

Analog Devices LTC6992IS6-1#TRMPBF is a voltage-controlled PWM oscillator with 0% to 100% duty cycle control via a 0.1 V to 0.9 V analog input. Operating from DC to 1 MHz frequency range, it is ideal for analog PWM signal generation, LED dimming, and motor control in a 6-pin SOT-23 package.

General Purpose Audio Codec 2ADC / 2DAC Ch Automotive 32-Pin LFCSP EP T/R

36 V, 18 MHz, Low Noise, Fast Settling Single Supply, RRO, JFET Op Amp

Analog Devices AD607ARS, Up-Down Converter & Mixer Circuit 20-Pin SSOP

LTC2392CLX-16#PBF is a 16-bit successive-approximation ADC from Analog Devices offering 500 ksps throughput with serial and parallel interface options and a maximum conversion time of 1.3 µs. It accepts differential analog inputs from -2.5 V to 4.75 V in a 48-pin LQFP package. Available from stock with worldwide shipping.

Analog Devices LT6658AHMSE-5#PBF is a low-noise, high-current, dual-output precision voltage reference providing a tight 5 V output with ±2.5 mV accuracy, capable of sourcing and sinking high load currents in a 16-pin SOIC package.

Analog Devices LT1375CN8-5 is a 500 mA fixed 5 V output current-mode PWM step-down switching regulator accepting 5 V to 25 V input in an 8-pin PDIP package. Delivers high efficiency DC-DC conversion for embedded power supplies.

Digital to Analog Converters - DAC CMOS 12B SERIAL IC

The LTC4368HDD-1#PBF is an automotive-grade under/overvoltage supervisor and protection IC from Analog Devices in a 10-pin DFN package. It features adjustable threshold levels to protect downstream circuits from supply transients and fault conditions. Designed for 1-channel protection in automotive and industrial environments.

LTC4301LCDD#PBF is an Analog Devices supply-independent I2C bus buffer in an 8-pin DFN package that isolates capacitive loads and enables hot-swappable bus segments. It supports bidirectional SDA and SCL buffering across different supply voltage domains without requiring matched supply rails. Available in stock with worldwide shipping.

Low quiescent current boost, SEPIC, and inverting DC-DC converter with a 4 A, 60 V internal switch. Accepts 2.8 V to 60 V input with current-mode control and pulse-skip for high efficiency at light loads. Suited for industrial, automotive, and wide-input portable power supplies.

RF Mixer 2GHz to 14GHz Microwave Mixer with low IF Frequency

RS-232 Interface IC RS232/RS485 Multiprotocol Transceiver with Integrated Termination (Shared I/O)

LDO Voltage Regulators 20V 200mA LDO 1.8Vo

MCU 16-bit/32-bit ARM7TDMI RISC 32KB Flash 9V/12V/15V Automotive 48-Pin LFCSP EP Tray

Analog Devices LTC6992IS6-3#TRMPBF is a silicon oscillator-based PWM generator in a 6-pin SOT-23 package, offering 0% to 95% pulse width control via a 0.1–0.9 V control voltage. Operating frequency is programmable from 3.18 Hz to 1 MHz using a single external resistor. Available in tape and reel from authorized distributors with worldwide shipping.

Switching Voltage Regulators 6V/6A High Eff Step-Dwn DC-to-DC Rg

Analog Devices LT6658BIMSE-3.3#PBF is a precision 3.3 V voltage reference with dual outputs, ultra-low noise, and high output current capability in a 16-pin SOIC package, offering tight 0.2% initial accuracy for demanding analog systems.

LT1012AIN8#PBF is a single precision general-purpose op-amp with 180 µV max offset voltage, 128 dB typical CMRR, and ±20V supply range. It features 0.8 nA max bias current in a through-hole 8-pin PDIP package. Available from stock with worldwide shipping.

LDO Voltage Regulators Low Iq LDO with Passthrough option

LTC6655CHLS8-2.5#PBF is an ultra-low-noise 2.5 V precision voltage reference from Analog Devices in an 8-lead ceramic LCC package, delivering 0.05% initial accuracy and 2 ppm/°C temperature coefficient for demanding analog front-end designs.

The LTC4368IMS-1#PBF is a 100 V surge protection controller from Analog Devices that guards against overvoltage, undervoltage, overcurrent, and reverse supply conditions with a -50 mV reverse threshold. It features adjustable thresholds and a single-channel architecture in a 10-pin MSOP package. Available from stock worldwide with fast shipping.

The LT®8364 is a current mode DC/DC converter with a 60V, 4A switch operating from a 2.8V to 60V input. With a unique single feedback pin architecture it is capable of boost, SEPIC or inverting configurations. Burst Mode operation consumes as low as 9µA quiescent current to maintain high efficiency at very low output currents, while keeping typical output ripple below 15mV. An external compensation pin allows optimization of loop bandwidth over a wide range of input and output voltages and programma

Power Management Specialized - PMIC 3.5A TEC Controller

LDO Voltage Regulators Low Iq LDO with Passthrough option

LTZ1000CH#PBF is an ultra-precision two-terminal voltage reference from Analog Devices, delivering a 6.9 V to 7.45 V output with sub-ppm-level temperature coefficient in an 8-pin metal can (TO-99) package. It is the industry standard reference for the most demanding metrology and calibration applications. Available from stock worldwide with competitive pricing.

LDO Voltage Regulators COM/I&I require low noise LDO w/ 5A rati

Ultralow Power Boost Regulator with MPPT and Charge Management

LDO Voltage Regulators Low Iq LDO with Passthrough option

Linear Voltage Regulators 150mA Low Quiescent Crnt CMOS

The LTC6262ITS8#TRMPBF is a dual 30 MHz voltage-feedback operational amplifier from Analog Devices, offering a 7 V/µs slew rate, 90 dB CMRR, and 1.8 V to 5.25 V supply range in an 8-pin TSOT-23 package. It features a 0.05 µA bias current at 25°C and internal frequency compensation for stable operation across single-supply embedded designs. Available on tape and reel in moisture-proof packaging for automated SMT assembly.

The LTC6362CMS8#TRPBF is an automotive-grade single differential amplifier from Analog Devices with rail-to-rail input and output, ±2.625 V or 5.25 V supply operation, and 98 dB typical CMRR. Housed in an MSOP-8 package, it features 0.85 µA maximum input bias current and is AEC-Q100 qualified for reliable performance from -40°C to +125°C. Ideal for SAR ADC drivers, balanced line receivers, and automotive sensor interfaces.

Analog Devices LTC4364CMS-1#TRPBF is a single-channel 80V N-channel high-voltage hot swap and input fault protection controller for positive automotive rails. It features a 2.2V output reset threshold and 16-pin MSOP package for space-constrained designs. Available in tape-and-reel with worldwide shipping.

LTC2055HVHMS8#PBF is a dual zero-drift operational amplifier with rail-to-rail output, featuring a maximum offset voltage of 5 µV and ±5.5 V supply range in an 8-pin MSOP package. Automotive-grade with 115 dB CMRR minimum and 0.003 µA bias current. Available from stock worldwide with competitive pricing.

IC OPAMP DIFF 180MHZ RRO 8DFN

Current & Power Monitors & Regulators 8-Channel PMBus Power System Manager Featuring Accurate Output Voltage Measurement