Integrated Circuit

Analog Devices LTC6091IUFE#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 16 pins, 140 V, -40°C to 85°C in HVQCCN. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LTC2641IMS8-14#TRPBF is a single-channel 14-bit unbuffered voltage output DAC with serial SPI interface, housed in an 8-pin MSOP package. It supports unipolar output voltage up to 2.5 V with offset binary input coding, ideal for precision signal generation, calibration, and industrial control applications.

Analog Devices LT1999CMS8-20F#TRPBF is a high-voltage bidirectional current-sense amplifier with 105 dB CMRR, 1500 µV maximum input offset voltage, current-feedback architecture, and an 8-pin MSOP package engineered for Pin FMEA robustness.

Analog Devices LTC4091EDJC#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 22 pins, 36 V, -40°C to 125°C in HVSON. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

The LT1999CMS8-10#PBF is a high-voltage bidirectional current-sense amplifier from Analog Devices with 120 dB CMRR, fixed 10 V/V gain, 1.5 mV input offset voltage, and wide common-mode input range, housed in an 8-pin MSOP package.

Analog Devices LT6106HS5#TRMPBF is a precision high-side current sense amplifier with 36 V input range, 350 µV max offset voltage, and 200 kHz bandwidth in a compact 5-pin SOT-23 package. Enables accurate current monitoring in battery and power management circuits.

OR Controller P-channel Single 0.245Ohm 5-Pin TSOT-23 T/R

DC/DC Cntrlr Single-OUT Step Down 600kHz Automotive 10-Pin MSOP EP T/R

Analog Devices LTC2488IDE#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 14 pins, 16-bit, -40°C to 85°C in Small Outline No-lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LT1999CMS8-50 is a high-voltage bidirectional current sense amplifier with 120 dB CMRR, 1500 µV offset voltage, current-feedback architecture, and SO-8 package for precision power monitoring.

Analog Devices LT1970ACFE#PBF is a 500mA power operational amplifier with adjustable current limit, 105 dB CMRR, 1 mV maximum offset voltage, and voltage-feedback architecture in a 20-pin SOIC for precision high-current signal conditioning.

High Speed Operational Amplifiers Dual, 80MHz R-to-R In/Out Precision OA

Analog Devices LTC6930IMS8-7.37#PBF is a precision silicon oscillator generating 7.3728 MHz with eight selectable output frequencies down to 57 kHz in an MSOP-8 surface mount package. Features CMOS output with 3 ns fall time and 5 pF output load capability. Available from stock with worldwide shipping.

Digital to Analog Converters - DAC Single Unipolar 12-bit Unbuffered Vout DACs

Analog Devices LTC2057IMS8#PBF is a integrated circuit for industrial, embedded, repair, and production electronic designs. Key specs include 8 pins, -40 to 85 °C, 1.5 MHz, 1 kHz, with TSSOP packaging. Use it for industrial control, embedded systems, repair sourcing, prototyping, and production builds with RFQ pricing, inquiry stock support, and worldwide shipping.

Analog Devices LT1970AIFE#PBF is a 500 mA high-current power operational amplifier with adjustable current limit, 105 dB CMRR, and 1.3 mV max offset voltage in a 20-lead SOIC package. Ideal for precision servo and actuator drive circuits. In stock with worldwide shipping.

LTC6404CUD-1#PBF is a single differential amplifier with rail-to-rail output from Analog Devices, operating up to 5.25 V supply and automotive-grade qualified, housed in a 16-pin QFN package. Supports high-speed ADC driver applications with worldwide shipping.

Analog Devices LT3517EUF#PBF is a high-efficiency serial-interface LED display driver supporting 3-segment RGB and single-color LED strings with programmable current control and a compact 16-pin QFN package for portable and backlight applications.

High Speed Operational Amplifiers Dual, 80MHz R-to-R In/Out Precision OA

Analog Devices LT1801CMS8#TRPBF is a dual 80 MHz rail-to-rail input/output precision operational amplifier in an MSOP-8 package. It features 105 dB common-mode rejection ratio and 1.5 µA maximum bias current for high-accuracy signal conditioning. Available worldwide with in-stock shipping.

The LT6376HDF#PBF is a precision general-purpose operational amplifier from Analog Devices in a compact 14-DFN package. It delivers a 300 kHz (0.3 MHz) bandwidth with a minimum 86 dB CMRR and a maximum input offset voltage of 2000 µV. Available from authorized distributors with worldwide shipping.

LT6011CDD#PBF is a dual micropower precision rail-to-rail output operational amplifier with 135 dB CMRR and 1.2 nA max bias current. It features voltage-feedback architecture in a compact SOT-23-style no-lead package. Available from stock with worldwide shipping.

Digital to Analog Converters - DAC Single Unipolar 12-bit Unbuffered Vout DACs

RF Switch SPDT 0MHz to 20GHz 33dB 16-Pin QFN EP T/R

Analog Devices LTC6993HS6-1 is a monostable multivibrator one-shot IC with rising edge trigger and non-retriggerable output. It operates with a supply voltage of 2.25 V to 5.5 V in a compact SOT-23 6-pin package, offering precision pulse-width timing from 1 µs to 33 s.

32-bit Microcontrollers - MCU FS90AS048AG - Communication Controller

Analog Devices LTC2862ACS8-1#PBF is a half-duplex RS-485/RS-422 line transceiver in an 8-pin SO package, supporting differential Schmitt trigger input with EIA-485 standard compliance for robust multi-drop serial communication in industrial networks.

IC REG BOOST ADJUSTABLE 1A 8DFN

VCO Oscillators VCO with Confirgurable Gain and Voltage Range

Surge Suppressors Low Quiescent Current Surge Stopper with Selectable Clamp and Retry

Digital Isolators 7 Ch, Isolator for SPI Interface

Voltage References 5.0 Voltage Reference

VCO Oscillators VCO with Confirgurable Gain and Voltage Range, MP

20 V, 200 mA, Low Noise, CMOS LDO Linear Regulator

Precision Amplifiers Over-the-Top uP R-to-R I/O OA

Analog Devices LTC4312CMS#PBF is a pin-selectable 2-channel I2C bus multiplexer with integrated bus buffers in a 16-pin MSOP package. It isolates capacitance on each I2C channel and supports bus speeds up to 400 kHz Fast Mode and 1 MHz Fast-Mode Plus. RoHS-compliant and available from stock with worldwide shipping.

Analog Devices LTC3832-1ES8#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 8 pins in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

ANALOG DEVICES - AD8566ARMZ-REEL - OP-AMP, DUAL, 5MHZ, 6V/US, MSOP-8

Analog Devices LTC3528EDDB-2#TRMPBF is a 1 A synchronous step-up DC/DC converter switching at 2 MHz with input voltage range of 0.5 V to 5.5 V and adjustable output from 1.6 V to 5.25 V. Housed in a compact 2 mm x 3 mm DFN package enabling ultra-small battery boost solutions. Available from authorized distributors with worldwide shipping.

Analog to Digital Converters - ADC Serial 16-Bit, 200ksps ADC

LT8619EMSE-5#PBF is a 60 V, 1 A synchronous monolithic buck regulator from Analog Devices operating at 3 MHz with an ultra-low quiescent current of 3.5 µA, housed in a 16-lead MSE small outline package. It features current-mode PWM control and accepts input voltages from 3 V to 60 V, enabling efficient power conversion across a wide input range. Available through authorized distributors with worldwide shipping.

Analog Devices LTC4380IDD-4#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 10 pins, -40°C to 85°C in Small Outline No-lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LT8619IDD#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 10 pins, 60 V, 1A in Small Outline No-lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LTC6990IS6#TRMPBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 6 pins, -40°C to 85°C in SOT23 (6-Pin). From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

IC LED DRIVER CTRLR DIM 28TSSOP

Instrumentation Amplifiers Precision Instrumentation Amplifier

Dual zero-drift operational amplifier with 130 dB CMRR and 3 µV max input offset voltage. Designed for precision signal conditioning in industrial and instrumentation applications. Available in MSOP-8 package with extended temperature range.

LT8619EDD is a 60V input, 1A synchronous monolithic step-down DC-DC converter switching at up to 3MHz. It features current-mode PWM control in a compact 10-lead DFN package, ideal for high-voltage efficiency.

The LTC® 1759 Smart Battery Charger is a single chip charging solution that dramatically simplifies construction of an SBS compliant system. The LTC1759 implements a Level 2 charger function whereby the charger can be programmed by the battery or by the host. A thermistor on the battery being charged is monitored for temperature, connectivity and battery type information. The SMBus interface remains alive when the AC power adapter is removed and responds to all SMBus activity directed to it, inclu

Data Acquisition ADCs/DACs - Specialized SGL-Phase Metering w/ di/dt Input