LT3782AEUFD#PBF Analog Devices Integrated Circuit (Quad Flat No-Lead) In Stock
LT3782AEUFD#PBF is a current-mode PWM boost switching controller from Analog Devices supporting 6 V to 40 V input range, designed for two-phase interleaved boost conversion, housed in a 28-pin QFN package.
- Manufacturer
- Analog Devices
- Package
- Quad Flat No-Lead
- Pin Count
- 28
- Lifecycle
- ACTIVE
- Datasheet
- LT3782AEUFD#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $6.0500(MOQ 1)
- Temp Range
- ?°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Two-phase interleaved current-mode PWM boost controller reduces input and output ripple current at 6 V to 40 V input
- Wide 6 V to 40 V input range covers automotive 12 V, 24 V, and 48 V bus standards in a single design
- Accurate current sensing and cycle-by-cycle current limit protects inductors and switches in high-power boost stages
- 28-pin QFN package integrates gate drive, oscillator, and soft-start reducing external component count
Applications
The LT3782AEUFD#PBF targets high-power boost converter designs in automotive and industrial systems where a two-phase interleaved topology is needed to reduce ripple at input and output without increasing capacitor count. It is well-suited for 12 V to 48 V pre-boost stages feeding inverter rails in electric vehicle auxiliary power units and industrial DC bus systems. Telecom and datacom equipment designers also use it for high-efficiency 48 V boost converters supplying PoE or distributed power buses.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1712 |
| YTEOL | 10 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Input Voltage-Max | 40V |
| Input Voltage-Min | 6V |
| Input Voltage-Nom | 13V |
| JESD-30 Code | R-PQCC-N28 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Output Current-Max | 4A |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR |
| Package Style | CHIP CARRIER |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Supply Current-Max (Isup) | 16mA |
| Surface Mount | YES |
| Switcher Configuration | PHASE-SHIFT |
| Switching Frequency-Max | 533kHz |
| Technology | BIPOLAR |
| Temperature Grade | OTHER |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Quad Flat No-Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What input voltage range does LT3782AEUFD#PBF support and how does that cover automotive 12 V and 48 V systems?
LT3782AEUFD#PBF operates with a 6 V to 40 V input, covering both 12 V automotive batteries and 24 V industrial bus applications directly. For 48 V systems, additional input attenuation or a front-end stage is needed, but the 40 V maximum handles transient spikes on 24 V and nominal 36 V bus rails common in mild-hybrid vehicles.
How does the two-phase interleaved topology of LT3782AEUFD#PBF reduce filtering requirements versus a single-phase boost?
In a two-phase interleaved boost converter, each phase switches 180 degrees out of phase with the other, so input and output ripple currents partially cancel. This reduces peak-to-peak ripple current by up to 50% at the crossover duty cycle, allowing the designer to use smaller input and output capacitors while still meeting EMI and voltage ripple specifications.
What control mode does LT3782AEUFD#PBF use and what protection features are built in?
LT3782AEUFD#PBF uses peak current-mode PWM control, which provides inherent cycle-by-cycle current limiting that protects the external switches and inductors from overcurrent during load transients or start-up. It also includes soft-start, undervoltage lockout at approximately 6 V, and programmable slope compensation for duty cycles above 50%.
For a 12 V to 28 V boost converter at 10 A output, what switching frequency range does LT3782AEUFD#PBF support?
LT3782AEUFD#PBF supports an adjustable switching frequency set by an external resistor, typically ranging from 100 kHz to 500 kHz per phase. At 200 kHz per phase in two-phase operation, the effective ripple frequency at the output is 400 kHz, enabling a compact output filter for a 12 V input to 28 V output, 10 A boost stage in industrial power supplies.
Related Guides
How to Choose a 3528 SMD Indicator LED for Blue Status Lighting: Selection Guide
A practical 3528 SMD indicator LED selection guide using 150141BS73100 and related Wurth 150141 variants for blue status lighting.
Jul 5, 2026
BAS70KFILM Design Guide for Low-Leakage Signal Clamping and RF Detector Inputs
Practical BAS70KFILM design guidance for signal clamps, RF detector inputs, leakage control, capacitance, layout, and sourcing alternatives.
Jul 5, 2026
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $8.5300 | $8.53 |
| 19+ | $8.0200 | $152.38 |
| 1000+ | $6.0500 | $6050.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”