LT3462AEDC#TRPBF Analog Devices Integrated Circuit (Small Outline No-lead) In Stock

The LT3462AEDC#TRPBF is a 300 mA inverting DC/DC converter operating at 2.7 MHz with 2.5 V to 16 V input, using current-mode PWM control in an 8-pin DFN package to generate negative supply rails for analog and mixed-signal circuits.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LT3462AEDC#TRPBFSmall Outline No-lead
Quick Facts
Manufacturer
Analog Devices
Package
Small Outline No-lead
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $3.1600(MOQ 19)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 2.7 MHz switching frequency enables use of tiny inductors and capacitors, reducing total solution size for negative rail generation in space-constrained designs
  • 300 mA output current capacity with 2.5 V to 16 V input range, supporting negative voltage generation from 3.3 V, 5 V, and 12 V positive supply rails
  • Current-mode PWM control provides inherent cycle-by-cycle current limiting and fast transient response, improving stability across wide load-current variations
  • Compact 8-pin DFN package (2 mm × 3 mm footprint) with exposed thermal pad for efficient heat transfer, enabling high power density inverting converter designs

Applications

The LT3462AEDC#TRPBF is used to generate negative supply rails—such as -5 V or -12 V—from a positive input in analog signal-conditioning circuits, op-amp bias networks, and LCD contrast voltage generators where a negative supply is required but only a single positive rail is available from the main power system. Its high 2.7 MHz switching frequency and tiny DFN package also suit portable instruments, medical sensors, and high-density mixed-signal PCBs where inductor size and board area are tightly constrained.

Specifications

Pbfree CodeNo
Manufacturer Package Code05-08-1719
YTEOL10
Analog IC - Other TypeSWITCHING REGULATOR
Control ModeCURRENT-MODE
Control TechniquePULSE WIDTH MODULATION
Input Voltage-Max16V
Input Voltage-Min2.5V
Input Voltage-Nom3V
JESD-30 CodeS-PDSO-N8
JESD-609 Codee3
Number of Functions1
Output Voltage-Max-38 V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOLCC8,.08,18
Package ShapeSQUARE
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Supply Current-Max (Isup)3.6mA
Surface MountYES
Switcher ConfigurationINVERTER
Switching Frequency-Max3500kHz
TechnologyBIPOLAR
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormNO LEAD
Terminal Pitch0.45mm
Terminal PositionDUAL
PackageSmall Outline No-lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginMalaysia

Datasheet

LT3462AEDC#TRPBF Datasheet Download

Official datasheet from Analog Devices

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

At what switching frequency does LT3462AEDC#TRPBF operate, and how does that affect external component sizing?

The LT3462AEDC#TRPBF operates at a fixed 2.7 MHz switching frequency. This high frequency allows the use of inductors as small as 2.2 µH to 4.7 µH and output capacitors of 10 µF or less, dramatically reducing the physical size of the inverting converter compared to designs running at 300 kHz to 500 kHz that require 22 µH to 47 µH inductors.

What input voltage range does LT3462AEDC#TRPBF support, and can it invert from a 3.3 V single-supply system?

The LT3462AEDC#TRPBF accepts input voltages from 2.5 V to 16 V, so a 3.3 V single-supply system sits comfortably within its operating range. The inverting topology converts the positive 3.3 V input to a negative output voltage—typically -3.3 V or -5 V depending on the feedback network—enabling dual-supply op-amp circuits from a single positive rail without a second power supply.

How much output current can LT3462AEDC#TRPBF supply, and is 300 mA sufficient for a negative rail driving multiple op-amp stages?

The LT3462AEDC#TRPBF delivers up to 300 mA of output current. A typical precision op-amp draws 5 mA to 15 mA quiescent current, so the converter can simultaneously bias 20 or more op-amp channels on the negative rail—more than adequate for multi-channel analog front-ends, audio preamplifier arrays, or sensor conditioning boards with 10 to 16 differential input stages.

What PCB package does LT3462AEDC#TRPBF use, and what layout precautions improve efficiency at 2.7 MHz?

The LT3462AEDC#TRPBF is housed in an 8-pin DFN package with a 2 mm × 3 mm footprint and an exposed thermal pad for heat sinking. At 2.7 MHz, parasitic inductance in the switch node loop is critical; keep the input capacitor, inductor, and output capacitor within a 5 mm radius of the IC, use a continuous ground plane beneath the DFN pad, and minimize the switch node copper area to reduce radiated EMI.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $3.1600
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
19+$4.1900$79.61
500+$3.4375$1718.75
1000+$3.1600$3160.00
pcs
Unit price: $4.1900 · Total: $79.61

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India