Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 59,901–59,950 of 77,666
Logic Gates Dual 4 input POS AND gates
Quadruple 2-Line To 1-Line Data Selectors/Multiplexers
Texas Instruments LOG112AIDE4 is a SEARAY high-speed board-to-board array connector. It provides 14 positions on a .050 in pitch open-pin-field terminal. From inquiry pricing, request current stock for worldwide shipping.
NAND Gate 4-Element 2-IN CMOS 14-Pin TSSOP T/R
Hex Schmitt-Trigger Inverters
Texas Instruments CD74HC02EE4 is a quad 2-input NOR gate in the high-speed CMOS HC/UH logic family housed in a 14-pin DIP package. Provides 4 independent NOR gates with 50 pF load capacitance and 5.2 mA output sink current for 2-5.5 V operation. Available from stock with worldwide shipping.
Adaptive zero voltage switching active-clamp flyback controller
Complete DDR2/3/3L/4 Memory Power Solution Synchronous Buck Controller, 2-A LDO
Flip Flop D-Type Bus Interface Pos-Edge 1-Element 16-Pin CDIP Tube
The PTLV9002IPWR is a dual-channel, 1 MHz rail-to-rail input/output operational amplifier from Texas Instruments, operating on a 1.8 V to 5.5 V supply. It delivers low-power, cost-optimized signal conditioning in a compact SOT-23 package, suitable for portable and industrial applications.
Analog to Digital Converters - ADC 12-Bit 4-Ch Serial Output Sampling
TEXAS INSTRUMENTS - MSP430F2121TDW - MSP430 Microcontroller, MSP430 Family MSP430F2x Series Microcontrollers, MSP430, 16bit, 16 MHz
Conv DC-DC 4.5V to 17V Synchronous Step Down Single-Out 0.6V to 1.87V 5A 20-Pin HTSSOP EP Tube
The Texas Instruments LM2903DR. is a dual voltage comparator supporting supply voltages of ±15 V or 30 V single supply, housed in an 8-pin SOIC tape-and-reel package. It features open-collector outputs compatible with various logic families, low input offset voltage, and wide supply range. Available in stock worldwide with fast shipping and competitive pricing.
Operational Amplifiers - Op Amps Lo-Pwr JFET-Input Op Amp
CD54AC04F3A is a hex inverter logic IC from Texas Instruments in the AC CMOS family, offering six independent inverter gates with 50 pF load capacitance rating, 24 mA output sink current, and a 14-pin ceramic DIP package for military-grade high-reliability signal conditioning.
The CD54HC73F3A is a dual JK-type negative-edge-triggered flip-flop IC by Texas Instruments, housed in a 14-pin CDIP ceramic package. It operates up to 20 MHz with a load capacitance of 50 pF and belongs to the HC/UH logic family. Available from stock with worldwide shipping for reliable digital logic designs.
The CD54ACT161F3A is a synchronous 4-bit binary up-counter from Texas Instruments in the ACT CMOS family, housed in a 16-pin ceramic DIP package for high-reliability applications. It features synchronous load, synchronous clear, carry output (TCO), and a 50 pF load capacitance rating for military and industrial use. Available from stock with worldwide distribution.
Texas Instruments CD54HC139F is a dual 2-to-4 line decoder and demultiplexer in the HC/UH CMOS logic family. It operates with a 50 pF load capacitance and provides 5.2 mA maximum sink current per output across industrial temperature ranges. Housed in a 16-pin ceramic DIP package for high-reliability military and industrial applications.
Charge Pump STPUP 5V to 11V 40mA 6-Pin SOT-23 T/R
Logic Gates High Speed CMOS Logic Quad 2-Input AND Gates 14-CDIP -55 to 125
Current-Mode PWM Controller
1-Channel Single ADC Delta-Sigma 20Msps 16-bit Serial LVDS Automotive 16-Pin SOIC Tube
Octal Channel Single ADC Delta-Sigma 15sps 24-bit Serial 28-Pin SSOP Tube
Single Channel Single ADC Delta-Sigma 128sps 16-bit Serial 6-Pin SOT-23 T/R
PLASTIC, DIP-16
Economy single ended 500KHz current mode PWM controller with 16V/10V UVLO 100% duty cycle, 0-70C
Analog to Digital Converters - ADC 2.7-5.5V,16B 500KSPS Low Pwr Serial ADC
CD4504BMG4 is a CMOS hex voltage-level shifter from Texas Instruments that translates TTL and CMOS logic levels across mixed-voltage systems, offering 6 independent channels with push-pull outputs, up to 280 ns propagation delay, in a 16-pin SOIC package. From $0.60 in stock worldwide shipping.
Hall Effect Sensor Omnipolar 3.3V/5V/9V/12V/15V/18V/24V Automotive 3-Pin SOT-23 T/R
4.5V to 17V Input, 0.6V-10V Output, 6A Power Module in Compact 7.5x7.5mm Footprint
Adjustable Precision Micropower Shunt Voltage Reference, 1.0% accuracy
The SN7425NE4 is a dual 4-input NOR gate IC from Texas Instruments in the TTL/H/L logic family. It features strobed outputs, a maximum IOL of 16 mA, and operates with a 15 pF load capacitance. Housed in a 14-pin PDIP through-hole package (R-PDIP-T14), it is lead-free and suitable for classic TTL logic designs.
TLC5941RHBRG4 is a 16-channel constant-current LED driver from Texas Instruments with 12-bit grayscale PWM and 6-bit dot-correction per channel. It operates from 3.3 V or 5 V logic and fits a compact 32-pin VQFN package for high-density LED matrix applications.
LED DRVR 16Segment 3.3V/5V 32-Pin VQFN EP T/R
Quadruple 2-Input Exclusive-OR Gates
10-Bit Universal Schmitt-Trigger Buffers With 3-State Outputs
The CD74HC153MG4 is a dual 4-to-1 CMOS multiplexer with 2 independent sections, 4 mA output drive, and 50 pF load capacity in a 16-pin SOIC package. It operates across a 2 V to 6 V supply range with TTL-compatible control inputs. Available from stock worldwide with RoHS-compliant e4 Pb-free finish.
Texas Instruments CD74ACT280E is a high-speed ACT-family 9-bit odd/even parity generator and checker IC in a 14-pin DIP package. It supports 75 mA output sink current and propagation delays as low as 5 ns at 5 V with 50 pF load. Available in stock worldwide at competitive pricing with fast shipping.
Audio Amp Speaker 1-CH Mono 1W Class-D 16-Pin TSSOP T/R
Texas Instruments OPA381AIDRBTG4 is a precision, low-power, high-speed transimpedance amplifier optimized for photodiode current-to-voltage conversion in optical sensing applications. It features wide bandwidth and low input bias current enabling accurate detection of small photocurrents. Suited for optical proximity sensors, pulse oximeters, barcode scanners, and industrial light measurement systems requiring fast and precise analog signal processing.
Buffers & Line Drivers Quad Bus Buff Gate With 3-State Outputs
High Speed Operational Amplifiers Precision Lo-Power Hi-Sp Transimpedance
Texas Instruments THS4505DGNG4 is a wideband fully differential amplifier in an 8-pin HVSSOP package with exposed pad. It operates from ±7.5 V or 15 V single supply, delivering 370 MHz bandwidth and 800 V/µs slew rate. Ideal for driving high-speed ADC inputs and differential signal processing chains.
SimpleLink Ultra-Low-Power 32-Bit Arm Cortex-M4F MCU with Precision ADC, 1MB Flash and 256KB RAM
OR Gate 4-Element 2-IN Bipolar 14-Pin SOIC Tube
Operational Amplifiers - Op Amps Quad Lo-Noise JFET- Inp Gen-Purp Op Amp
The CD74ACT280M is a 9-bit odd/even parity generator and checker in ACT-family logic, capable of sink currents up to 75 mA per output and housed in a 14-pin SOIC package. It simultaneously provides both odd and even parity outputs for efficient error detection across 9 data bits. Available from major distributors with worldwide shipping.
Operational Amplifiers - Op Amps Quad Low-Noise JFET-Input
Use the download button to access the TPS62111RSAR schematic symbol, PCB footprint, and 3D model.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote