Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 60,001–60,050 of 77,666
Texas Instruments PCA9306 is a dual bidirectional I2C and SMBus voltage level translator supporting 1.0 V to 3.6 V on one side and 1.8 V to 5.5 V on the other. It handles data rates up to 400 kHz Fast-mode and passes interrupts without glitches. Packaged in 8-pin SSOP for compact board layouts.
3-V to 5-V Multichannel RS-232 Line Driver/Receiver w/ +/-15-kV ESD Protection
SIMPLE SWITCHER® 3.8V to 36V, 2A Synchronous Buck Converter With Ultra-Low EMI
The INA131APG4 is a precision instrumentation amplifier from Texas Instruments with a fixed gain of 100. It delivers 106 dB CMRR, 125 µV max offset voltage, and 70 kHz bandwidth in a DIP-8 package. From competitive pricing with in-stock availability and worldwide shipping.
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOIC T/R
Precision Amplifiers Low Offset Voltage
900-MHz, High Power Output, Current Feedback Amplifier
CAN Interface IC Auto Cat 3.3V CAN Transceiver
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOIC T/R
Precision Amplifiers LinCMOS Precision Dual Op Amp
GREEN, PLASTIC, SOIC-16
Comparator Dual 5.5V 8-Pin SOIC T/R
DIP-16
The SN74AHCT14NSRE4 is a hex Schmitt-trigger inverter IC from Texas Instruments, featuring 6 inverting channels with hysteresis inputs for improved noise immunity. It operates on a 4.5 V to 5.5 V supply, supports input voltages from 0 V to 5.5 V, and is packaged in a 14-pin SOIC.
SN74AHCT14NE4 is a hex Schmitt-trigger inverter from Texas Instruments in the AHCT logic family, featuring 6 independent Schmitt-trigger inverting channels in a 14-pin PDIP package. Operating from a 4.5 V to 5.5 V supply, it provides hysteresis for noise-immune signal conditioning of slow or noisy input waveforms. Designed for waveform squaring, debouncing, and level translation in digital logic and microcontroller applications.
SN74AHC08NE4 is a quad 2-input AND gate from Texas Instruments in the AHC CMOS logic family, providing four independent AND functions in a 14-pin PDIP package. The device operates from 2 V to 5.5 V, delivers up to 8 mA sink current per output, and offers 50 pF load drive capability with fast propagation delays. It is designed for signal gating, clock control, and combinational logic in industrial and consumer electronics.
The CD4069UBMG4 is a CMOS hex inverter IC featuring 6 unbuffered inverter elements in a 14-pin SOIC package. It operates across a wide supply voltage range with 50 pF load capacitance. Available from stock worldwide with competitive pricing.
LDO Voltage Regulators High PSRR Fast RF Low-Enable 100mA
Power Factor Correction - PFC PFC Controller
Voltage Mode PWM Controller 1A 14-Pin PDIP Tube
16 MHz Ultra-Low-Power Microcontroller With 8 KB FRAM, 1 KB SRAM, 60 IO, 10-bit ADC, IR Logic
Precision Amplifiers Dual Enhanced JFET Precision
The TLC272CPWG4 is a dual general-purpose CMOS operational amplifier from Texas Instruments with 16 V maximum supply, 60 pA typical input bias current, 80 dB common-mode rejection ratio, and rail-to-rail output swing in an 8-pin TSSOP package.
Use the download button to access the TPS56528DDA schematic symbol, PCB footprint, and 3D model.
Buffer/Driver 6-CH Inverting Open Drain CMOS 14-Pin TSSOP T/R
LVDS Driver/Receiver 400Mbps 0.454V 5-Pin SOT-23 T/R
Texas Instruments OPA4830IPWG4 is a quad voltage-feedback operational amplifier with rail-to-rail output swing and ±6.6 V / 11 V supply range. It features 80 dB typical CMRR and 76 dB minimum CMRR with a 13 µA max bias current in a 14-pin TSSOP package. Available in stock for signal conditioning and instrumentation designs.
The TL052AIDG4 is a dual JFET-input operational amplifier from Texas Instruments with 3 MHz gain-bandwidth product and 0.0002 µA ultra-low bias current. It achieves 65 dB minimum CMRR and 4.6 mV maximum input offset voltage in an 8-pin SOIC package. Available worldwide for precision analog instrumentation and active filter designs.
Texas Instruments MSP430F2101IDW, 16bit MSP430 Microcontroller, MSP430, 16MHz, 1 kB + 256 B Flash, 20-Pin SOIC
IC REG BCK 1.8V 0.4A SYNC TSOT23
16-bit Ultra-Low-Power Microcontroller, 4kB Flash, 256B RAM, Comparator
Digital to Analog Converters - DAC 12-Bit UltrLo Glitch Vltg Output Cnvtr
PLASTIC, DIP-8
Buffer/Driver 6-CH Non-Inverting Open Drain CMOS 14-Pin SOIC Tube
TEXAS INSTRUMENTS - MSP430F2101TRGET - MCU, 16BIT, MSP430, 16MHZ, VQFN-24
Full Speed USB to Serial Port Controller USB 2.0 3.3V Tray 32-Pin LQFP
Voltage References Low Noise Very Low Drift Prec Vltg Ref
The TL082ACPE4 is a dual JFET-input general-purpose op-amp from Texas Instruments with 86 dB typical CMRR, 200 pA maximum input bias current at 25°C, and 4 MHz gain-bandwidth product, available in an 8-pin DIP package for through-hole designs.
150mA Low-Noise Low-Dropout Regulator With Shutdown
The TL082BCDG4 is a dual general-purpose JFET-input operational amplifier from Texas Instruments with a wide ±18 V supply range and low input bias current of 0.2 nA. It features 86 dB typical common-mode rejection ratio and a 5 mV maximum input offset voltage. Supplied in the standard 8-pin SOIC package for easy SMT assembly.
Texas Instruments LM2765M6X NOPB is a charge pump step-up DC/DC converter boosting from 3.6V input to 11V output at up to 20mA load current. It requires no inductors and operates from a single supply in a compact 6-pin SOT-23 package. A lead-free solution for low-power LCD bias and white LED drive applications worldwide.
NOR Gate 4-Element 2-IN CMOS 14-Pin CDIP Tube
Analog Comparators Single high speed, precision comparator with shutdown 6-SOT-23 -40 to 125
Use the download button to access the ISOW7844DWE schematic symbol, PCB footprint, and 3D model.
VCA810AIDG4 is a voltage-controlled amplifier with voltage-feedback architecture by Texas Instruments in an 8-pin SOIC package. Key specs: 300 µV maximum input offset voltage, 14 µA bias current, frequency compensation for stable operation. Available from stock with worldwide shipping.
Fuel Gauge Lead-Acid/Li-Ion/Li-Pol/NiCd/NiMH 3.3V 28-Pin SSOP T/R
Fuel Gauge Lead-Acid/Li-Ion/Li-Pol/NiCd/NiMH 3.3V 28-Pin SSOP Tube
Use the download button to access the LM35DZLFT1 schematic symbol and PCB footprint.
Precision Amplifiers Dual Enh JFET Prec Op Amp
DC DC Cntrlr Single-OUT Sync Step Down 10V to 55V Input 16-Pin HTSSOP EP T/R
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote