Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 59,801–59,850 of 77,666
Texas Instruments, TAS5086DBTG4 Audio PWM Processor, 38-Pin TSSOP
Quadruple Differential Line Receiver
Translation - Voltage Levels 4-Bit Bi-directional V-Level Translator
RS-422 Interface IC Dual Differential Line Driver
RS-232 Interface IC 3V-5.5V Multch RS232 Comp Line Drvr/Rcvr
Texas Instruments TPS54362HPWP is a 1 A, 48 V step-down DC/DC converter with ultra-low quiescent current using pulse-frequency modulation in a 20-pin HSOP package. It accepts 3.6 V to 60 V input, making it suitable for industrial 24 V and 48 V bus designs. Available from stock with worldwide shipping.
The LM248DG4 is a quad general-purpose operational amplifier from Texas Instruments with voltage-feedback architecture, operating from ±18V dual supply in a 14-pin SOIC package. It features a minimum CMRR of 70 dB (typical 90 dB), 0.2 µA bias current at 25°C, and frequency compensation for stable closed-loop operation across a wide signal bandwidth. Available in stock globally for analog signal conditioning, amplification, and filter applications.
The UCC27322PG4 is a high-speed, low-side gate driver IC from Texas Instruments designed for driving power MOSFETs and IGBTs. It features 4A peak source and 4A peak sink current capability with propagation delays under 20ns in an 8-pin DIP package. Available from stock worldwide with fast shipping.
Texas Instruments DS8921N NOPB is a single RS-422 differential line transmitter/receiver in an 8-pin PDIP package, enabling high-noise-immunity serial data communication over long cable runs. Available from authorized distributors with worldwide shipping.
High Speed Operational Amplifiers 70-MHz Low-Cost Volt-Fdback Amp Dual
USB Type-C™ DP Alt Mode 10 Gbps Linear Redriver Crosspoint Switch for Sink Side
TEXAS INSTRUMENTS - LM4051CIM3-ADJ - VOLTAGE REF, SHUNT, 1.212V-10V, SOT-23-3
70-MHz Low-Cost Voltage-Feedback Amplifier, Dual
Texas Instruments THS4052IDG4 is a dual voltage-feedback operational amplifier in an 8-pin SOIC, supporting wide ±16.5 V or 33 V supply rails with 100 dB CMRR. Available in tube packaging with worldwide shipping.
5V RS-485 Transceivers With ±18kV IEC ESD Protection
DSP Fixed-Point 16bit 233MHz 1864MIPS 352-Pin FCBGA Tray
Texas Instruments TLC2652AC-8DG4 is a precision chopper-stabilized operational amplifier featuring 2.35 µV maximum offset voltage, 120 dB minimum CMRR, and 0.1 nA bias current. Housed in an 8-pin SOIC package for low-noise, high-accuracy signal amplification. Available from stock with worldwide shipping.
Switching Controllers Current-Mode PWM Controller
Analog to Digital Converters - ADC Dual 2MSPS 12B 3+3 or 2+2Ch ADC
Supervisory Circuits 220nA w/ 10ms/200ms Select delay time
Texas Instruments LMR12010X is a current-mode PWM step-down DC-DC regulator accepting 3 V to 20 V input and delivering up to 1 A output. The adjustable output spans 0.8 V to 17 V, and the device comes in a compact 6-pin SOT-23 package for space-constrained power supplies.
Texas Instruments TLC2652ACPE4 is a precision chopper-stabilized operational amplifier with 2.35 µV maximum input offset voltage and 140 dB typical CMRR in an 8-pin DIP package. Features ultra-low bias current of 0.1 pA maximum and LinCMOS architecture for outstanding DC accuracy in instrumentation and sensor conditioning applications. RoHS compliant and available from distributors worldwide.
TEXAS INSTRUMENTS - SN75ALS192NE4 - Line RS422/RS485, 4-drivers, 4.75V-5.25V Supply, DIP-16
Battery Management Li-Ion LDO Linear Charge Management IC
High Speed Operational Amplifiers 250MHz Rail-to-Rail I/O CMOS Single
IC CLK BUFFER 1:10 100MHZ 24SSOP
Telecom Interface ICs Source-Routing Accelerator 44-PLCC
Octal Transparent D-Type Latches With 3-State Outputs
Buffers & Line Drivers 24-BIT FET BUS SWITCH
Texas Instruments 14MHz, MUX-Friendly, Low-noise, Zero-Drift, RRO, CMOS Precision Operational Amplifier 8-SOIC -40 to 125
The Texas Instruments CD74HC7266MT is a quad 2-input XNOR (Exclusive-NOR) gate IC from the high-speed HC CMOS logic family in a 14-pin SOIC package. It features 4 independent gate functions with 5.2mA output drive and 50pF load capacitance handling. Available from global distributors in stock with competitive pricing and worldwide shipping.
Texas Instruments SN74ABT821ADW10-Bit D Type Flip Flop IC, 3-State, 24-Pin SOIC
TEXAS INSTRUMENTS - ADS7863IDBQ - Analogue to Digital Converter, 12 bit, 2 MSPS, Differential, Serial, SPI, Single, 2.7 V
The INA145UAE4 is a single differential amplifier from Texas Instruments, operating on dual ±18V supplies in an 8-pin SOIC package. It features 80 dB common-mode rejection and 1000 µV max offset voltage. Available from stock with worldwide shipping.
Quadruple Differential Line Receiver
Current-Mode PWM Controller
Hot Swap Power Manager For Redundant -48V Supplies
Use the download button to access the TMS320C54CSTPGE schematic symbol, PCB footprint, and 3D model.
Power audio amplifier,LM3875T 56W
Precision Chopper-Stabilized Operational Amplifier
Use the download button to access the TLC2652AI-14D schematic symbol, PCB footprint, and 3D model.
V-Ref Adjustable 2.495V to 37V 100mA 8-Pin SOIC Tube
Use the download button to access the PCA9535DBQR schematic symbol, PCB footprint, and 3D model.
5V RS-485 Transceivers With ±18kV IEC ESD Protection
Instrumentation Amplifiers FET-Input Low Power Instrumentation Amp
Metering Systems on a Chip - SoC A 595-SP430FR60371IPZR
Low power, high voltage window comparator with integrated reference
26V current sense amplifier with integrated over-current comparator for cost-sensitive applications
Use the download button to access the TSV912AIPWR schematic symbol, PCB footprint, and 3D model.
The REF3440IDBVR is a 4.1V low-drift, low-power series voltage reference with an input voltage range of 4.15V to 12V and output up to 4.098V in a compact 6-Pin SOT-23 package. It delivers excellent temperature stability and precision for ADC and DAC reference applications with minimal quiescent current. Available from authorized distributors worldwide with competitive pricing and in-stock availability.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote