Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 59,701–59,750 of 77,666
Buffers & Line Drivers High Speed CMOS Logic Octal Non-Inverting Buffer and Line Drivers with 3-State Outputs 20-CDIP -55 to 125
The CD54ACT541F3A is an 8-channel non-inverting tri-state bus driver from Texas Instruments in the ACT CMOS family, featuring dual active-low output enable controls, 50 pF load capacitance, and a 20-pin ceramic DIP package for high-reliability applications.
Texas Instruments MSP430F5630IZQWR is a 16-bit MSP430 mixed-signal microcontroller running up to 32 MHz with DMA, JTAG boundary scan, and multiple serial interfaces including USB. It operates down to 1.8 V at 8 MHz for ultra-low-power applications in a compact BGA package. Available from stock worldwide.
Texas Instruments CD54HC4040F3A is a single 12-bit binary ripple-carry up counter in the HC/UH family, operating up to 20 MHz with a 50 pF load capacitance in a 16-pin ceramic DIP package. It is suited for frequency division and event counting applications. Available worldwide with Pb-free compliance.
Adjustable precision shunt regulator
OR Gate 4-Element 2-IN CMOS 14-Pin CDIP Tube
Current Mode PWM Controller 18V 200mA 8-Pin VSSOP T/R
LDO Regulator Pos 2.5V 0.2A 5-Pin SOT-23 T/R
The TPS61103PWG4 is a dual-output boost converter with current-mode PWM control, switching at 800 kHz with up to 800 mA output current and an input range of 0.8 V to 3.3 V in a 20-pin TSSOP package. Available from stock with worldwide shipping.
Low Power, Dual Voltage Detector in Small µSON package
Operational Amplifiers - Op Amps Sngl 2.7V Hi-Slew-Rt R-to-R Out w/Shtdwn
LDO Regulator Pos 1.8V3.3V 0.5A/0.25A 20-Pin HTSSOP EP T/R
The CD74HC377PWG4 is an 8-bit positive-edge-triggered D flip-flop register with clock-enable (hold mode) operating up to 20 MHz with 5.2 mA output drive in a 20-pin TSSOP package. It supports a 2 V to 6 V supply range for broad HC-family compatibility. Available from stock worldwide with RoHS-compliant e4 Pb-free finish.
Operational Amplifiers - Op Amps Sngle 2.7V Rail-Rail
TEXAS INSTRUMENTS - OPA2131UAE4 - OP AMP, DUAL FET I/P, 2131, SOIC8
Texas Instruments TMP123AIDBVTG4 is a 12-bit digital SPI temperature sensor accurate to ±0.5°C over -55°C to +125°C. It delivers high-resolution readings in a miniature 6-pin SOT-23 surface-mount package for space-constrained designs. Available from stock with worldwide shipping.
16-bit Microcontrollers - MCU 16-Bit Ultra Low Pwr 1kB Flash 128B RAM
Analog to Digital Converters - ADC 12Bit 66kSPS Ser Out Prog MSB/LSB First
Processor Supervisor 1.25V/2.93V 2.5V/3V/3.3V/5V 8-Pin HVSSOP EP T/R
Buffer/Line Driver 16-CH Non-Inverting 3-ST CMOS 48-Pin SSOP Tube
Processor Supervisor 1.25V/2.93V 2.5V/3V/3.3V/5V 8-Pin SOIC T/R
Differential Bus Transceiver
Switching Voltage Regulators
Use the download button to access the UC3526AJ schematic symbol and PCB footprint.
Texas Instruments UC3526AQG3, Dual PWM Voltage Mode Controller, 100 mA, 650 kHz, 20-Pin PLCC
Use the download button to access the ISO1211D schematic symbol, PCB footprint, and 3D model.
Processor Supervisor 1.25V/2.93V 2.5V/3V/3.3V/5V 8-Pin SOIC Tube
Operational Amplifiers - Op Amps Gen Purp FET-Input Oper Amplifier
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin TSSOP T/R
16-bit Microcontrollers - MCU 16-Bit Ultra Low Pwr 1kB Flash 128B RAM
Translation - Voltage Levels 8B Dual Supply Bus Transceiver
LDO Voltage Regulators Low-Power 150-mA Low-Noise
CD74HC377PWRE4 is an 8-bit D-type flip-flop register from Texas Instruments in the HC/UH logic family, featuring a common clock enable (hold mode) for selective latching of 8 parallel data inputs. Operates at up to 20 MHz clock frequency with 4 mA output drive current and 50 pF load capacitance rating, suitable for data bus buffering and output port expansion. Available in automotive-grade TSSOP-20 tape-and-reel packaging for high-reliability production.
TEXAS INSTRUMENTS - BQ296212DSGT - OVER VOLTAGE PROTECTOR, LI-ION, WSON-8
The INA326EA250 is a precision single instrumentation amplifier from Texas Instruments with rail-to-rail input and output, 5.5 V maximum supply, and a fixed gain of 250 V/V in a compact 8-pin VSSOP package for low-voltage measurement applications.
Conv DC-DC 1.8V to 5.5V Step Up Single-Out 5V 1A 16-Pin HTSSOP EP T/R
TEXAS INSTRUMENTS - BQ294533DRVT - Li-Ion, Over Voltage Protector, 4.5V, 6.5s Delay, 3 Cell, 3V to 25V, WSON-6
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOIC Tube
Dual Differential Comparator
The TPA3001D1PWPRG4 is a mono Class-D audio power amplifier from Texas Instruments delivering 20W output power at 36dB gain with 20kHz bandwidth. It integrates a single-channel speaker driver in a 24-pin HTSSOP package with an exposed thermal pad, making it ideal for portable and home audio systems requiring efficient, high-power mono audio amplification.
Analog to Digital Converters - ADC 12Bit 66kSPS Ser Out Prog MSB/LSB First
Operational Amplifiers - Op Amps Lo-Noise JFET-Input Gen-Purp Op Amp
Sensor Interface IO-Link Device Transceivers With Integrated Surge Protection 10-VSON -40 to 125
Buffers & Line Drivers 16-Bit Buffer/Driver With 3-State Outputs
Processor Supervisor 1.25V/2.93V 2.5V/3V/3.3V/5V 8-Pin HVSSOP EP Tube
LDO Regulator Pos 3V 0.05A 5-Pin SC-70 T/R
Switching Voltage Regulators 1.5V Out/1.2A Hi-Eff Step-Down Converter
SN74AHC16541DLG4 is a 16-bit octal buffer and line driver from Texas Instruments in a 48-pin SSOP package. Features dual active-low output enables and supports 3.3 V operation. Available from stock worldwide with fast shipping.
Buffers & Line Drivers Octal Buffer/Driver With 3-State Outputs
Analog Comparators Dual Differential Comparator
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote