Integrated Circuit

Quad D-type flip-flop with synchronous reset, complementary outputs, 24 mA output drive, and 50 pF load capability in the AC logic family, housed in a 16-pin SOIC package. RoHS-compliant and available from stock worldwide with fast shipping.

Low-Voltage High-Speed Quadruple Differential Line Receiver

The PQ25886RGET is a standalone 2-cell boost-mode battery charger from Texas Instruments supporting 2 A charge current from a USB input with adjustable threshold control. It integrates a heat-sink slug in a 24-pin QFN package for efficient thermal management. Available from stock worldwide with fast shipping.

Octal Line Driver/MOS Driver with 3-State Outputs

The CD4502BM96 is a CMOS strobed hex inverter and buffer with three-state outputs from Texas Instruments in the 4000-series logic family. It features active-low enable control, common inhibit for all 6 channels, and 50 pF load capacitance in a 16-pin SOIC package. Available with worldwide shipping.

Voltage output high-side measurement current shunt monitor

INA240PMPWTPSEP is a zero-drift, voltage-feedback current-sense amplifier supporting common-mode voltages up to 80 V on low or high-side configurations. It achieves a minimum 120 dB common-mode rejection ratio and 25 µV maximum input offset, with enhanced PWM rejection for motor-drive systems. Packaged in Space Enhanced Plastic SOIC, it targets space-grade power monitoring and industrial motor control.

Radiation hardened supply-voltage supervisor in Space Enhanced Plastic

40V,low-/high-side, zero-drift, voltage output CSA w/low bias current & enable in WCSP package

40V, bi-directional, low-/high-side, zero-drift, voltage output CSA w/low bias current and enable

Texas Instruments PTLV9102IPWR is a low-power, rail-to-rail input/output operational amplifier with a 1 MHz gain-bandwidth product and a 16 V supply range, offering 110 dB typical CMRR and 1750 µV maximum offset voltage. Available in an SOIC-8 package for space-constrained analog signal conditioning designs.

45-W, 2.1-MHz Digital input 4-channel automotive class-D audio amplifier

Texas Instruments XA1243FPBGABL is a high-performance integrated circuit in a 161-ball FCBGA package designed for advanced signal processing and communication applications. Provides dense integration with 161 pins enabling high I/O bandwidth in compact board footprint. Available in stock with worldwide shipping.

The PLM2904BQDRQ1 is an automotive-grade dual op-amp from Texas Instruments with 96 dB CMRR, 50 nA max bias current, and 4 mV max offset in an 8-pin SOIC package. It is AEC-Q100 qualified for harsh automotive environments. Available in stock with worldwide shipping.

PS7B8250QDRVRQ1 is an automotive-grade 300 mA high-voltage ultra-low-IQ LDO linear regulator by Texas Instruments in a 6-pin SON package. It supports input voltages from 6 V to 40 V with a maximum dropout voltage of 1 V and 0.01% line regulation. Suitable for automotive body electronics, always-on keep-alive circuits, and battery-management systems.

XCC3235MODSF12MOBR is a Texas Instruments SimpleLink Wi-Fi CERTIFIED dual-band wireless module supporting IEEE 802.11a/b/g/n on both 2.4 GHz and 5 GHz bands. The certified module integrates an onboard antenna, RF front-end, and Wi-Fi subsystem to simplify design. Targeted at IoT, industrial connectivity, and smart home applications requiring certified dual-band wireless connectivity.

Four-port USB 3.2 x1 Gen1 hub with USB billboard

Automotive 60-V, 5-µA IQ, 100-mA low-dropout (LDO) voltage regulator with enable and power good

32-Bit Digital Signal Controller with Flash

Single Supply-Voltage Supervisor

1.5-A Low-Noise Fast-Transient-Response Low-Dropout Regulator

10-Bit, 28 MSPS 1-Channel AFE for CCD Sensors

TLV2450IDBVT is a single-channel micropower rail-to-rail input and output operational amplifier from Texas Instruments with integrated shutdown function in a 6-pin SOT-23 package. It features 70 dB minimum common-mode rejection ratio, 5 nA typical bias current, and unity-gain stable voltage-feedback architecture. Designed for portable and battery-powered signal conditioning circuits requiring ultra-low quiescent current.

Advanced LinCMOS™ Rail-To-Rail Quad Operational Amplifier

Use the download button to access the TLC27L1AID schematic symbol, PCB footprint, and 3D model.

SOP-14

Ultra-Low Power MSP430 1.8V Split-Rail I/O

SOP, SOP20,.3

8-Bit FET Bus Switch 2.5-V/3.3-V Low-Voltage High-Bandwidth Bus Switch

Texas Instruments CD74AC251M96 is an 8-input digital multiplexer with 3-state outputs in a 16-pin SOIC package. It belongs to the AC logic family, handles up to 50 pF load capacitance, and delivers 24 mA sink current for robust bus driving.

Automotive Catalog Dual LVDS Transceiver

Precision micropower shunt voltage reference

16-Bit Ultra-Low-Power Microcontroller, 92KB Flash, 4KB RAM, 12 Bit ADC, 2 USCIs, HW Multiplier

MSP430G2x33, MSP430G2x03 Mixed Signal Microcontroller

MSP430G2x52, MSP430G2x12 Mixed Signal Microcontroller

3.3-V to 5-V RS-485 transceiver with surge protection

Use the download button to access the LM385BPW-1-2 schematic symbol, PCB footprint, and 3D model.

Precision quad differential comparator, commercial grade

9-Bit Bus Interface Flip-Flops with 3-State Outputs

1080p Dual FPD-Link III Deserializer

Octal Line Driver/MOS Driver with 3-State Outputs

4.5V to 20V Input, 3.3V 3A Synchronous Step-Down SWIFT™ Converter w/ Low-Side Gate Driver

Texas Instruments PDRV8350HRTV is a 100V three-phase smart gate driver in QFN-32 package, supporting differential input, high-side drive, and half-bridge MOSFET configurations. From $5.00 in stock, worldwide shipping.

14-Bit, Dual, Low Power, Ultra-low Glitch, Buffered Voltage Output DAC with 2.5V, 4ppm/°C Reference

Single 2-Input Positive-NAND Gate

12-Bit 10us Serial CMOS Sampling Analog-to-Digital Converter

Single Inverter Gate

Enhanced Product 1394B Ohci-Lynx Controller

Texas Instruments PCAXC8T245QPWRQ1 is an automotive-qualified 8-bit dual-supply bus transceiver with configurable voltage translation and 3-state outputs in a 24-pin SOIC package. It supports bidirectional level shifting between two independently powered logic domains and is AEC-Q100 qualified for use in harsh automotive environments. Available from stock worldwide with fast shipping.

Current-Mode PWM Controller