Integrated Circuit

PTLV9302IPWR is a single-supply, rail-to-rail output operational amplifier from Texas Instruments, featuring a 1 MHz gain-bandwidth product and a 40 V maximum supply voltage. It delivers a minimum CMRR of 95 dB and an input offset voltage of up to 2750 µV, making it suitable for cost-sensitive signal-conditioning systems. Packaged in an 8-pin TSSOP, it serves MUX-friendly analog front-end and sensor interface circuits.

Texas Instruments ISO7761QDWQ1 is an automotive-grade, 6-channel high-speed digital isolator with robust EMC performance rated for 2.25 V to 5.5 V dual-supply operation in a 16-pin SOIC package. It achieves up to 150 Mbps data rate with 4 kV isolation barrier. Designed for EV inverters, industrial motor drives, and safety-critical control interfaces.

Load Share Controller

4-CH LCD Bias w/ Fully Int. Pos. Charge Pump, 3.3V LDO Contr., 0.96A Min. Boost Ilim & Fault Detect

Piccolo™ 32-bit MCU with 90 MHz, FPU, 256 KB Flash

2-A Low-Dropout Voltage Regulators with Power Good

2.5V to 18V High Efficiency Power-Limiting Hot-Swap Controller

Use the download button to access the TLC5946RHBT schematic symbol, PCB footprint, and 3D model.

16-Channel, 12-bit PWM LED Driver with 6-Bit Dot Correction

The TMS320VC5402GGU100 is a 16-bit fixed-point digital signal processor with a 20 MHz clock, 20-bit address bus, 16-bit external data bus, and barrel shifter, supporting 3.3 V operation and JTAG boundary scan in a BGA package.

2.8-W/Ch Stereo Class-D Audio Amplifier with Easy SmartGainTM AGC/DRC (TPA2017)

Use the download button to access the TLK111PT schematic symbol, PCB footprint, and 3D model.

Hex inverters with open collector outputs

2.5 to 38 V bipolar output Hall effect sensor family

160MHz, Fully Differential Input/Output High Slew Rate Amplifier

High-Output RS-485 Transceiver

Dual High-Voltage, High-Current Peripheral Drivers

Quadruple 2-Line To1-Line Data Selector / Multiplexer

Automotive Catalog Dual 4-Line To 1-Line Data Selectors/Multiplexers With 3-State Outputs

Single 2-Input Positive-NOR Gate

Use the download button to access the TLV2444AID schematic symbol, PCB footprint, and 3D model.

Octal Edge-Triggered D-Type Flip-Flops With Clear

Use the download button to access the SN74AHC139PW schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN74F126N schematic symbol, PCB footprint, and 3D model.

Quadruple RS-485 Differential Line Receivers

MSP430F2617TZQW is a 16-bit ultra-low-power MSP430 microcontroller with 92 KB flash, 8 KB RAM, a 12-bit ADC, dual DAC channels, DMA, and two USCI serial interfaces, operating at up to 16 MHz from as low as 1.8 V supply in a BGA package. Its multiple low-power modes and hardware multiplier enable energy-efficient signal processing in battery-operated designs. Ideal for portable medical instruments, utility metering, wireless sensor nodes, and industrial data acquisition systems.

5-V Multichannel RS-232 Line Driver/Receiver With +/-15-kV ESD Protection

Use the download button to access the SN65MLVD047PW schematic symbol, PCB footprint, and 3D model.

CD74ACT02E is a quad 2-input NOR gate IC from Texas Instruments, part of the high-speed ACT CMOS logic family with 50 pF load capacitance and 24 mA sink current. It is housed in a 14-pin DIP package for easy through-hole assembly. Available in stock worldwide at competitive prices with fast shipping.

4-bit dual-supply bus transceiver

Use the download button to access the BQ24314CDSGR schematic symbol, PCB footprint, and 3D model.

I2C Controlled 6A Three-Level Switch Mode Single-Cell Charger

Adjustable, 800-mA, 10V Vin, Enhanced LBI, Step-Down Converter in MSOP-10

The PTLV9051SIDBVR is a single-channel rail-to-rail input/output operational amplifier with 5 MHz bandwidth and 15 V/µs slew rate in a compact SOT-23-6 package. It features a 62 dB minimum CMRR, 2000 µV max input offset voltage, and voltage-feedback architecture. Designed for precision signal conditioning, active filtering, and portable consumer electronics operating from low-voltage supplies.

Use the download button to access the INA191A3IYFDR schematic symbol, PCB footprint, and 3D model.

Voltage output high-side measurement current shunt monitor

AEC-Q100, 26V, bi-directional, low-/high-side, voltage output current sense amplifier

Use the download button to access the INA191A2IYFDR schematic symbol, PCB footprint, and 3D model.

3.3-V differential transceiver

Use the download button to access the TMS320LF2402APGA schematic symbol, PCB footprint, and 3D model.

Texas Instruments PTLV75801PDBVR is an adjustable 500 mA low-dropout regulator with 0.72 V nominal dropout voltage and single output, housed in a compact SOT-23-5 package. Available from stock with worldwide shipping.

16-Bit Ultra-Low-Power Microcontroller, 60KB Flash, 2.5KB RAM, 3 Sigma-Delta ADCs, LCD Driver

The PCAXC1T45QDCKRQ1 is an automotive-grade single-bit dual-supply bidirectional bus transceiver from Texas Instruments, supporting level translation with 15 pF load capacitance and 12 mA output current. It is AEC-Q100 qualified, housed in a compact 6-pin SOT-23 package. From $0.60 in stock with worldwide shipping.

3MHz, 1.6A Step-Down Converter in 2x2mm SON Package, Vout=1.8V

1.5A/2.5A, reinforced isolation dual-channel gate driver

500-mA low-IQ ultra-low-dropout (LDO) (130 mV at 500 mA) linear regulator

XI6843QGABL is a single-chip intelligent mmWave radar sensor operating from 60 GHz to 64 GHz with integrated DSP processing, transmit and receive RF front-end, and on-chip signal processing capability. It supports FMCW radar modulation, targets industrial people-counting, gesture recognition, and proximity detection applications in a compact BGA package.

Digital Control Compatible Synchronous-Buck Gate Driver with Current Sense and Fault Protection

1.875-V Output, 300-mA, 95% Efficient Step-Down Converter in SOT-23

300-MHz to 4-GHz Quadrature Modulator