Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 53,401–53,450 of 77,666
LED Display Drivers 16Ch,12B PWM LED Driver
Battery Management Li-Ion Linear Charge Management IC
Digital Bus Switch ICs ABT Octal Edge-Trig D-Type F-F
Operational Amplifiers - Op Amps 550-uA/Ch 3-MHz RRIO Op Amp w/Shutdown
Logic Gates Hi-Sp CMOS Quad 2-In Exclusive-OR Gates
4-Channel Quad ADC Pipelined 50Msps 14-bit Serial LVDS 56-Pin VQFN EP T/R
Use the download button to access the SN74AHCT373NSR schematic symbol, PCB footprint, and 3D model.
The PDAC80501MDQFT is a true 16-bit, single-channel voltage-output DAC from Texas Instruments in an 8-pin SON package, featuring dual SPI/I2C interfaces and a precision internal reference with 0.0015% maximum linearity error.
The CD74HC86EE4 is a high-speed CMOS quad 2-input exclusive-OR (XOR) gate IC from Texas Instruments in the HC logic family. It provides four independent XOR functions with a 50pF load capacitance rating and 2V to 6V wide supply range in a through-hole 14-pin PDIP package. Available from stock worldwide with competitive pricing.
3.3-V to 5-V RS-485 transceiver with ±18-kV IEC ESD protection
The Texas Instruments PTPS3840DL27DBVR is a nanopower voltage supervisor with manual reset and programmable reset time delay in a compact 5-pin SOT-23 package. It supports a single supervisory channel with high input voltage handling and fixed threshold monitoring. Available from stock worldwide with competitive pricing and fast shipping.
BiCMOS Low-Power Current Mode PWM Controller
Texas Instruments PS7B8233QDRVRQ1 is an automotive-grade, ultra-low quiescent current LDO linear regulator delivering 300 mA from a 6.25 V to 40 V input in a 6-pin SON package. It achieves 0.01% maximum line regulation and a 1.2 V maximum dropout voltage for stable always-on supply rails. Available from stock worldwide with fast shipping.
Texas Instruments PTLV9054IDR is a high-performance rail-to-rail input/output operational amplifier with 5 MHz bandwidth and 15 V/µs slew rate. It features a minimum common-mode rejection ratio of 62 dB and maximum input offset voltage of 2000 µV. Packaged in a small-outline SOIC for compact analog signal processing circuits.
1.2-V Output, 400-mA, 95% Efficient Step-Down Converter, 15uA, ThinSOT-23
Low-Power Current-Mode Push-Pull PWM
The PDRV8343HPHPRQ1 is an AEC-Q100-qualified automotive 3-phase smart gate driver IC capable of operating up to 60 V, designed to drive external N-channel MOSFETs for brushless DC motor control. It comes in a 48-pin HTQFP package with integrated protection features, targeting electric power steering, pumps, and BLDC motor applications in vehicles.
The TPS7433DR is a fixed-output low-dropout (LDO) linear voltage regulator with an input voltage range of 3.714V to 7V and a typical dropout voltage of only 180 mV. It is housed in a compact 8-pin SOIC package for space-efficient power management. Available from stock with worldwide shipping.
60V, 6A Power Limiting eFuse
TLV320DAC23IPW is a low-power stereo audio DAC with an integrated headphone amplifier, offering 16-bit to 32-bit serial input, 8 kHz to 96 kHz sample rates, and 3.3 V single-supply operation in a 28-pin TSSOP package for portable audio applications.
2.25V-5.5V, 600 kHz, Synchronous Buck Controller, Source/ Sink, Prebias Operation
Dual Synchronous, Step-Down Controller with 5-V and 3.3-V LDOs
Quad Precision Single Supply uPower Operational Amplifier
The TLV431BCDCKT is a 0.5% accuracy low-voltage adjustable precision shunt regulator from Texas Instruments. It features an adjustable output voltage range from 1.24V to 6V with tight tolerance. Available in compact SOT-23 6-pin package, from $0.20 in stock with worldwide shipping.
Use the download button to access the TL441CN schematic symbol, PCB footprint, and 3D model.
10-Bit, 40 MSPS 1-Channel AFE for CCD Sensors
14-bit, 5V, 200KSPS, 8-Channel Unipolar ADC
Adjustable precision shunt regulator
Hex Inverters With Open-Drain Outputs
JFET-Input High-Output-Drive uPower Operational Amplifier
Octal Buffers/Drivers With 3-State Outputs
Quadruple D-Type Flip-Flops With Clear
180-MHz High Output Drive Voltage-Feedback Amplifier
Embedded Test-Bus Controllers IEEE STD 1149.1 (JTAG) TAP Masters W/ 8-Bit Generic Host Interfaces
12-Bit Asynchronous Binary Counter
Hex D-Type Flip-Flops With Clear
Dual FET Bus Switch
Octal Buffers/Drivers With 3-State Outputs
Octal Buffers/Drivers With 3-State Outputs
315W-stereo / 600W-mono ultra-HD analog-input automotive class-D amplifier
Remote 8-Bit I2C and Low-Power I/O Expander With Interrupt Output and Configuration Registers
Adjustable precision micropower shunt voltage reference with 0.2% accuracy
XTPS56C230RJET is a 21 pins power management ic by Texas Instruments. Key specs: 21 pins, Quad Flat No-Lead package, 4.5-V to 18-V, 12-A synchronous buck converter. From quote-based sourcing, in stock checks support worldwide shipping.
Use the download button to access the LT1030CD schematic symbol, PCB footprint, and 3D model.
MSP430G2x33, MSP430G2x03 Mixed Signal Microcontroller
Quad Differential Comparator, Enhanced Voltage
Micropower Integrated Precision Voltage Reference
16-Bit Buffers/Drivers with 3-State Outputs
The CD74HC368E is a hex inverting tri-state buffer and bus driver in the high-speed CMOS HC family from Texas Instruments. It provides six active-low enabled inverting buffers with 50pF load drive capability in a through-hole 16-pin PDIP package. Available from authorized distributors with worldwide shipping.
Octal Buffers and Line Drivers with 3-State Outputs
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote