Texas Instruments

50/30/100-Mhz Presettable Decade OR Binary Counters/Latches

Military 4-ch, 2-input, 4.5-V to 5.5-V bipolar NOR gates

Dual Monostable Multivibrators With Schmitt-trigger Inputs

Monostable Multi-vibrator Retriggerable Monostable Multi-vibrators 16-CDIP -55 to 125

Decoder/Driver Single 4-to-10 16-Pin CDIP Tube

Voltage References 3-V, low-drift, low-power, small-footprint series voltage reference

The TI MSP430F677x1 family of polyphase metering SoCs are powerful highly integrated solutions for revenue meters that offer accuracy and low system cost with few external components. The F677x1 family of devices uses the low-power MSP430 CPU with a 32-bit multiplier to perform all energy calculations, metering applications such as tariff rate management, and communications with AMR and AMI modules

DIP-14

9-Bit Odd/Even Parity Generators/Checkers

MSP430 CPUXV2 series Microcontroller IC 16-Bit 16MHz 64KB (64K x 8) FRAM 64-LQFP (10x10)

LVDS Interface IC 9-channel bus LVDS transceiver with boundary SCAN 64-LQFP -40 to 85

Monostable Multi-vibrator Monostable Multi-vibrators With Schmitt-trigger Inputs 14-CDIP -55 to 125

Buffers & Line Drivers Military 6-ch, 4.5-V to 5.5-V bipolar buffers with open-collector outputs 14-CDIP -55 to 125

Use the download button to access the SCAN92LV090SLC/NOPB schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SNJ5404J schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SNJ5406J schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN5401J schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SNJ5400J schematic symbol, PCB footprint, and 3D model.

The SM74101SDX/NOPB is a single-channel MOSFET gate driver capable of 3 A source and 7 A sink peak output currents, designed for split-supply operation with a dedicated input ground reference. It features a Schmitt-trigger input for noise-immune PWM signal acceptance and a totem-pole output stage for fast gate charge and discharge. Housed in a 6-pin SOT-23-style no-lead package, it drives power MOSFETs and IGBTs in DC-DC converters, motor drivers, and synchronous rectifier circuits.

Dual, Low-Distortion High-Speed Rail-to-Rail Output Operational Amplifiers

The TI MSP430F677x1 family of polyphase metering SoCs are powerful highly integrated solutions for revenue meters that offer accuracy and low system cost with few external components. The F677x1 family of devices uses the low-power MSP430 CPU with a 32-bit multiplier to perform all energy calculations, metering applications such as tariff rate management, and communications with AMR and AMI modules.

SM73308MGX/NOPB is a low-offset, low-noise rail-to-rail output operational amplifier from Texas Instruments, featuring 90 dB typical CMRR, 100 nA maximum input bias current, voltage-feedback architecture, and 5-pin SOT-23 packaging for precision signal conditioning and sensor amplification.

Voltage References 5-V, low-drift, low-power, small-footprint series voltage reference

SM72485SDX/NOPB is a 100 V, 150 mA constant on-time current-mode buck switching regulator in an 8-pin WSON package, accepting a 6 V to 95 V input for industrial and solar applications. It delivers an adjustable output voltage from 2.5 V and operates across -40°C to 125°C, targeting high-voltage bias supply and photovoltaic system power management.

Texas Instruments SG3524NS is a voltage-mode PWM regulating pulse-width modulator IC in a 16-pin SOIC package supporting input voltages from 8 V to 40 V. It controls switching power supply topologies including push-pull, half-bridge, and full-bridge converters for industrial power and DC-DC regulation designs.

SM72480SDE-125/NOPB is a SolarMagic series temperature switch IC operating from a 1.6 V supply with ±2.3°C maximum accuracy and a maximum operating current of 0.016 mA, housed in a compact 6-pin LLP package measuring 2.5 mm x 2.2 mm x 0.8 mm. It includes short-circuit protection and is surface-mount compatible for high-density board designs. Designed for thermal protection and temperature monitoring in solar energy panel management and low-power sensing applications.

16-bit Microcontrollers - MCU 16 MHz MCU with 64KB FRAM, 2KB SRAM, LCD, AES, 12-bit ADC , comparator, DMA, UART/SPI/I2C, timer 64-VQFN -40 to 85

Use the download button to access the SCAN921260UJB/NOPB schematic symbol, PCB footprint, and 3D model.

SCAN921226SLC/NOPB is a differential line receiver IC with programmable edge-trigger clock and IEEE 1149.1 JTAG boundary-scan support in a 49-ball BGA package. It features a differential Schmitt-trigger input with 0.2 V minimum output swing, targeting high-speed clock distribution and testable digital backplane interconnects.

Serializers & Deserializers - Serdes 10-Bit Deserializer

HVQCCN-20

MSP430 CPUXV2 series Microcontroller IC 16-Bit 16MHz 64KB (64K x 8) FRAM 64-LQFP (10x10)

ARM Microcontrollers - MCU 16/32-Bit RISC Flash Microcontroller 144-LQFP -40 to 105

ARM® Cortex®-R4F series Microcontroller IC 16/32-Bit 200MHz 1.25MB (1.25M x 8) FLASH 144-LQFP (20x20)

Texas Instruments RC4580IDR-NF is a dual, high-output-drive op amp with 8 MHz gain-bandwidth product, operating from 2.5 V to 16 V single supply or plus/minus 8 V dual supply. Available in SOIC-8 package for audio and general-purpose amplifier applications.

Use the download button to access the REF3440TIDBVR schematic symbol, PCB footprint, and 3D model.

Series Voltage Reference IC Fixed 4.096V V ±0.2% 10 mA SOT-23-6

Single-phase metering SoC with 2 Sigma-Delta ADCs, LCD, real-time clock, 96KB Flash, 4KB RAM

Voltage References 2.5-V, low-drift, low-power, small-footprint series voltage reference

TEXAS INSTRUMENTS - PGA206PA - Instrument Amplifier, 3 Amplifier, 2.5 mV, 25 V/µs, 5 MHz, ± 4.5V to ± 18V, DIP

Texas Instruments RC4580IPWR-J is a dual rail-to-rail output audio op-amp optimized for low-voltage, low-noise audio applications in an 8-pin TSSOP package with ±2.5 V to ±15 V supply range. Available from stock with worldwide shipping.

Use the download button to access the PCMD3180IRTWT schematic symbol, PCB footprint, and 3D model.

Analog to Digital Converters - ADC Four-channel PDM-input to TDM- or I S-output converter

HVQCCN-20

The PTPS65917ATRGZRQ1 is an AEC-Q100 qualified power management unit from Texas Instruments designed for automotive processor platforms, integrating multiple DC-DC converters and LDO regulators with I2C control. It delivers programmable output voltages down to 0.9 V and supports sequenced power-up and power-down rails. Available from stock with worldwide shipping.

The POPA145IDBVR is a single-channel JFET-input operational amplifier from Texas Instruments in a compact 5-pin SOT-23 package. It features very low input bias current typical of JFET architectures, suitable for high-impedance sensor interfaces operating at low supply voltages. The tiny SOT-23-5 form factor supports space-constrained portable and wearable analog front-end designs.

The PLL1705S1DBQR is a multi-output audio PLL clock generator from Texas Instruments that synthesizes standard audio sample-rate clocks at 256xFs and 384xFs from a 27 MHz crystal reference. It supports 32 kHz, 44.1 kHz, and 48 kHz sample rates with low jitter output in a compact SOP package. Ideal for digital audio systems including DACs, ADCs, and audio codecs in consumer and professional equipment.

peu

Operational Amplifiers - Op Amps Low power, precision, 50 MHz decompensated CMOS operational amplifier for cost sensitive systems 5-SOT-23 -40 to 125

Audio A/D Converter ICs Automotive 6-ch audio ADC with integrated programmable mic bias, boost and input diagnostics 32-WQFN -40 to 125