Texas Instruments

Octal Transparent D-Type Latches With 3-State Outputs

LM1815N/NOPB is a Texas Instruments adaptive peak detector IC for magnetic sensor signal processing. It features a single-channel design in a 14-pin DIP package with automatic gain control. From $3.75, in stock with worldwide shipping.

DRV11873PWPR is a 3-phase sensorless BLDC motor driver IC from Texas Instruments, featuring 16V/1.5A output, integrated gate drivers, and back-EMF sensing in a 16-pin HTSSOP package. From $0.43 in stock with worldwide shipping.

The LMD18245T/NOPB is a 3A 55V full-bridge PWM motor driver by Texas Instruments in a TO-220 package. Starting at $24.00/unit (1 pc), in stock, ships globally, min order 1 pc.

DRV8850RGYR is a half-bridge brushed DC motor controller from Texas Instruments. It supports up to 9.5A output current with integrated protection features. From $0.88 in stock with worldwide shipping.

RFID Transponders NFC Type-4 Compliant Tag

Low Jitter, 1:8 LVCMOS Fan-out Clock Buffer

CDCLVC1106PWR is a low-jitter 1:6 LVCMOS fanout clock buffer from Texas Instruments. It features low skew clock distribution with standard input conditioning and 12mA output drive. From $1.746, in stock worldwide shipping.

Low Jitter, 1:4 LVCMOS Fan-out Clock Buffer

Low Jitter, 1:3 LVCMOS Fan-out Clock Buffer

Low Jitter, 1:2 LVCMOS Fan-out Clock Buffer

SN74ALS259D is an 8-bit addressable latch IC from Texas Instruments, featuring 1:8 demultiplexer followed by D-type latches with active-low reset. Supports 50 pF load capacitance and 8 mA output current. From $1.80, in stock with worldwide shipping.

TPS82697SIP is a high-efficiency MicroSIP step-down converter with 2.3V–4.8V input range, voltage-mode PWM control, and ultra-low 1mm profile. From $0.9, in stock worldwide shipping.

TMCS1100A2QDR is a Hall-effect current sensor supporting ±50A, 200mV/A sensitivity, 5V supply, SOT-23-6 package, from $1.69 in qty 5000, in-stock, ships from 1 piece.

LVDS Interface IC Hi-Spd Diff

Board Mount Hall Effect / Magnetic Sensors Low power (5 Hz, <1uA), low voltage (up to 5.5V) switch 3-TO-92 -40 to 85

Supervisory Circuits Nanopower high-input voltage supervisor with manual reset and programmable-reset time delay

TPD4S012DRYR is a 4-channel TVS diode array from Texas Instruments for ESD protection. Features 9V clamping voltage, 20V minimum breakdown voltage, and silicon diode elements in a compact 6-pin package. From $0.212 in stock with worldwide shipping.

LDO Voltage Regulators Automotive 150-mA, off-battery (40-V), ultra-low-IQ, low-dropout voltage regulator with enable 5-TO-252 -40 to 150

TLV6742IDSGR is a dual, 10-MHz, low-noise, low-power rail-to-rail output operational amplifier from Texas Instruments. It features a 3.2 nV/Hz input noise voltage, 2.5 uA per channel supply current, and operates from 1.8 V to 5.5 V supply. Available in a compact DSG package, in stock worldwide with fast shipping.

AUTOMOTIVE 3-V TO 36-V, 3.5-A, L

UCC5304DWVR is a single-channel reinforced isolation gate driver with 4-A source and 6-A sink current, featuring Schmitt trigger input and high noise immunity. Housed in 8-SOIC package, rated -40 to 125°C. From $1.35 in stock, worldwide shipping.

UCC256402ADDBT is a current-mode LLC resonant controller with ultra-low standby power, high-voltage startup, and integrated protection features. Supports 13–30V input, 14-SOIC package, –40 to 125°C. From $1.56, in stock, worldwide shipping.

LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

LM61440AANRJRR is a 40V 4A synchronous buck regulator by Texas Instruments in WQFN-HR package, quiescent current 60µA, from $2.49/250pcs, in stock, ships globally.

TPS7A0330PDBVR is a 200mA nanopower LDO voltage regulator with 200nA quiescent current and 3.3V fixed output. Features ultra-low dropout of 205mV, wide input range of 3.5V to 6V, and enable pin for power management. From $0.20 in stock with worldwide shipping.

Switching Voltage Regulators Automotive 2.75-V to 6-V, 2-A step-down converter in a 2mm x 3mm wettable-flanks QFN package 9-VQFN-HR -40 to 125

Use the download button to access the TCAN1044VDDFRQ1 schematic symbol, PCB footprint, and 3D model.

TL16C750EPFBR is a single UART IC with 128-byte FIFOs and automatic hardware flow control, supporting 2.5V/3.3V/5V operation at up to 48MHz clock frequency. From $5.82, in stock with worldwide shipping.

DAC 1-CH R-2R 20-bit 48-Pin TQFP T/R DACx1001 20-Bit, 18-Bit, and 16-Bit, Low-Noise, Ultra-Low Harmonic Distortion, FastSettling, High-Voltage Output, Digital-to-Analog Converters (DACs)

Use the download button to access the OPA990IDBVR schematic symbol, PCB footprint, and 3D model.

LM385M3-1.2/NOPB is a 1.235V micropower voltage reference by Texas Instruments in SOT-23-3 package, operating from 20µA, -40°C to 85°C. In stock from $0.84, MOQ 1, ships worldwide.

Motor / Motion / Ignition Controllers & Drivers Automotive 12 channel half bridge motor driver 24-HTSSOP -40 to 125

LP3470A263DBVR is an ultra-low-power active-low voltage supervisor IC with programmable reset delay and 1% reset threshold accuracy. Features single-channel monitoring in a compact SOT-23-5 package. From $0.84 in stock, worldwide shipping.

TPS92613QNDRRQ1 is a single-channel LED display driver IC with 3-segment multiplexed drive capability, AEC-Q100 automotive-grade qualification, and 25 parametric specs. From $0.688, in stock with worldwide shipping.

LM63615DQPWPRQ1 is an automotive-grade 1.5A synchronous step-down switching regulator with 3.5V–36V input range, current-mode PWM/PFM control, and 5V output. From $1.87, in stock, worldwide shipping.

PLMR36506RRPET is a 6 A synchronous buck converter by Texas Instruments with 3.8 V to 36 V input range and up to 2 MHz switching frequency. Key specs: 65 µA quiescent current at light load, −40 °C to 125 °C operating temperature, 20-VQFN 3.5 mm × 3.5 mm package. In stock with worldwide shipping.

The UCC256403DDBR is a Texas Instruments active clamp flyback (ACF) controller in a 10-pin WSON package. It enables zero-voltage switching (ZVS) for isolated DC/DC supplies, supports -40°C to 125°C operation, and starts from $2.43/unit with global shipping available.

Use the download button to access the LM2596T-12/NOPB schematic symbol, PCB footprint, and 3D model.

LM3402MM/NOPB is a 42V, 0.5A constant-current buck regulator for high-power LED driving by Texas Instruments. Key specs: 42V input voltage, 0.5A LED current, 200kHz–1MHz switching frequency. From $1.10, in stock with worldwide shipping.

Use the download button to access the TLV1117-33IKVURG3 schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - LM2904MX/NOPB - Operational Amplifier, Dual, 2 Amplifier, 1 MHz, 0.1 V/µs, ± 1.5V to ± 16V, SOIC, 8 Pins

TRS3232EIDR is a dual RS-232 transceiver IC by Texas Instruments, operating from a 3.3V supply with ±15kV ESD protection and up to 120kbps data rate. Key specs: 2 drivers, 2 receivers, 3.3V supply, -40°C to 85°C industrial temperature range. From $0.73, in stock with worldwide shipping.

Texas Instruments REG1117-3.3/2K5 is a 1A 3.3V LDO linear regulator in SOT-223, tape & reel 2500 pcs. From $1.35/pc, in stock, ships globally, MOQ 1.

LM2575T-5.0/NOPB is a 1A fixed 5V step-down (buck) switching voltage regulator by Texas Instruments. Key specs: 5V output, 1A load current, 52kHz switching frequency, TO-220-5 package. From $1.46, in stock with worldwide shipping.

Current Sense Amplifiers 26V current sense amplifier with integrated over-current comparator for cost-sensitive applications 10-VSSOP -40 to 125

Gate Drivers Automotive, single channel isolated gate driver for SiC/IGBT with advanced protection and high-CMTI 16-SOIC -40 to 125

Use the download button to access the DRV103U schematic symbol, PCB footprint, and 3D model.

LM2940IMP-9.0/NOPB is a 1A 9V LDO voltage regulator in SOT-223 package, rated -40 to +125C, RoHS compliant, from $0.43, in-stock, 1 piece minimum order, ships worldwide.