Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
41,374
Total Products
125
Categories
All Texas Instruments Components
Showing 351–400 of 41,374
2.7V to 18V, 4A, 34mΩ eFuse With Fast Overvoltage Protection
Inverters Low-Voltage Dual Mltplxr/Demltplxr
18-Bit, 100-kSPS, Serial Interface, microPower, Miniature, Truly-Differential Input, SAR ADC
AND Gate 1-Element 2-IN CMOS 5-Pin SC-70 T/R
Use the download button to access the LM25145RGYR schematic symbol, PCB footprint, and 3D model.
Texas Instruments SN54LS367AJ is a hex 3-state bus driver in a 16-pin DIP package, providing 6 non-inverting buffers with active-low enable control for unidirectional bus driving in TTL logic systems. It operates from a 5 V supply across the full military temperature range.
Carrier-Current Transceiver
Piccolo™ 32-bit MCU with 100 MHz, FPU, TMU, 256 KB Flash, CLA, InstaSPIN-FOC, CLB, PGAs, SDFM
Use the download button to access the LMT87LPG schematic symbol, PCB footprint, and 3D model.
2.7V to 18V, 4A, 34mΩ eFuse With Fast Overvoltage Protection
RF Amplifier 8GHz 14-UQFN -40 to 85
Data Acquisition ADCs/DACs - Specialized Small Basic Isolated Delta-Sigma Modulator With +/-50mV Input and CMOS Interface 8-SOIC -40 to 125
Use the download button to access the LMS3655MQRNLRQ1 schematic symbol and PCB footprint.
1-MHz, Low-Power Operational Amplifier for Cost-Sensitive Systems
The SN74LS190N is a synchronous up/down decade counter IC from Texas Instruments in a 16-pin PDIP package. It operates at clock frequencies up to 20 MHz, supports load and preset inputs, and includes a terminal count output for cascading. Suitable for digital clocks, frequency dividers, and industrial counting applications requiring bidirectional BCD counting.
IC DRVR CTRLR DGRL 176DLP
USB Interface IC 4-Port 12 Mbps USB Full-Speed Hub W/Optional Serial EEPROM Interface 32-LQFP -40 to 85
Single 2 Input Positive NAND Gate
Automotive, High Common-mode Rejection, Low Distortion Differential Audio Line Receiver
Dual 2:1 USB 2.0 Mux/DeMux or Single Ended Cross Switch with 20-V OVP
Use the download button to access the LM78L12ACZ/LFT4 schematic symbol, PCB footprint, and 3D model.
USB Type-C™ and USB PD Source Controller
TI REG711EA-3.3/250G4 is a 50 mA switched-capacitor DC/DC converter with 3.3 V fixed output in an 8-pin SOIC package. Accepts 1.8 V to 5.5 V input for low-power designs. Available from stock with worldwide shipping.
Low-Power Stereo CODEC with HP Amplifier
Buffer, Non-Inverting 2 Element 4 Bit per Element Push-Pull Output 20-TSSOP
120V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver
Low Power, Single-Supply, Rail-To-Rail Operational Amplifiers MicroAmplifier™ Ser
2A/2A, 3-kVRMS Single-Channel Isolated Gate Driver for Bipolar Supply (E) or With Split Output (S)
TEXAS INSTRUMENTS - OPA692IDBVTG4 - AMP, BUFFER, FIXED GAIN, SMD, SOT236
The XTHS3491IDDAR is a Texas Instruments 900 MHz high-power-output current feedback operational amplifier with 75 dB typical CMRR and 2 mV maximum input offset voltage. It integrates frequency compensation and ships in an 8-pin SOIC (R-PDSO-G8) package for compact RF and wideband signal chain designs. Available worldwide with in-stock inventory for rapid prototyping.
TPS3700QDSERQ1 is an AEC-Q100 qualified automotive-grade window comparator IC from Texas Instruments supporting 18 V maximum input with 2-channel over- and undervoltage detection. It features adjustable thresholds in a 6-pin SON Pb-free package for compact power monitoring. Available in production quantities with worldwide shipping.
Counter Shift Registers 8-Bit Parallel-Load Shift Register
Use the download button to access the ISO1212DBQ schematic symbol, PCB footprint, and 3D model.
Switching Voltage Regulators Gated-Oscillator-Based Automotive DC-DC Boost Converter 14-WSON -40 to 125
Operational Amplifiers - Op Amps Quad Lw V R/R
Use the download button to access the LMS36353QRNLTQ1 schematic symbol and PCB footprint.
LDO Voltage Regulators Sgl Output LDO 1.0A Adj
Use the download button to access the TLV76015DBZR schematic symbol, PCB footprint, and 3D model.
INST Amp Single R-R I/O 5.5V 10-Pin VSSOP T/R Precision, Rail to-Rail I/O INSTRUMENTATION AMPLIFIER
3ppm/C High-Precision Voltage Reference with Integrated High-Bandwidth Buffer
16-Bit, 4kSPS, 12-Ch Delta-Sigma ADC With PGA and Voltage Reference for Low-Cost Applications
Ultra-Low Power 1.65V to 5.5V Hall Effect Switch Sensor
6 Gbps DP++ to HDMI Retimer
PINA2181A2IDGSR is a Texas Instruments Integrated Circuit for embedded systems, signal routing, communication interfaces, and control electronics. It combines -40°C to 125°C with Small Outline Packages with 10 pins. FindMyChip supports technical sourcing, stock checks, and worldwide shipping for this part.
TEXAS INSTRUMENTS - MSP430G2744IRHA40T - MCU, 16BIT, MSP430, 16MHZ, VQFN-40
e-trim™ 20MHz, High Precision CMOS Operational Amplifier
Use the download button to access the LM5145RGYR schematic symbol, PCB footprint, and 3D model.
16-Bit High-Speed 4-Channel Simultaneous-Sampling ADC With Bipolar Inputs on a Single Supply
Use the download button to access the CSD95372AQ5M schematic symbol, PCB footprint, and 3D model.
3.5A /5.5A, 36V Synchronous, 400kHz, Step-Down Converter
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote