Texas Instruments

DS80EP100SD/NOPB is a single-channel power-saver equalizer supporting 5 Gbps to 12.5 Gbps data rates for backplane and cable signal conditioning in a 6-pin SON package.

The DS75176BTM/NOPB is an RS-485/RS-422 line transceiver with differential Schmitt trigger input, tristatable receiver, and active receiver under shutdown in an 8-pin SOIC package. Supports half-duplex EIA-485 and full-duplex EIA-422 communication with common I/O architecture. From $1.20 in stock worldwide shipping.

DS75176BM/NOPB is a Texas Instruments RS-485/RS-422 multipoint bus transceiver IC. It features a differential Schmitt trigger receiver and tristatable output, supporting EIA-485 and EIA-422 standards. From $4.27, in stock with worldwide shipping.

Low-Power RS-485/RS-422 Multipoint Transceiver

DS485TM is a low-power RS-485/RS-422 differential bus transceiver by Texas Instruments. Key specs: operates from 5V supply, supports up to 32 nodes on a single bus, half-duplex communication with ±7V bus fault protection. From $1.1, in stock with worldwide shipping.

Low-Power RS-485/RS-422 Multipoint Transceiver

Use the download button to access the DS38EP100SD/NOPB schematic symbol, PCB footprint, and 3D model.

TIA/EIA-485 Transceiver

Enhanced CMOS Quad Differential Line Driver with EIA-422-B/TIA-422-B interface standard support, 4-bit driver configuration, and SOIC-16 package. From $1.158 in stock with worldwide shipping.

DS34LV86TM is a quad differential line receiver from Texas Instruments supporting EIA-422-B/TIA-422-B standards with Schmitt trigger inputs. Features 4 receiver channels in SOIC-16 package with low output current of 6mA. From $1.47, in stock with worldwide shipping.

CMOS Quad TRI-STATE Differential Line Driver

CMOS Quad Line Driver

Quad CMOS Diff Line Receiver DS34C86TM

DS34C86TM is a quad CMOS line receiver supporting EIA-422/423 differential Schmitt trigger inputs with 4 channels in a 16-pin SOP package. From $0.45 in stock with worldwide shipping.

Quad RS-422 line driver,DS3487M 5V/2mA

Quad RS422 line receiver,DS3486M 5V/85mA

DS26LV32ATM/NOPB is a quad LVDS differential line receiver by Texas Instruments, designed for high-speed data transmission. Key specs: 400 Mbps data rate, 3.3V supply, TSSOP-16 package with fail-safe inputs. From $0.297, in stock with worldwide shipping.

DS26LV31TM/NOPB is a quad LVDS line driver by Texas Instruments, designed for low-voltage differential signaling at up to 400 Mbps. Key specs: 3.3V supply, quad channel, SOIC-16 package. From $1.47, in stock with worldwide shipping.

Quad differential line driver,DS26LV31TM

Quad RS-422 line receiver,DS26LS32CM 5V

DS26LS32ACM/NOPB is a quad differential line receiver with TIA/EIA-232 and RS-422 compatibility by Texas Instruments. Key specs: ±7V common-mode range, 5V single supply, and data rates up to 10 Mbps. From $0.63, in stock with worldwide shipping.

Quad High Speed Differential Line Drivers

CMOS Quad Differential Line Receivers

DS26C32ATM is a quad differential line receiver by Texas Instruments, designed for RS-422 and RS-485 data communication applications. Key specs: 4 differential inputs, operates from ±5V supply, supports data rates up to 20 Mbps. From $1.196, in stock with worldwide shipping.

DS26C31TM/NOPB is a CMOS quad differential line driver with TRI-STATE outputs, supporting EIA-422/RS-422 interface standard with 4-bit driver width. From $1.44, in stock worldwide shipping.

DS26C31TM is a CMOS Quad Differential Line Driver compatible with EIA-422 and EIA-423 standards, featuring 4 independent drivers with high-speed data transmission up to 20 Mbps. Ideal for RS-422 industrial communication, data acquisition, and long-distance serial interfaces. From $0.28, in stock with worldwide shipping.

SOIC-16

DS2003TM is a 7-channel Darlington transistor array in SO-16 package, featuring 500mA collector current, 55V breakdown voltage, and logic-level compatible inputs. From $1.67 in stock with worldwide shipping.

Video Equalizer (3D+C) for DVI, HDMI Source/Repeater/Sink Applications

DS16EV5110ASQE is a cable equalizer IC by Texas Instruments designed for long HDMI cable signal restoration. It features 5-channel equalization with adaptive boost up to 20dB, supports HDMI 1.4 and 3D video. From $5, in stock with worldwide shipping.

DS14C89AM/NOPB is a quad RS-232 line receiver IC from Texas Instruments featuring Schmitt trigger inputs and EIA/TIA-232-E compliance. It supports 4 independent receiver channels with 1.8V minimum output swing. From $1.28 in stock with worldwide shipping.

Quad CMOS Line Driver DS14C88M

RS-232 transceiver 3T/5R DS14C335MSA

RS232 driver/receiver,DS14C335MSAMSA

Dual RS-232 driver/receiver,DS14C232CM

Dual RS232 driver/receiver,DS14C232CM

DP83848IVV is a single-port 10/100 Mbps Fast Ethernet PHY transceiver by Texas Instruments, supporting MII/RMII interfaces, auto-negotiation, and industrial temperature range. From $1.38, in stock, worldwide shipping.

12-Bit Micro Power OCTAL Digital-to-Analog Converter with Rail-to-Rail Outputs

DAC124S085CIMM is a 12-bit, 4-channel, SPI-compatible digital-to-analog converter by Texas Instruments. Key specs: 12-bit resolution, 4 output channels, 2.7V–5.5V supply, SPI interface up to 40MHz. From $2.57, in stock with worldwide shipping.

12B 2ch DAC w/R-to-R O/P,DAC122S085CIMM

12-Bit Micro Power, RRO Digital-to-Analog Converter

DAC121S101CIMM is a 12-bit digital-to-analog converter from Texas Instruments with serial input interface and rail-to-rail output, featuring low power consumption and high linearity. From $1.67, in stock, worldwide shipping.

12-bit DAC with rail-to-rail output, SPI serial interface, 5.5V max analog output, 0.1953% max linearity error. From $1.17 in stock, worldwide shipping.

DAC121C085CIMM/NOPB is a 12-bit digital-to-analog converter (DAC) with I2C interface by Texas Instruments. Key specs: 12-bit resolution, single-channel output, low power consumption in VSSOP-8 package. From $1.34, in stock with worldwide shipping.

DAC121C081CIMK/NOPB is a 12-bit, single-channel digital-to-analog converter by Texas Instruments with I2C interface and rail-to-rail output. Key specs: 12-bit resolution, 2.7V–5.5V supply voltage, 100kHz/400kHz I2C, SOT-23-6 package. From $1.75, in stock with worldwide shipping.

10-Bit Micro Power OCTAL Digital-to-Analog Converter with Rail-to-Rail Outputs

DAC104S085CIMM is a 10-bit, 4-channel DAC with rail-to-rail output from Texas Instruments. Features serial input, 5.5V max analog output, and SPI-compatible interface for precision signal generation. From $2.40, in stock with worldwide shipping.

10B 2ch DAC w/R-to-R O/P,DAC102S085CIMM

COP8AME9EMW8 is an 8-bit CMOS microcontroller from Texas Instruments in the COP800 family with a 10 MHz maximum clock, integrated ADC, and boundary scan support. It is housed in a 28-pin SOIC package and targets low-cost embedded control applications. Available from stock with worldwide shipping.