Texas Instruments

Use the download button to access the DRV8662RGPT schematic symbol, PCB footprint, and 3D model.

DRV2700RGPR is a high voltage piezo driver IC with integrated boost converter, delivering up to 200V output, single-channel operation, in a compact QFN-20 package. From $1.78 in stock worldwide shipping.

LM385Z-1.2/NOPB is a two-terminal 1.235V micropower voltage reference from Texas Instruments. It operates from 20mA output current with ±2% accuracy in a compact TO-92 package. From $0.26 in stock with worldwide shipping.

OPA2356AIDGKR is a dual high-speed CMOS operational amplifier from Texas Instruments featuring 200MHz gain-bandwidth product, 2.5V supply voltage, and ultra-low 0.05nA bias current. Designed for precision signal processing and high-speed data acquisition applications. From $0.89, in stock, worldwide shipping.

High Speed Operational Amplifiers 2.5V 200MHz GBW CMOS Dual Op Amp

OP Amp Dual Volt Fdbk R-R O/P Texas Instruments OPA2356AID Dual Operational Amplifier Voltage Feedback, 200MHz CMOS, Rail-Rail, 3 V, 5 V, 8-Pin SOIC

Use the download button to access the OPA2356AIDGKT schematic symbol, PCB footprint, and 3D model.

CMOS Triple 3-Input NOR Gate IC with 3 independent logic functions and 3 inputs each. Supports 50 pF load capacitance, 6.8 mA output current, available in 14-pin DIP package. From $0.37 in stock worldwide shipping.

24-V, 3-Phase Sensorless BLDC Motor Controller with integrated gate drivers, 3A output current, and I2C interface for precise speed control. From $1.28 in stock worldwide shipping.

Motor / Motion / Ignition Controllers & Drivers 24-V3-Phase Sensorle BLDC Motor Controler

TEXAS INSTRUMENTS - DRV10983PWP - Motor Driver/Controller, Three Phase DC Brushless, 8V to 28V supply, 24V/2 A/3 Outputs, HTSSOP-24

TPS2560DRCT is a dual-channel precision adjustable current-limited power switch IC from Texas Instruments, supporting 2.5V to 6.5V input with accurate current limiting and fault protection. From $0.62, in stock worldwide shipping.

2.5-12V Buck-Boost Converter 2A WSON10EP Texas Instruments TPS63061DSCT, Buck/Boost Converter Buck/Boost Converter 1A, 2.5 → 8 V, 2600 kHz, 10-Pin WSON

500-mA, low-VIN (0.8-V), adjustable ultra-low-dropout voltage regulator with power good & enable

5-V, 3-Phase Sinusoidal Sensorless BLDC Motor Driver

+4.6V / -1.4 to -4.4V Dual Output 200mA AMOLED Display Pwr Supply

Motor/Motion/Ignition Controllers & Drivers

Motor / Motion / Ignition Controllers & Drivers 5-V, 3-Phase Sinusoidal Sensorless BLDC Motor Driver 10-SON -40 to 85

Motor / Motion / Ignition Controllers & Drivers Motor driver

The LM2833XSD/NOPB is a 1.5 MHz/3 MHz current-mode step-down DC-DC switching regulator delivering up to 3.0 A output current with adjustable output voltage from 0.6 V to 4.5 V. It operates from a 3 V to 5.5 V input supply and uses pulse-width modulation control for high efficiency. Available from stock with worldwide shipping.

UCC27210DPRT is a high-frequency, high-side and low-side gate driver IC by Texas Instruments, designed for driving N-channel MOSFETs and IGBTs. Key specs: 120V bootstrap voltage rating, 4A source/sink peak drive current, 3V to 5.5V input supply range. From $1.59, in stock with worldwide shipping.

UCC27201ADPRT is a 120V bootstrap, high-side/low-side gate driver with 3A peak output current, designed for high-frequency IGBT and MOSFET switching. From $1.65, in stock, worldwide shipping.

120V Boot, 4A Peak, High Frequency High-Side Low-Side Driver

800mA, Single-Input, Single Cell Li-Ion Solar Battery Charger

PFET Load Switch with Adjustable Slew Rate, Fast Transient Isolation & Hysteretic Control

The CC3200MODR1M2AMOB is a certified SimpleLink Wi-Fi and IoT module based on Texas Instruments' CC3200 single-chip wireless MCU, integrating an ARM Cortex-M4 application processor with 802.11 b/g/n Wi-Fi and a dedicated network processor. This complete module solution reduces design complexity with built-in antenna, RF front-end, and FCC/CE/IC certifications. Available from global distributors in stock with worldwide shipping for rapid IoT product development.

Use the download button to access the CC3200R1M2RGC schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - CC3200R1M1RGC - MCU, CORTEX-M4, 80MHZ, VQFN-64

SN74LV123APWT is a dual retriggerable monostable multivibrator IC with edge-triggered active-high/low gated inputs, 2-bit output, 50pF load capacitance, and 12mA output drive. From $0.21 in stock with worldwide shipping.

Dual Retriggerable Monostable Multivibrators

SN74LV123APW is a dual retriggerable monostable multivibrator (one-shot) IC by Texas Instruments, operating from 1.65V to 5.5V supply. Key specs: dual independent one-shot channels, active-low and active-high trigger inputs, external RC timing control. From $0.1972, in stock with worldwide shipping.

SN74AHCT123APWR is a dual retriggerable monostable multivibrator IC from Texas Instruments, featuring edge-triggered inputs from active-high or active-low gated logic, 2-bit configuration, 50pF load capacitance, and 8mA output current. From $0.246, in stock with worldwide shipping.

The SN74AHC123APWR is a dual retriggerable monostable multivibrator with CMOS AHC technology for industrial temperature range. It supports edge-triggered operation from active-high or active-low gated logic inputs with external RC timing. Available from stock with worldwide shipping.

High-Voltage, High-Current Darlington Transistor Array

High-Voltage, High-Current Darlington Transistor Arrays

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON TRANSISTOR ARRAYS

Texas Instruments ULN2003APW, 7-element NPN Darlington Pair, 0.5 A 50 V, 16-Pin TSSOP

Texas Instruments ULN2003AID, 7-element NPN Darlington Pair, 500 mA 50 V, 16-Pin SOIC

High-Voltage, High-Current Darlington Transistor Array

Use the download button to access the LM317AT/NOPB schematic symbol, PCB footprint, and 3D model.

14-Bit, 400-MSPS Analog-to-Digital Converter (ADC)

Use the download button to access the CSD25211W1015 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the CSD86311W1723 schematic symbol, PCB footprint, and 3D model.

1.1nV/rtHz Noise, Low-Power, Precision Operational Amplifier

Quadruple FET Bus Switch