Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
41,509
Total Products
126
Categories
All Texas Instruments Components
Showing 34,651–34,700 of 41,509
LPV542DGKT Texas Instruments, CMOS, Op Amp, RRIO, 8kHz, 8-Pin VSSOP
5.5-V, 4-A 13mΩ load switch with adjustable rise time and optional quick output discharge
36-V, Precision, RRIO, Low Offset Voltage, Low Input Bias Current Op Amp With e-trim
Nanopower, 480 nA, 1.6 V RRIO Dual, CMOS input op amp
TEXAS INSTRUMENTS - LM74610QDGKTQ1 - DIODE-OR CNTRL, 100V, VSSOP-8
Dual Bus Switch Voltage Translator
TS5A21366RSER is a 0.75-Ohm dual SPST analog switch with 1.8V-compatible logic, supporting 260MHz bandwidth and 5.5V supply. Features low on-resistance and high-speed switching for video and signal routing. From $0.29 in stock with worldwide shipping.
0.75R Dual SPST Analog Switch 1.8V VSSOP TS5A21366DCUR, Analogue Switch Dual SPST Analogue Switch, 1.65 → 5.5 V, 8-Pin, US8, 2
Single 2-Input Positive-AND Gate
Use the download button to access the TMP302BDRLR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TMP302CDRLT schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TMP302BDRLT schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TMP302ADRLT schematic symbol, PCB footprint, and 3D model.
CD74HC4515M96E4 is a integrated circuit for board-level control by Texas Instruments. Key specs: production sourcing support, inquiry-only sourcing. From inquiry pricing, in stock with worldwide shipping.
The CD74HC4515M96 is a high-speed CMOS 4-to-16 line decoder/demultiplexer with address latches from Texas Instruments. It features latched inputs with a 50 pF load capacitance rating and sinks up to 5.2 mA per output in a 24-pin SOIC package.
Texas Instruments CD74HC4515EN is a high-speed CMOS 4-to-16 line decoder/demultiplexer with integrated address latches, 50 pF load capability, and 4 mA output drive, housed in a 24-pin PDIP package. Available in stock worldwide with competitive pricing.
The CD74HC4515M is a 1-of-16 inverting decoder/demultiplexer with address latches from Texas Instruments, supporting 2 to 6 V supply and 50 pF load capacitance. It features 4-line to 16-line decoding in a 24-pin SOIC package. From $0.50 in stock with worldwide shipping.
TMS320LF2406APZA is a 16-bit fixed-point DSP microcontroller with on-chip Flash memory. It features a 20 MHz clock, 16-bit external data bus, ADC, and boundary scan support. Available in quad flat package format for embedded motor and power control applications.
Mixed Signal MCU MSP430 16K Flash TSSOP Mixed Signal MCU MSP430 16K Flash TSSOP
16-bit Ultra-Low-Power Microcontroller, 32KB Flash, 4KB RAM, 12-Bit ADC,up to 4 USCIs, HW Multiplier
36-V, Precision, RRIO, Low Offset Voltage, Low Input Bias Current Op Amp With e-trim
Use the download button to access the OPA1688ID schematic symbol, PCB footprint, and 3D model.
The TL072QDREP is an enhanced product dual JFET-input operational amplifier with ultra-low bias current of 200 pA and common-mode rejection ratio of 100 dB typical. It features internal frequency compensation and voltage-feedback architecture in an 8-pin SOIC package. Available from stock with worldwide shipping.
TL072CPWR is a dual low-noise JFET-input general-purpose operational amplifier from Texas Instruments with 70 dB minimum CMRR, 0.007 µA max bias current, and voltage-feedback architecture in a small outline package. From $0.50 in stock worldwide shipping.
The LMP91051MT/NOPB is a dual-channel analog front-end IC from Texas Instruments designed for resistive and temperature sensor signal conditioning. It integrates programmable gain amplifiers and operates from a single supply, packaged in a 14-pin TSSOP for compact sensor interface designs.
Use the download button to access the DRV8301DCAR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the LMC660CN/NOPB schematic symbol, PCB footprint, and 3D model.
Use the download button to access the LF444CN/NOPB schematic symbol, PCB footprint, and 3D model.
SN74HC244DWR is an octal buffer and line driver IC with 3-state outputs, featuring HC/UH logic family, 150pF load capacitance, and 7.8mA output current. From $0.10 in stock worldwide shipping.
SN74HC244DW is an octal buffer and line driver with 3-state outputs, featuring HC CMOS logic family, 150pF load capacitance, and 7.8mA output current. From $0.266, in stock worldwide shipping.
Quadruple improved offset and ESD protection operational amplifier
LM324AN/NOPB is a low-power general-purpose quad operational amplifier with voltage-feedback architecture, featuring 85 dB CMRR, 0.25 µA max bias current, and 65 dB min CMRR. From $0.4477, in stock with worldwide shipping.
Precision, 130-dB CMRR, 700-µA, Low-Power, Instrumentation Amplifier
Precision, 200-μA Supply Current, 36-V Supply Instrumentation Amplifier
36-V, 1-A, 4.17-μVRMS, RF low-dropout (LDO) voltage regulator
Dual, Low-Power, Single-Supply Wideband Operational Amplifier
Use the download button to access the OPA2830IDR schematic symbol, PCB footprint, and 3D model.
Dual, Low-Power, Single-Supply Wideband Operational Amplifier
Use the download button to access the OPA2830ID schematic symbol, PCB footprint, and 3D model.
Use the download button to access the LMP91000SD/NOPB schematic symbol, PCB footprint, and 3D model.
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote