Texas Instruments

Wireless Charging ICs 10W Sgl Chip Wire less Power Rcvr

Use the download button to access the BQ51025YFPT schematic symbol, PCB footprint, and 3D model.

Use the download button to access the NE556DBR schematic symbol, PCB footprint, and 3D model.

Texas Instruments ICL7135CNG4 is a 4.5-digit (14-bit effective) dual-slope ADC delivering 3 SPS conversion rate with differential parallel output and -3 V to +6 V analog input range in a 28-pin PDIP package. Available in stock worldwide with competitive pricing.

ICL7135CN is a 4.5-digit BCD output A/D converter by Texas Instruments. Key specs: 5-digit display drive, ±1 LSB accuracy, single +5V supply, 40-pin DIP package. Available for worldwide shipping.

Gate Drivers Hi Freq Sync Buck NexFET Pwr Stage

Use the download button to access the CSD97395Q4MT schematic symbol, PCB footprint, and 3D model.

26V, bi-directional, zero-drift, low-/high-side, voltage output current sense amplifier

26-V, Bi-Directional, Zero-Drift, Low- or High-Side, Voltage Output Current Shunt Monitor

26-V, Bi-Directional, Zero-Drift, Low- or High-Side, Voltage Output Current Shunt Monitor

26-V, Bi-Directional, Zero-Drift, Low- or High-Side, Voltage Output Current Shunt Monitor

3-Phase Brushless Motor Pre-Driver with Dual Current Sense Amps and Buck Converter (PWM Ctrl)

26-V, Bi-Directional, Zero-Drift, Low- or High-Side, Voltage Output Current Shunt Monitor

26V, bi-directional, zero-drift, low-/high-side, voltage output current sense amplifier

UQFN-10

UQFN-10

Use the download button to access the TPS54231DR schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - LM393ADR - COMPARATOR DUAL, SMD, SOIC8, 393

LM393MX/NOPB is a low power, low offset voltage dual comparator from Texas Instruments. Features open-collector outputs, 5mV max offset voltage, and 0.4µA max bias current. From $0.31, in stock worldwide shipping.

Dual Differential Comparator

Low Power Low Offset Voltage Dual Comparator

Low Power Low Offset Voltage Quad Comparator

3.3-V ABT 10-Bit Addressable Scan Ports Multidrop-Addressable IEEE STD 1149.1 (JTAG) TAP Transceiver

3.3-V ABT Scan Test Devices With 18-Bit Universal Bus Transceivers

8-Bit 41 kSPS ADC Serial Out, Ratiometric Op or Vcc Ref, TTL/MOS Input & Output Compatible, 4 Ch.

DIP-20

8-Bit 41 kSPS ADC Serial Out, Ratiometric Op or Vcc Ref, TTL/MOS Input & Output Compatible, 4 Ch.

TLV0838IDW is an 8-channel, 8-bit successive approximation ADC from Texas Instruments with 32µs max conversion time and 3.6V analog input range. Available from $6.99 in stock with worldwide shipping.

TLV0834CD is an 8-bit successive approximation ADC from Texas Instruments supporting both differential and single-ended analog inputs with a maximum conversion time of 32 µs. It features a serial interface and accepts analog inputs from -0.05 V to 3.6 V in a 14-pin SOIC package. Available in stock worldwide with competitive pricing and fast shipping.

Texas Instruments TLV0838CPW, 8-bit Serial ADC Differential Input, 20-Pin TSSOP

Use the download button to access the TL431AQDBZR schematic symbol, PCB footprint, and 3D model.

The LM4040DIZ-2.5/NOPB is a 100-ppm/°C precision micropower shunt voltage reference from Texas Instruments, providing a stable 2.5V output with ±2.0% accuracy and ultra-low power consumption. Ideal for battery-powered and portable equipment. From $0.13, in stock worldwide shipping.

1% Accuracy Low-Voltage Adjustable Precision Shunt Regulator

100-ppm/°C precision micropower shunt voltage reference

150-mA, 6.5-V, 1-μA IQ Voltage Regulators with Enable

150-mA, 6.5-V, 1-μA IQ Voltage Regulators with Enable

Quad /S-/R latches

Texas Instruments SN74LS279AD Quad Latch, Transparent SR Type, 4.75 → 5.25 V, 16-Pin SOIC

CD74HC4067SM96E4 is a high-speed CMOS 16-channel single-ended analog multiplexer/demultiplexer with 89MHz bandwidth and up to 6V input, in a 24-pin SOP package. Enables 16:1 analog signal selection from a single control bus. Available from stock worldwide.

Texas Instruments CD74HC4067SM96 is a high-speed CMOS 16:1 single-ended analog multiplexer/demultiplexer operating from 3 V to 6 V with 89 MHz bandwidth, in a 24-pin SSOP package. Four binary address inputs select one of 16 bidirectional channels with break-before-make switching. Available worldwide with in-stock inventory.

CMOS OPERATIONAL AMPLIFIERS

1.8V, 35µA, microPower, Precision, Zero Drift CMOS Op Amp

Use the download button to access the OPA2330AIDRBR schematic symbol, PCB footprint, and 3D model.