Texas Instruments

Use the download button to access the TPS709A33DBVT schematic symbol, PCB footprint, and 3D model.

The LM4040D20IDCKRE4 is a precision micropower shunt voltage reference from Texas Instruments with a nominal output of 2.048 V and 1% accuracy. It features an output voltage range of 2.028 V to 2.068 V in a compact SOT-23 5-pin package. Available from stock worldwide with fast shipping.

Precision Micropower Shunt Voltage Reference

DC-DC Converter Inv/Step-Down 60V SOIC8 Texas Instruments LM2597HVM-5.0/NOPB, Step Down DC-DC Converter, 500mA, 8-Pin SOIC

Voltage Regulators - Switching Regulators Wide Input 65V, 1.5A Synchronous Buck / Fly-Buck? Converter 14-HTSSOP -40 to 125

8-Bit Binary Counters With 3-State Output Registers

Use the download button to access the TPS7A8400RGRT schematic symbol, PCB footprint, and 3D model.

Dual Differential Drivers and Receivers With +/-15-kV IEC ESD Protection

Dual Differential Drivers and Receivers With +/-15-kV IEC ESD Protection

Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset

Voltage References Dual Output Vref & Vref/2 Voltage Ref

10-MHz, Low-Noise, RRIO, CMOS Operational Amplifier for Cost-Sensitive Systems

4-Channel Differential-Input Analog Multiplexer

Translation - Voltage Levels 4B Dual Supply Bus Trancvr

TPS54227DDAR is a 4.5 V to 18 V input, 2 A synchronous step-down converter by Texas Instruments. Key specs: adjustable output 0.76 V to 7 V, 570 kHz PWM, 8-pin HSOP package. From $1.50, in stock with worldwide shipping.

DRV8832DGQR is a 1A low-voltage brushed DC motor driver IC from Texas Instruments with integrated voltage regulation and IN1/IN2 control interface. It supports up to 1.3A peak output current and operates from 0.95V to 6.8V supply. Available from $0.39 in stock with worldwide shipping.

Use the download button to access the DRV8832DGQ schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS61260DRVR schematic symbol, PCB footprint, and 3D model.

4.5V to 40V, 2A up to 15W Negative-Output Integrated Power Solution

TPS81256SIPR is a 3W high-efficiency boost converter module from Texas Instruments in a compact MicroSiP BGA package. It supports 2.5V to 5.5V input with current-mode PWM control and PFM operation for light loads. From $4.56, in stock with worldwide shipping.

Texas Instruments TPS84621RUQT, Step Down DC-DC Converter, Adjustable, 0.6 → 5.5 V, 0A 47-Pin, BQFN

200-mA Step Down Converter Module with 360nA Iq

Sensored single phase brushless-DC gate driver for 12V/24V/48V applications

18-V max sensored single-phase brushless-DC gate driver with adjustable current limit threshold

Variable-Speed Single-Phase Full-Wave Fan-Motor Pre-Driver

Piccolo™ 32-bit MCU with 120 MHz, FPU, TMU, 512 KB Flash, CLA, SDFM

Delfino™ 32-bit MCU with 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash, EMIF, 12b ADC

Fixed-Point Digital Signal Processor

Fixed-Point Digital Signal Processor

Piccolo™ 32-bit MCU with 40 MHz, 32 KB Flash

TEXAS INSTRUMENTS - TMS320F28054MPNT - MCU, 32BIT, C2000, 60MHZ, LQFP-80

TMS320F28062PZPS is a 32-bit C28x RISC microcontroller with 128KB Flash, 30MHz clock, integrated ADC/DAC/DMA, and 100-Pin HTQFP EP package. From $11.28, in stock worldwide shipping.

Fixed-Point Digital Signal Processor

TI,MM5452V/NOPB,IC,LCD MM5452V/NOPB, LCD Driver, 4.5-Digits 32-Segments, 3 → 10 V, 44-Pin PLCC

TPS709A30DBVT is a 150mA fixed 3V LDO linear regulator from Texas Instruments with ultra-low 300mV dropout voltage and wide 2.7V–30V input range. Ideal for battery-powered and automotive systems. From $0.57, in stock, worldwide shipping.

3.5V to 60V Input, 0.5A Step-Down Converter with Eco-Mode

The TPS54061DRBR is a 60V, 200mA synchronous step-down (buck) regulator from Texas Instruments featuring Eco-mode light-load efficiency, a wide 3.5V to 60V input range, and adjustable switching frequency up to 2.5MHz, suited for industrial and automotive power supplies.

4.7V to 60V Input, 50mA Synchronous Step-Down Converter with Low IQ

Use the download button to access the TPS54061DRBT schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS54062DRBT schematic symbol, PCB footprint, and 3D model.

TPS54040QDGQRQ1 is a automotive step-down switching regulator by Texas Instruments. Key specs: 42 V input capability, 0.5 A output current, AEC-Q100 automotive qualification. From RFQ pricing, in stock with worldwide shipping.