Texas Instruments

LDO Voltage Regulators 200mA Low Noise High-PSRR

LSSOP-5

Use the download button to access the TPS709B50DBVT schematic symbol, PCB footprint, and 3D model.

The TPS709B33DBVT is a fixed 3.3 V, 150 mA ultra-low quiescent current LDO regulator with wide 2.7 V to 30 V input range and reverse current protection. It features 0.3 V typical / 1.4 V maximum dropout voltage and operates from a single-function 5-pin SOT-23 package. From $0.65 in stock worldwide shipping.

150-mA 30-V ultra-low-Iq wide-input low-dropout (LDO) regulator with reverse current protection

USB3.1 10Gbps Dual Channel Linear Redriver

LM4051BIM3-ADJ/NOPB is an adjustable shunt voltage reference IC from Texas Instruments, offering an output voltage range of 1.24V to 10V with ±0.2% accuracy in a compact SOT-23 package. From $1.05, in stock worldwide shipping.

Use the download button to access the PGA206UA schematic symbol, PCB footprint, and 3D model.

The CD74HC4046AM is a high-speed CMOS phase-locked loop (PLL) IC integrating a voltage-controlled oscillator and two phase comparators for frequency synthesis and clock-recovery applications, operating across a 2 V to 6 V supply range. It is housed in a 16-pin SOIC package for straightforward surface-mount assembly. Available from stock worldwide with fast shipping.

The REF102CP is a precision 10 V three-terminal voltage reference in an 8-pin DIP package. It achieves 2.5 ppm/°C maximum temperature drift, 10.0 V output accuracy within ±2.5 mV, and accepts 11.4 V to 36 V input. Available from stock worldwide with competitive pricing.

6-60V Wide Vin, current mode boost, SEPIC and Flyback controller, AEC-Q100 qualified

Low-Noise 1-A Transformer Driver for Isolated Power Supplies, Internal Clock-160kHz

Use the download button to access the SN6505BDBVR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TS3USB30EDGSR schematic symbol, PCB footprint, and 3D model.

Enhanced Product 16-Bit Dual-Supply Bus Transc., Configurable Voltage Translation, 3-State Outputs

8-Bit Universal Bus Transceiver and Two 1-Bit Bus Transceivers with 3-State Outputs

Use the download button to access the LMZ21701SILR schematic symbol and PCB footprint.

Voltage Regulators - Switching Regulators 2.5A Power Module w/ 7V-50V Input

SIMPLE SWITCHER® 7V to 50V, 2.5A Wide Vin Power Module in Small Package

One Output, Integrated VCO, Low-Jitter Clock Generator

TMS320F28377SPZPS is a Texas Instruments Delfino 32-bit DSP MCU running at up to 200 MHz with 1024 KB Flash, 16-bit ADC, FPU, and TMU for real-time control. Dual-core architecture with CLA coprocessor delivers 400 MIPS aggregate for demanding motor and power control. Available from stock with worldwide shipping.

TPS61200DRCR is a synchronous boost converter from Texas Instruments accepting an input voltage as low as 0.3 V and delivering up to 5.5 V output via 1.3 A integrated switches. It supports a unique Down Mode allowing the output to track below the input for single-cell battery designs with adjustable output voltage from 0.3 V to 5.5 V. Packaged in a compact 3x3 mm 10-pin QFN with worldwide availability.

Use the download button to access the LM358PSR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPA6211A1DRBR schematic symbol, PCB footprint, and 3D model.

Dual, 15V single-supply, micro power operational amplifiers

The CD74HC73M96 is a dual negative-edge-triggered J-K flip-flop with reset from Texas Instruments in a 14-pin SOIC package, featuring high-speed HC CMOS operation at up to 20 MHz clock frequency with 6mA output drive and 50 pF load capacitance rating. Suitable for synchronous sequential logic and digital state machines. Available from stock worldwide with fast shipping.

CMOS Dual J-K Master-Slave Flip-Flop

Dual Positive-Edge-Triggered J-K Flip-Flops with Set and Reset

CD74HC112PW is a dual negative-edge-triggered J-K flip-flop with set and reset in TSSOP-16 package. It operates from 2 V to 6 V supply with maximum frequency of 20 MHz at 50 pF load. Available from stock with worldwide shipping.

CD74HC4053M is a high-speed CMOS triple 2-channel analog multiplexer/demultiplexer from Texas Instruments featuring 180 MHz bandwidth and 64 dB off-state channel isolation. It operates from a 2 V to 6 V supply, switches up to 3 independent SPDT channels, and is packaged in a 16-pin SOIC for surface-mount designs. In stock worldwide for analog signal routing applications.

The CD74HC4053PWR is a high-speed CMOS triple 2-channel analog multiplexer/demultiplexer from Texas Instruments, featuring three independent SPDT switches with 180MHz bandwidth and up to 6V input voltage. Housed in a 16-pin SOIC (PDSO) surface-mount package, it enables flexible signal routing in audio, data acquisition, and communications circuits. Available from authorized distributors with worldwide shipping.

Use the download button to access the CC1350F128RGZR schematic symbol, PCB footprint, and 3D model.

Translation - Voltage Levels Dual Bidirect Multi VTG Level Translator

Use the download button to access the LSF0102DCUR schematic symbol, PCB footprint, and 3D model.

Dual Bidirectional Multi-Voltage Level Translator

36V, microPower, Rail-to-Rail Output, General Purpose Op Amp in MicroPackages

36V, microPower, Rail-to-Rail Output, General Purpose Op Amp in MicroPackages

OPA191ID is a precision operational amplifier from Texas Instruments featuring ultra-low offset voltage of 25 µV max, 120 dB CMRR, and rail-to-rail output. Ideal for industrial sensing and precision measurement. From $1.837 in stock with worldwide shipping.

Low-Power, Precision, 36-V, e-trim CMOS Amplifier

Use the download button to access the CSD87381P schematic symbol, PCB footprint, and 3D model.