Texas Instruments

16-Channel Constant Current LED Driver with 4-Channel Grouped Delay

Use the download button to access the TLC5928PWPR schematic symbol, PCB footprint, and 3D model.

Single Pole, Double-Throw (SPDT) Analog Switch or 2:1 Analog Multiplexer/Demultiplexer

Audio Amplifiers 325-W Stereo High-Performance, High-Definition, Class-D Amplifier 44-HTSSOP 0 to 70

Hex Inverters With Open-Drain Outputs

UCC28951QPWPRQ1 is an automotive-grade phase-shifted full-bridge PWM controller from Texas Instruments. It supports current-mode control with input voltage range of 7.3V to 17V, operating in a 24-pin SOIC package. Ideal for high-efficiency DC-DC converters in automotive and industrial applications. Available in stock with worldwide shipping.

ADS1299-6PAG is a low-noise 6-channel 24-bit delta-sigma ADC for biopotential measurements in TQFP-64 from Texas Instruments. Key specs: ±4.5 V analog input, integrated PGA, programmable bias drive. From $39.50, in stock with worldwide shipping.

The ADS1299-4PAGR is a low-noise, 4-channel, 24-bit delta-sigma ADC optimized for biopotential measurements. It delivers 24-bit resolution with a noise level as low as 1 µVPP, supporting up to 4 differential inputs and a programmable gain amplifier. Available from $29.09 with worldwide shipping.

Low-Noise, 4-Channel, 24-Bit Analog-to-Digital Converter for Biopotential Measurements

Enhanced Product Ultra Low-Power 10 Ma Ldo Linear Regulators With Power Good

High-Brightness LED Matrix Manager for Automotive Headlight Systems

SN74LVC1G125DBVT is a single-channel 3-state bus buffer IC by Texas Instruments, supporting 1.65V–5.5V supply voltage with 24mA output drive. Key specs: propagation delay 3.5ns, SOT-23-5 package, 1.8V/3.3V/5V logic compatible. From $0.075, in stock with worldwide shipping.

Dual Sync Step-Down Controller for Low Voltage Power Rails in Embedded Computing

Quadruple Differential Line Driver

MAX3221EIPWR is a 3V to 5.5V single-channel RS-232 transceiver IC by Texas Instruments with ±15kV ESD protection. Key specs: 1 driver / 1 receiver, 250kbps data rate, TSSOP-16 package, -40°C to +85°C industrial temperature range. From $0.99, in stock with worldwide shipping.

3.3-V differential transceiver

Type-C Configuration Channel Logic and Port Control

USB Type-C DP ALT Mode, 10 Gbps Linear Redriver Crosspoint Switch

1-Channel ESD Protection Diode for USB Type-C and Thunderbolt 3

USB Type-C Configuration Channel Logic and Port Control

OCTAL BUFFERS AND DRIVERS

OPA847IDBVRG4 is a integrated circuit for board-level control by Texas Instruments. Key specs: production sourcing support, inquiry-only sourcing. From inquiry pricing, in stock with worldwide shipping.

UCC24610DRBR is a high-speed synchronous rectifier controller by Texas Instruments, designed for flyback and forward converters. Key specs: 100V maximum drain voltage support, 4A gate drive current, 13ns propagation delay. From $0.1116, in stock with worldwide shipping.

Ultra-High performance Sub-1 GHz Transceiver for Narrowband Systems

CD74AC540M96 is an advanced CMOS octal inverting buffer and line driver IC by Texas Instruments with 3-state outputs. Key specs: 8-bit wide, 24 mA output sink current, dual output enable, 20-SOIC package. From $0.55 in stock, worldwide shipping.

500 mA Low Dropout Regulator

THS4521IDGKR is a very low power, rail-to-rail output, fully differential amplifier from Texas Instruments. It features 9.3 MHz bandwidth, 80 dB CMRR, and 0.9 µA bias current. From $1.456, in stock with worldwide shipping.

The THS4130IDGNR is a 150 MHz fully differential input/output low-noise operational amplifier with shutdown capability in a small outline package. It features 80 MHz bandwidth, 80 dB minimum CMRR, and voltage-feedback architecture. Available from Texas Instruments with worldwide shipping.

THS4131IDGNR is a fully differential input/output low noise voltage-feedback operational amplifier from Texas Instruments, featuring 80 MHz bandwidth, 80 dB CMRR, and 6 µA bias current. Ideal for ADC driving, signal conditioning, and high-speed data acquisition. From $5, in stock, worldwide shipping.

Dual, Ultra low power 0.25mA, RRO, fully differential amplifier

Use the download button to access the SN74LV4T125RGYR schematic symbol, PCB footprint, and 3D model.

SN74LV1T34DCKR is a single-gate buffer with open-drain output in LV-1T logic family by Texas Instruments. Key specs: 1.65V to 5.5V supply voltage, 3.3V operation, SC-70 5-pin package. From $0.1162, in stock with worldwide shipping.

Automotive-grade 3.5V to 60V wide input, 1.5A synchronous buck converter with Eco-Mode for high efficiency. Features current-mode PWM control and integrated power MOSFETs. From $1.79 in stock, worldwide shipping.

Use the download button to access the DAC5578SPWR schematic symbol, PCB footprint, and 3D model.

SINGLE BUS BUFFER GATE SINGLE BUS BUFFER GATE

High-Bandwidth, High-Precision, Low THD+N, 16-Bit and 18-Bit ADC Drivers

150mA Low-Noise Low-Dropout Regulator With Shutdown

OPA2325IDR is a dual-channel, low-noise CMOS operational amplifier from Texas Instruments featuring 10 µV max offset voltage, 5.5 V supply, and 10 MHz bandwidth. Ideal for precision signal conditioning, sensor interfaces, and low-power instrumentation. From $0.91, in stock worldwide shipping.

Use the download button to access the TLV172IDBVR schematic symbol, PCB footprint, and 3D model.

TLC5925IDWRG4 is a low-power 16-channel constant-current LED sink driver IC from Texas Instruments. Features serial data input interface with 16 independent output channels, supporting LED display and lighting control applications. From $0.63 in stock with worldwide shipping.

LM3526MX-H/NOPB is a dual-port USB power switch with over-current protection by Texas Instruments. Key specs: 500mA current limit per port, active-high enable, SOT-23-6 package. From $0.79, in stock with worldwide shipping.

TPA3118D2DAPR is a 30W stereo Class D audio amplifier IC by Texas Instruments, featuring 36dB gain, 22kHz bandwidth, and 102dB SNR for high-efficiency audio output. From $0.58, in stock with worldwide shipping.

Use the download button to access the TPA3110D2PWPR schematic symbol, PCB footprint, and 3D model.

TPA3113D2PWPR is a 6W stereo Class-D audio power amplifier with SpeakerGuard protection, 102dB SNR, and 22kHz bandwidth. Features 2-channel output, low EMI filterless design, ideal for portable speakers and home audio. From $0.5991, in stock with worldwide shipping.

Use the download button to access the TPA3111D1PWPR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the OPA1664AIDR schematic symbol, PCB footprint, and 3D model.