Texas Instruments

UC3526DWTR is a voltage-mode PWM switching controller IC from Texas Instruments. Supports 8V to 35V input voltage with pulse width modulation control technique. Ideal for SMPS, DC-DC converters, and industrial power supplies. From $1.20 in stock with worldwide shipping.

Regulating Pulse Width Modulators

TEXAS INSTRUMENTS - UC3526ADWG4 . - Regulating Pulse Width Modulator, 35V-7V supply, 600 kHz, 13V/100mA out, SOIC-18

Regulating Pulse Width Modulator

Regulating Pulse Width Modulators

TEXAS INSTRUMENTS - UC3526NG4 . - PWM Controller, 35V-8V supply, 400 kHz, 5.1V/100mA out, DIP-18

TEXAS INSTRUMENTS - UC3525ANG4 . - PWM Controller, 35V-4.5V supply, 500 kHz, 19V/100mA out, DIP-16

TEXAS INSTRUMENTS - TAS5612PHD - Audio Power Amplifier, 125 W, D, 2 Channel, 16V to 34.1V, 10.8V to 13.2V, HTQFP, 64 Pins

SIMPLE SWITCHER 4.5V to 42V, 0.3A Step-Down DC/DC Switching Regulator in SOT-23

Low-Noise, Low Quiescent Current, 36V RRI/O Precision Op Amps, E-Trim™ Series

Use the download button to access the LM380N-8/NOPB schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LM380N/NOPB schematic symbol, PCB footprint, and 3D model.

Automotive, 250MHz, Rail-to-Rail I/O, CMOS Quad Operational Amplifier

8-Bit Bi-directional, Level-Shifting, Voltage Translator for Open-Drain and Push-Pull Applications

Use the download button to access the TDC7200PWR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the BQ2014SN-D120 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the BQ2004HSN schematic symbol, PCB footprint, and 3D model.

TO-92, 3 PIN

MCU 32-bit MSP430 RISC 64KB Flash 2.5V/3.3V Medical 64-Pin VQFN EP T/R

Highly Integrated Digital Controller for Isolated Power

HEX INVERTERS

TEXAS INSTRUMENTS - INA126EA - Instrument Amplifier, 1, 500 V, 0.4 V/ s, 200 kHz, 1.35V to 18V, MSOP RoHS Compliant: Yes

Micropower instrumentation amplifier by Texas Instruments. Single-supply operation with 83dB CMRR, 250µV max offset voltage, 0.2MHz bandwidth, and 50nA bias current. Ideal for medical instrumentation, bridge sensors, and precision data acquisition in space-constrained applications.

SP Amp INSTR Amp Single 18V/36V 8-Pin INA126EA/250, Instrumentation Amplifier, 0.5mV Offset, 74dB CMRR, 12 V, 15 V, 18 V, 24 V, 28 V, 3 V, 5 V, 9 V, 8-Pin

Wireless Charging ICs 10W Sgl Chip Wire less Power Rcvr

Use the download button to access the BQ51025YFPT schematic symbol, PCB footprint, and 3D model.

Use the download button to access the NE556DBR schematic symbol, PCB footprint, and 3D model.

ICL7135CN is a 4.5-digit BCD output A/D converter by Texas Instruments. Key specs: 5-digit display drive, ±1 LSB accuracy, single +5V supply, 40-pin DIP package. Available for worldwide shipping.

Gate Drivers Hi Freq Sync Buck NexFET Pwr Stage

Use the download button to access the CSD97395Q4MT schematic symbol, PCB footprint, and 3D model.

26V, bi-directional, zero-drift, low-/high-side, voltage output current sense amplifier

26-V, Bi-Directional, Zero-Drift, Low- or High-Side, Voltage Output Current Shunt Monitor

26-V, Bi-Directional, Zero-Drift, Low- or High-Side, Voltage Output Current Shunt Monitor

26-V, Bi-Directional, Zero-Drift, Low- or High-Side, Voltage Output Current Shunt Monitor

3-Phase Brushless Motor Pre-Driver with Dual Current Sense Amps and Buck Converter (PWM Ctrl)

26-V, Bi-Directional, Zero-Drift, Low- or High-Side, Voltage Output Current Shunt Monitor

26V, bi-directional, zero-drift, low-/high-side, voltage output current sense amplifier

UQFN-10

UQFN-10

Use the download button to access the TPS54231DR schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - LM393ADR - COMPARATOR DUAL, SMD, SOIC8, 393

LM393MX/NOPB is a low power, low offset voltage dual comparator from Texas Instruments. Features open-collector outputs, 5mV max offset voltage, and 0.4µA max bias current. From $0.31, in stock worldwide shipping.