Texas Instruments

Texas Instruments TS3A5018PWG4 is a 10-Ω quad SPDT analog switch with 4 channels, 300 MHz bandwidth, and 1.65V–3.6V supply. Supports high off-state isolation of 48 dB for signal routing applications. From $0.41, in stock with worldwide shipping.

10-Ohm Quad SPDT Analog Switch

10-Ohm Quad SPDT Analog Switch

Analog SW Quad SPDT 3.6V 16-Pin SSOP Texas Instruments TS3A5018DBQR, Analogue SPDT Switch Quad SPDT, 3 V, 16-Pin SSOP

Synchronous Rectifier Controller With Ultra-Low Standby Current

36V precision rail-to-rail input/output op amp with 100µV max offset voltage, 120dB CMRR, and 10MHz bandwidth. Features low bias current of 20pA and voltage-feedback architecture. From $0.69 in SOT-23 package, in stock with worldwide shipping.

Use the download button to access the TPS563208DDCR schematic symbol, PCB footprint, and 3D model.

4.5V to 28V Input, 2A Output, EMI Friendly Synchronous Step-Down Converter

Use the download button to access the TL16C754BPN schematic symbol, PCB footprint, and 3D model.

TQFP-80

Low power C55x fixed point DSP- up to 300MHz

Use the download button to access the LM43603PWPR schematic symbol, PCB footprint, and 3D model.

Conv DC-DC 3.5V to 36V Step Down Single-Out 1V to 28V 0.5A Automotive 16-Pin HTSSOP EP T/R

TEXAS INSTRUMENTS - LM43601QPWPTQ1 - DC-DC Switching Buck Step Down Regulator, Adjustable, 3.5V-36Vin, 1V-28Vout, 1Aout, HTSSOP-16

Automotive Qualified SIMPLE SWITCHER® 3.5V to 36V, 1A Synchronous Step-Down Voltage Converter

TEXAS INSTRUMENTS - ISO5852SDWR - ISOLATED IGBT/MOSFET DRIVER, 5.5V, SOIC

1A Low-Noise Fast LDO Regulator SOT223-6 Texas Instruments TPS73801DCQR, LDO Voltage Regulator, Adjustable 1A, 1.21 → 20 V, 6-Pin SOT-223

Use the download button to access the TPS54318RTER schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TLC555QDRQ1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LM1085IT-12/NOPB schematic symbol, PCB footprint, and 3D model.

1A,3.3V,LDO Voltage Reg.,LM3940IT-3.3 Texas Instruments LM3940IT-3.3/NOPB, LDO Voltage Regulator, 1A, 3.3 V, 4.5 → 7.5 Vin, 3-Pin TO-220

The LM1086IT-ADJ/NOPB is a 1.5A adjustable low-dropout linear regulator in a TO-263 package, operating from 2.6V to 29V input. It features a typical dropout voltage of 1.3V at full load, with input-output differential up to 15V, making it suitable for post-regulation, battery chargers, and local power supply circuits in industrial and consumer electronics.

5A Fixed / Adjustable Output Linear Regulator

3A,5V,LDO Voltage Regulator,LM1085IT-5.0 Texas Instruments LM1085IT-5.0/NOPB, LDO Voltage Regulator, 3A, 5 V, 2.6 → 25 Vin, 3-Pin TO-220

Autoswitching Power Mux

Texas Instruments TPS2115ADRBR is a dual-channel power mux load switch with adjustable threshold, housed in an 8-pin SON package. It provides automatic source selection between two power inputs with low on-resistance for efficient power management. Available in tape and reel format for high-volume SMT production with worldwide shipping.

Octal Transparent D-Type Latches With 3-State Outputs

Two-Channel Automotive Digital Amplifier

Use the download button to access the PCM2704DBR schematic symbol, PCB footprint, and 3D model.

98dB SNR Stereo Full Speed DAC with line-out and S/PDIF output, Bus/Self-powered (S/W Control)

98dB SNR Stereo Full Speed DAC with line-out & S/PDIF output, Bus/Self-powered (Ext. ROM Interface)

Texas Instruments,PCM2704CDB,IC,DAC PCM2704CDB, Audio DAC Dual 16 bit-, 48ksps Serial (I2C), 28-Pin SSOP

Use the download button to access the PCM2704DB schematic symbol, PCB footprint, and 3D model.

TMS320C6657CZH is a dual-core C66x fixed/floating-point DSP by Texas Instruments, running at up to 1.25 GHz with 4MB on-chip RAM and multi-core architecture. Key specs: dual C66x DSP cores, 1.25 GHz clock, PCIe Gen2, SRIO, and Gigabit Ethernet interfaces. From $100.8, in stock with worldwide shipping.

1MHz, 45uA, RRIO, Single Op Amp

OP Amp Single GP R-R I/O 5.5V 5-Pin Texas Instruments OPA348AIDCKT Op Amp, 1MHz CMOS, Rail to Rail, 3 V, 5 V, 5-Pin SC-70

Precision Micropower Shunt Voltage Reference

±1.5°C 2.7V to 5.5V digital temperature sensor with SPI interface and -40 to 125°C

100V Half Bridge Gate Driver with Programmable Dead-Time

6-channel Power Power Management IC (PMIC) with 3DC/DCs, 3 LDOs, I2C Interface and DVS

OP Amp Dual Volt Fdbk 6V/12V 8-Pin SOIC Texas Instruments OPA2690ID, Dual Op Amp, 250MHz, 9 V, 8-Pin SOIC

Space saving 800-mA low-dropout linear regulator with internal current limit

17 V Input, 3A Synchronous Step-Down Regulator in SOT-23

Use the download button to access the TL7660CDGKT schematic symbol, PCB footprint, and 3D model.

TL7660CP is a CMOS voltage converter IC that inverts or doubles input voltages from 1.5V to 10V with minimal external components. Features switched-capacitor topology, 1 function, DIP-8 package. From $0.85, in stock, worldwide shipping.

CMOS Voltage Converter

Voltage Converter CMOS SOIC8 Texas Instruments TL7660CD, Charge Pump Voltage Doubler 3mA 10 kHz, -1.5 → -10 V, 8-Pin, SOIC