Texas Instruments

12/10/8-Bit, 1 MSPS, 16/12/8/4-Channel, Single-Ended, MicroPower, Serial Interface ADCs

ADS7950SRGER is a 12-bit, 1 MSPS, 4-channel single-ended successive approximation ADC from Texas Instruments with SPI interface and 6 V max input, in a QFN-24 package. Available from stock worldwide.

TMS320C203PZ80 is a 16-bit fixed-point digital signal processor by Texas Instruments with 80 MIPS performance and on-chip flash memory. Key specs: 16-bit CPU, 80 MHz clock, 4KB RAM, SPI/SCI peripherals. From $13, in stock with worldwide shipping.

SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT

Automotive Catalog Single Bus Buffer Gate With 3-State Output

SINGLE INVERTER GATE

16-CH Gamma-Voltage Generator and Vcom Calibrator with Integrated Two-Bank Memory

8-CH Gamma-Voltage Generator and High Slew Rate Vcom with Integrated Two-Bank Memory

8-channel gamma-voltage generator and Vcom calibrator with integrated two-bank memory, supporting 9–20 V input and 260°C peak reflow. From $1.76, in stock, worldwide shipping.

• Single IC Li-Ion Protection for 3-Series to 6- DESCRIPTION Series Cells The bq77PL157 is a stackable overvoltage protection device for 3, 4, 5 or 6 series cell Li-Ion battery packs. • Stackable to Protect up to 18-Series Cells This device incorporates a precise and accurate • Programmable Detection Time Delay overvoltage detection circuit with preconfigured • Low Power Consumption threshold limits. Additional features include the ability to stack multiple parts to monitor up to 18 series – Typical

BQ3287MT-SB2 is a real-time clock and calendar IC with embedded SRAM by Texas Instruments. Key specs: I2C interface, 3V battery backup, integrated crystal oscillator. From $25, in stock with worldwide shipping.

BQ3287MT-I is a integrated circuit for board-level control by Texas Instruments. Key specs: production sourcing support, inquiry-only sourcing. From inquiry pricing, in stock with worldwide shipping.

BQ2944L9DRBT is a multi-cell Li-Ion battery gas gauge IC by Texas Instruments, featuring accurate state-of-charge measurement and cell balancing. Key specs: supports 2–4 cell battery packs, I2C interface, low 75µA operating current. From $0.73, in stock with worldwide shipping.

Voltage Protection for 2-Series, 3-Series, or 4-Series Cell Li-Ion Batteries 4.30 V, 4.35 V, 4.40 V, 4.45 V, 4.50 V

Voltage Protection for 2-Series, 3-Series, or 4-Series Cell Li-Ion Batteries 4.30 V, 4.35 V, 4.40 V, 4.45 V, 4.50 V

Battery Battery Protection IC Lithium Ion-40°C ~ 110°C (TA)4 V to 25 V 8-SON (3x3)

Battery Protection Li-Ion 4.3V 8-Pin VSON EP T/R

BQ29440DRBR is a secondary over-voltage protection IC for 2-4 cell series Li-Ion/LiPoly battery packs with 4.35V threshold, 28V max input, single-channel protection. From $0.95, in stock, worldwide shipping.

Use the download button to access the BQ29200DRBR schematic symbol, PCB footprint, and 3D model.

BQ27505YZGT-J4 is a system-side impedance track fuel gauge IC from Texas Instruments, featuring 1-channel battery monitoring with adjustable threshold and 12-ball BGA package. From $4.45, in stock with worldwide shipping.

System-Side Impedance Track Fuel Gauge

System-Side Impedance Track Fuel Gauge

System-Side Impedance Track Fuel Gauge

BQ27505YZGR-J1 is a system-side impedance track fuel gauge IC from Texas Instruments, featuring single-cell Li-Ion battery monitoring with adjustable thresholds and 12-pin BGA package. From $2.07 in stock, worldwide shipping.

System-Side Impedance Track Fuel Gauge

Use the download button to access the BQ25060DQCR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the BQ25040DQCR schematic symbol, PCB footprint, and 3D model.

Stand-Alone Synchronous Switch-Mode Lithium Phosphate Battery Charger with System Power Selector and Low Iq

28V synchronous switch-mode charge management IC for lithium phosphate batteries

Stand-Alone Synchronous Switch-Mode Li-Ion or Li-Polymer Battery Charger with System Power Selector and Low Iq

JEITA Guideline Compatible Stand-Alone Synchronous Switch-Mode Li-Ion or Li-Polymer Battery Charger with System Power Selector and Low Iq

Use the download button to access the BQ24600RVAR schematic symbol, PCB footprint, and 3D model.

BQ24382DSGT is a high-voltage 1-cell Li-Ion battery pack protection IC by Texas Instruments. Key specs: overvoltage protection threshold 4.275V, overcurrent detection, integrated FET drivers. From $0.3591, in stock with worldwide shipping.

Battery Battery Protection IC Lithium Ion-40°C ~ 125°C (TJ)5 V 8-WSON (2x2)

Battery Battery Protection IC Lithium Ion-40°C ~ 125°C (TJ 5.5 V 8-WSON (2x2)

BQ24352DSGR is an over-voltage and over-current charger front-end protection IC with integrated charging FET, supporting up to 30V input and 4.35V battery OVP threshold. From $0.46, in stock, worldwide shipping.

BQ24350DSGT is a single-cell lithium-ion battery protection IC with battery over-voltage protection at 4.35V, supporting 5.5V–30V input. Available in 8-WSON (2x2) package. From $0.625, in stock, worldwide shipping.

BQ24350DSGR is a single-cell Li-Ion/Li-Polymer battery charger IC by Texas Instruments featuring integrated safety timer, input overvoltage protection, and up to 1.5A charge current. Key specs: 4.2V regulation voltage, 6V max input, WSON-8 package. From $0.49, in stock with worldwide shipping.

Battery Battery Protection IC Lithium Ion-40°C ~ 125°C (TJ)3 V to 30 V 8-WSON (2x2)

Battery Battery Protection IC Lithium Ion-40°C ~ 125°C (TJ)3 V to 30 V 8-WSON (2x2)

Overvoltage and Overcurrent Protection IC and Li+ Charger Front-End Protection IC