Texas Instruments

SINGLE INVERTER GATE

Single Positive-Edge-Triggered D-Type Flip-Flop

SINGLE POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLEAR AND PRESET

Use the download button to access the SN74HC4851PW schematic symbol, PCB footprint, and 3D model.

5-V CAN Transceiver With I/O Level Shifting and Supply Optimization

STEREO AUDIO CODEC

Texas Instruments OPA2330AIDGKTG4 is a dual-channel, zero-drift CMOS precision op amp with 35 µA quiescent current per channel, 50 µV max offset voltage, and 1.8 V single-supply operation in a MSOP-8 package. Available from authorized distributors with worldwide shipping.

4.25 Gbps VCSEL Driver with Serial Interface

SN74LVC1G34DSFR is a single-gate buffer IC from Texas Instruments LVC logic family, supporting 1.65V–5.5V supply with 50pF load capacitance, 32mA output drive, and 6-pin SOT-563 package. From $0.0842, in stock worldwide shipping.

SINGLE SCHMITT-TRIGGER BUFFER

SN74LVC1G14DRYRG4 is a single-channel Schmitt-trigger inverter by Texas Instruments in the LVC family. Key specs: 1.65 V to 5.5 V supply range, typical hysteresis of 0.9 V at 3.3 V, and ultra-compact 5-pin SOT-553 package. Available in tape-and-reel for high-volume automated assembly with worldwide distribution.

The SN74LVC1G07DCK6 is a single-channel open-drain buffer from Texas Instruments in the LVC logic family, operating from a 1.65 V to 5.5 V supply with TTL and CMOS-compatible inputs. Its open-drain output can be pulled up to a voltage independent of VCC, enabling level translation from 1.8 V logic up to 5.5 V. Housed in a 5-pin SC-70 package, it suits level shifting, wire-OR bus driving, and signal conditioning in portable and low-power designs.

Single Inverter Buffer/Driver With Open-Drain Output

Use the download button to access the SN74LVC1G00DRYR schematic symbol, PCB footprint, and 3D model.

Quadruple Bus Buffer Gate With 3-State Outputs

Enhanced Product Quadruple 2-Input Positive-And Gate

Operate From 1.65 V to 3.6 V • Max t pd of 3.7 ns at 3.3 V • Specified From –40°C to 85°C, • I off Supports Partial-Power-Down Mode –40°C to 125°C, and –55°C to 125°C Operation • Inputs and Open-Drain Outputs Accept • Latch-Up Performance Exceeds 250 mA Per Voltages up to 5.5

The SN74LVC04APW is a hex inverter logic IC from Texas Instruments in the LVC family, providing six independent inverter gates. It operates on 2.5V or 3.3V supplies and is 5V-tolerant on inputs for mixed-voltage system compatibility. Available in 14-pin TSSOP package with worldwide shipping.

QUADRUPLE 2-INPUT POSITIVE-NAND GATES

Use the download button to access the SN74LV595APWRG3 schematic symbol, PCB footprint, and 3D model.

The SN74LV595ADRG3 is an 8-bit serial-in parallel-out shift register from Texas Instruments in the LV logic family, supporting up to 40 MHz clock frequency with 50 pF load in a 16-pin SOIC package. It features a serial output for daisy-chaining multiple devices to expand output lines. Available from stock with worldwide shipping.

Enhanced Product 12-Bit Asynchronous Binary Counter

Octal Bus Transceivers With 3-State Outputs

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

Quadruple bus buffer gates with 3-state outputs

HEX INVERTERS

Octal bus transceivers

Octal Buffers and Line Drivers with 3-State Outputs

DUAL 4-BIT DECADE AND BINARY COUNTERS

8-INPUT POSITIVE -NAND GATE

DIP-16

Quad 2-input positive-NAND gates with open collector outputs

Quadruple 2-Input Positive-OR Gates

Octal Buffers And Line Drivers With 3-State Outputs