Texas Instruments

TLC2543CDWR is a 12-bit, 11-channel analog-to-digital converter by Texas Instruments. Key specs: 12-bit resolution, 11 multiplexed inputs, serial interface, 66 kSPS throughput. From $9.05, in stock with worldwide shipping.

Use the download button to access the TLC2274ACPWR schematic symbol, PCB footprint, and 3D model.

TLC2274ACDR is a quad rail-to-rail output operational amplifier with voltage-feedback architecture, offering 75 dB CMRR, 0.1 pA max bias current, and wide supply range. From $0.63, in stock with worldwide shipping.

OPERATIONAL AMPLIFIERS

TLC2264AID is an advanced LinCMOS rail-to-rail quad operational amplifier by Texas Instruments with very low input bias current. Key specs: 0.8 nA maximum input bias current, 75 dB minimum CMRR, single 3 V to 16 V or dual ±1.5 V to ±8 V supply, in a 14-pin SOIC package. Available from stock with worldwide shipping.

Advanced LinCMOS™ Rail-To-Rail Dual Operational Amplifier

OPERATIONAL AMPLIFIERS

Rail-To-Rail Dual Operational Amplifier

Use the download button to access the TLC2201AMD schematic symbol, PCB footprint, and 3D model.

10-Bit, 164 kSPS ADC Parallel Out, Direct I/F to DSP/uProcessor

• 10-Bit Resolution A/D Converter • 11 Analog Input Channels • Three Built-In Self-Test Modes • Inherent Sample-and-Hold Function • Total Unadjusted Error: ±1LSB Max • On-Chip System Clock • End-of-Conversion (EOC) Output • Terminal Compatible With TLC542 • CMOS Technology

10-Bit, 38 kSPS ADC Serial Out, On-Chip System Clock, 11 Ch with -40C to 125C temerature range optio

Quad Micropower Precision Low-Voltage Operational Amplifier

TLC1078ID is a dual micropower precision low-voltage operational amplifier by Texas Instruments with ultra-low bias current. Key specs: 60 fA max bias current, 95 dB typical CMRR, 75 dB minimum CMRR, 8-pin SOIC package. From $0.80, in stock with worldwide shipping.

Use the download button to access the TL972QDRQ1 schematic symbol, PCB footprint, and 3D model.

OUTPUT RAIL-TO-RAIL VERY-LOW-NOISE OPERATIONAL AMPLIFIERS

TL971QDRQ1 is an automotive-grade, single-channel precision operational amplifier by Texas Instruments. Key specs: 5.5V max supply voltage, 1.5MHz gain-bandwidth product, rail-to-rail output swing. From $0.30, in stock with worldwide shipping.

The TL7700CDGKTG4 is a single-channel voltage supervisor with adjustable threshold and open-drain output by Texas Instruments. Key specs: adjustable reset threshold, 1-channel monitoring, 8-pin VSSOP (TSSOP8) package. From stock with worldwide shipping.

TL7700CDGKRG4 is a integrated circuit for board-level control by Texas Instruments. Key specs: production sourcing support, inquiry-only sourcing. From inquiry pricing, in stock with worldwide shipping.

SUPPLY-VOLTAGE SUPERVISOR

TL714CD is a single high-speed differential comparator with push-pull outputs from Texas Instruments. It features 600 µA max bias current, 10 mV max input offset voltage, and supports 1 comparator function in an 8-pin SOIC package. From $2.10, in stock with worldwide shipping.

TL432BQDBZRQ1 is an automotive-grade adjustable precision shunt regulator with output voltage range of 2.495V to 36V and 100mA output current. AEC-Q100 qualified for harsh automotive environments. From $0.12 in stock with worldwide shipping.

2% Accuracy Adjustable Precision Shunt Regulator

TL431BIDE4 is a precision programmable shunt voltage reference with adjustable output from 2.495 V to 36 V and maximum cathode current of 100 mA, housed in an 8-pin SOIC package. It features tight initial accuracy and low temperature coefficient for stable power-supply feedback. Commonly used in switching power supplies, linear regulators, and battery management circuits.

Adjustable precision shunt regulator

1% Accuracy Adjustable Precision Shunt Regulator

Automotive Catalog Precision Micropower Shunt Voltage Reference

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

Automotive Catalog Precision Micropower Shunt Voltage Reference

Automotive Catalog Precision Micropower Shunt Voltage Reference

Automotive Catalog Precision Micropower Shunt Voltage Reference

TL4050A50QDCKRQ1 is a 5.0V precision micropower shunt voltage reference by Texas Instruments, qualified for automotive applications. Key specs: 0.5% initial accuracy, 50ppm/°C temperature coefficient, 100µA to 15mA operating current range. From $1.45, in stock with worldwide shipping.

TL3845BD-8 is a high-performance current-mode PWM controller IC from Texas Instruments. It operates with 12V–30V input voltage and features pulse width modulation control. From $0.5053, in stock worldwide shipping.

CURRENT-MODE PWM CONTROLLERS

TL3695P is a single-channel RS-422/RS-485 differential bus transceiver from Texas Instruments in an 8-pin DIP package. It supports EIA-422, EIA-485, and V.11 standards with a tri-state receiver, differential Schmitt-trigger inputs, and shutdown mode with 1 receiver remaining active. Available from stock with worldwide shipping.

DIFFERENTIAL BUS TRANSCEIVER

HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIER

Automotive Catalog Single Differential Comparator

TL331IDBVRG4 is a high voltage single differential comparator with open-collector/open-drain output, 5mV max input offset voltage, and 0.4µA max bias current. Available in compact SOT-23-5 package. From $0.085 in stock with worldwide shipping.

TL317PSRE4 is a 1.2V to 37V adjustable positive linear voltage regulator by Texas Instruments. Key specs: 100mA output current, adjustable output voltage from 1.2V to 37V, SOT-223 package. Available in stock with worldwide shipping.

Use the download button to access the TL317PSR schematic symbol and PCB footprint.

The Texas Instruments TL317PSG4 is a 3-terminal adjustable linear voltage regulator with a dropout voltage of 5V and input-output differential range of 5V to 35V in an 8-pin SOIC package. It offers excellent line regulation of 0.05%/V and load regulation of 4.16% for stable adjustable output voltages. Available from stock with worldwide shipping.

TL317PSE4 is a 3-terminal adjustable positive linear voltage regulator by Texas Instruments. Key specs: 1.25 V to 37 V adjustable output, 35 V max input-output differential, 0.05%/V line regulation. Available from stock with worldwide shipping.

Use the download button to access the TL2575HV-05IN schematic symbol, PCB footprint, and 3D model.

The TL16CP554APM is a quad asynchronous communications element (QUART) from Texas Instruments, integrating four independent UART channels with an 8-bit external data bus and up to 16MHz clock frequency. It supports NRZ data encoding at up to 125 kbps per channel and is housed in a 64-pin QFP package, making it suitable for multi-port serial communication systems.