Texas Instruments

Texas Instruments LMC7660IN/NOPB, Charge Pump Inverting, -10 → -1.5 V, 8-Pin, MDIP

Texas Instruments, LM46000PWPT DC-DC Converter 500mA Adjustable, 1 → 28 V, 16-Pin SSOP

Texas Instruments LM2990T-15/NOPB is a fixed -15V negative LDO voltage regulator delivering 1A output current with ±5% accuracy, 0.6V typical dropout voltage, and input range up to 26V in a TO-220 package. From $1.875, in stock worldwide shipping.

Texas Instruments LM2990T-12/NOPB, LDO Voltage Regulator, 1A, -12 V ±5%, -26 → 0.3 Vin, 3-Pin TO-220

Texas Instruments LM139D Quad Comparator, Open Collector O/P, 1.3μs 3 → 28 V 14-Pin SOIC

Use the download button to access the ISO7221MD schematic symbol, PCB footprint, and 3D model.

Texas Instruments DS75176BN/NOPB, Line Transceiver, EIA-422, EIA-485, RS-422, RS-485, 5 V, 8-Pin MDIP

Texas Instruments DRV5033AJQDBZT, Omnipolar Hall Effect Sensor 3-Pin SOT-23, 2.5 → 38 V

DRV5013BCQDBZT is a high-voltage (up to 38V), high-bandwidth (30kHz) Hall effect latch from Texas Instruments with bipolar latched input mode, 24mT hysteresis, and reverse supply protection. From $0.54 in stock, worldwide shipping.

Texas Instruments DAC7551IDRNT, 12 bit Serial DAC, 500ksps, 12-Pin USON

Use the download button to access the DAC5687IPZP schematic symbol, PCB footprint, and 3D model.

Texas Instruments DAC0808LCN/NOPB, 8 bit Parallel DAC, 16-Pin MDIP

Texas Instruments UCC27538DBVT, MOSFET Power Driver, 5A, 10 → 32 V, Non-Inverting, 6-Pin SOT-23

Texas Instruments UCC27533DBVT, MOSFET Power Driver, 5A, 10 → 32 V, 5-Pin SOT-23

Texas Instruments UCC27525D, Dual MOSFET Power Driver 5A, 4.5 → 18 V, Non-Inverting, 8-Pin SOIC

Texas Instruments UC2843N is a current-mode PWM controller IC with 500 kHz switching frequency, 1 A output drive, and 8-28 V input range. Designed for high-performance switch-mode power supplies. From $0.97, in stock with worldwide shipping.

Texas Instruments TPS7A4101DGNT, LDO Voltage Regulator, Adjustable 0.05A, 1.175 → 48 V 2.5%, 8-Pin MSOP

Use the download button to access the CSD18509Q5BT schematic symbol, PCB footprint, and 3D model.

CDCE913PW is a triple-output clock synthesizer IC from Texas Instruments, supporting up to 230 MHz output frequency in a TSSOP-14 package with PLL-based clock generation. From $2.145, in stock with worldwide shipping.

Texas Instruments CD74HCT4051M, Multiplexer/Demultiplexer Single 8:1, 5 V, 16-Pin SOIC

Texas Instruments CD74HC4066M96, Analogue Switch Quad SPST, 3 V, 5 V, 9 V, 14-Pin SOIC

Texas Instruments CD4015BM Dual 4-stage Shift Register, Serial to Parallel, 3 → 18 V, 16-Pin SOIC

Use the download button to access the BQ25071DQCT schematic symbol, PCB footprint, and 3D model.

BQ2004SN is a linear battery charger IC from Texas Instruments, supporting 1-channel NiCd/NiMH fast charge with adjustable voltage input range of 4.5V to 5.5V. Features compact SOIC-16 package. From $2.44, in stock with worldwide shipping.

16-Bit, Pseudo Bipolar, Fully Diff Input, 250kSPS Serial Out, 2.7V to 5.5V Micro Power Sampling ADC

SN75LBC968DL is a 9-channel bus transceiver with active termination, supporting SCSI-2/SCSI-3 interface standards with Schmitt trigger inputs. Features 56-pin SOIC package with 9-bit driver configuration. From $15.23, in stock worldwide shipping.

MSP430G2x52, MSP430G2x12 Mixed Signal Microcontroller

Low Supply Voltage Range: 1.8 V to 3.6 V • Universal Serial Interface (USI) Supporting SPI • Ultra-Low Power Consumption and I2C – Active Mode: 220 µA at 1 MHz, 2.2 V • 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample- – Standby Mode: 0.5 µA and-Hold, and Autoscan (MSP430G2x52 Only) – Off Mode (RAM Retention): 0.1 µA • On-Chip Comparator for Analog • Five Power-Saving Modes • Brownout Detector • Ultra-Fast Wake-Up From Standby Mode in • Serial Onboard Programming,

MSP430G2x55 Mixed Signal Microcontroller

• Low Supply-Voltage Range: 1.8 V to 3.6 V • 16-Bit Timer_A With Two Capture/Compare • Ultralow Power Consumption Registers – Active Mode: 220 µA at 1 MHz, 2.2 V • Brownout Detector – Standby Mode: 0.5 µA • On-Chip Comparator for Analog Signal Compare Function or Slope A/D (See Table 1) – Off Mode (RAM Retention): 0.1 µA • Serial Onboard Programming, • Five Power-Saving Modes No External Programming Voltage Needed, • Ultrafast Wake-Up From Standby Mode in Less Programmable Code Protection by Securit

The LMP91200MT/NOPB is an analog front-end signal conditioner from Texas Instruments, specifically designed for pH and electrochemical sensor interface in a TSSOP-16 package. It operates from up to 6V supply and integrates signal conditioning circuitry for direct interfacing with ion-selective electrodes (ISE). This device is suitable for water quality monitoring, chemical analysis, and industrial sensor systems requiring precision pH measurement.

The SN7474DR is a TTL dual D-type positive edge-triggered flip-flop IC with preset and clear inputs, operating at up to 15 MHz in a 14-pin SOIC package. Each of the two flip-flop elements provides true and complementary outputs with 16 mA sink current capability. Available from stock worldwide at competitive prices.

Use the download button to access the LMR23610ADDAR schematic symbol, PCB footprint, and 3D model.

LM1117IDTX-5.0/NOPB is an 800mA fixed 5V low-dropout linear regulator from Texas Instruments. It features 1.2V typical dropout voltage, built-in current limiting, and thermal shutdown protection. From $0.73, in stock with worldwide shipping.

OPA1632DGNR is a fully differential audio operational amplifier from Texas Instruments, featuring ultra-low distortion (THD+N <0.00008%), 180 MHz gain-bandwidth product, and 45 V/µs slew rate. Ideal for high-fidelity audio ADC drivers and professional audio equipment. From $1.75 in stock with worldwide shipping.

Use the download button to access the OPA1632DR schematic symbol, PCB footprint, and 3D model.

Single 2-Input Positive-NAND Gate

COUNTER/DIVIDER, BINARY; PDIP; BINARY COUNTER/DIVIDER LOGIC; 20V; 500MW; -55

CMOS 12-Stage Ripple-Carry Binary Counter/Divider

Enhanced Product 14-Bit, 8 Msps Adc Single Ch., Diff. Input, Dsp/Up If, Pgmable Gain Amp

Constant-Voltage, Constant-Current Flyback Controller Using Opto-Coupler Feedback

Use the download button to access the UCC28730DR schematic symbol, PCB footprint, and 3D model.

Constant-Voltage, Constant-Current PWM Controller with Primary-Side Regulation

AC/DC Converters Hi Pwr Flyback Cntlr w/ Primary-Side Reg