Texas Instruments

Use the download button to access the TCA9534ADWR schematic symbol, PCB footprint, and 3D model.

3-A High Efficiency Synchronous Step-Down Converter

Use the download button to access the TS5A23167DCUR schematic symbol, PCB footprint, and 3D model.

1% High-Accuracy, 1-A, Low-Dropout Regulator with Reverse Current Protection

High Output Drive, Low Voltage, Single Operational Amplifier

Precision Micropower Shunt Voltage Reference

5-V, 1:1 (SPST), 4-channel general-purpose FET bus switch with st&ard '125-type pinout

Quadruple Differential Line Receivers

The DAC121S101QCMK/NOPB is a 12-bit micro-power rail-to-rail output (RRO) digital-to-analog converter from Texas Instruments with a serial SPI-compatible binary input interface. It supports analog output voltages up to 5.5V with a maximum linearity error of 0.1953% in a compact 6-pin SOT-23 surface-mount package. Available Pb-free with worldwide shipping.

Texas Instruments LM60QIM3/NOPB is an automotive-grade analog output temperature sensor with ±2°C accuracy in a 3-pin SOT-23 package. Draws only 0.11 mA maximum operating current, ideal for low-power vehicle systems.

SIMPLE SWITCHER® 3.5V to 36V, 1A Synchronous Step-Down Voltage Converter

Enhanced Product Quadruple 2-Input Positive-Nand Gate

The AMC7820Y/250 is a 12-bit, 8-channel data acquisition circuit from Texas Instruments with a 3μs conversion time and up to 5V input, packaged in a 48-Pin TQFP. It combines multiple analog input channels with high-speed precision digitization for system monitoring and control. Available in stock worldwide with RoHS-compliant lead-free packaging.

Automotive Catalog Low-Power Single 2-Input Positive-AND Gate

Texas Instruments LP3985ITL-3.3/NOPB is a micropower 150 mA ultra-low-dropout CMOS LDO regulator with a fixed 3.3 V output and only 60 mV typical dropout voltage, operating from a 2.5 V to 6 V input supply. Its low noise output and tiny 5-ball BGA package make it ideal for RF, audio, and precision analog circuits.

36-V, Single-Supply, 10-MHz, Rail-to-Rail Output, Operational Amplifier

12-Bit, 10-MSPS Analog-to-Digital Converter (ADC)

Use the download button to access the SN74LVC1G18DRYR schematic symbol, PCB footprint, and 3D model.

4-Channel ESD Solution for High-Speed Differential Interface

3.6-V, 4-A, 5.3mΩ load switch with quick output discharge

2.0A Unipolar Stepper Motor or 1A Quad Solenoid/Relay Driver with Open-Load Detection (Serial Ctrl)

Single 1.8-V, Micro-power, Rail-to-Rail, Single Supply Amplifier

Automotive 40V, 5A SIMPLE SWITCHER®, 2.2MHz Step-Down Regulator with 40uA IQ

3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver

Quadruple Differential Line Driver

LMP7731MFE/NOPB is an operational amplifier by Texas Instruments. Key specs include Average Bias Current-Max (IIB): 0.075 µA; Bias Current-Max (IIB) @25C: 0.03 µA. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Enhanced Product Triple 3-Input Positive-Nand Gates

Use the download button to access the SN74LVC2G80DCUR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN65LVP20DRFT schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TCA9802DGKR schematic symbol, PCB footprint, and 3D model.

Octal D-Type Transparent Latches with 3-State Outputs and Series Damping Resistors

4-channel, AEC-Q100 qualified, 12-bit Inductance-to-Digital Converter with I2C for Inductive Sensing

Quadruple FET Bus Switch

Octal Buffers and Line Drivers with 3-State Outputs

Dual, 3MHz, Low-Power, Low-Noise, RRI/O, 1.8V CMOS Operational Amplifier

MOSFET 2N-CH 20V 5A 6WSON

2.5 to 38 V Bipolar Output Hall Effect Sensor Family

Automotive capacitor-free 300-mA LDO regulator with foldback current limit for portable devices

Single/Dual/Quad, Low Offset, Low Noise, RRO Operational Amplifiers

2.5-A, 5-A, 35-VMAX VDD FET and IGBT Single Gate Driver

Enhanced Product Memorystick(Tm) Interconnect Extender Chipset

0.345A, 2.7-5.5V Quad (2In/4Out) Hi-Side MOSFET, Fault Report, Act-High Enable

Automotive 4.35V to 16V, 1.5A Li-Ion Charger with Dynamic Power-Path Management

30ppm/°C Drift, 3.9µA, SOT23-3, SC70-3, UQFN-8 Voltage Reference

Use the download button to access the LM3643YFFR schematic symbol, PCB footprint, and 3D model.

Automotive Catalog Quadruple 2-Input Positive-AND Gates

2.7V-to-5.5V 16-Bit 1MSPS Serial ADC With 2-to-1 Multiplexer

Use the download button to access the TPS65632RTER schematic symbol, PCB footprint, and 3D model.

3.3-V ABT Octal Buffers/Drivers With 3-State Outputs

26V, 350kHz Bandwidth, Low- or High-Side Voltage Output Current Sense Amplifier