Texas Instruments

Quadruple 2-Input Positive-NAND Gates

DRV8805DW is a stepper motor controller IC from Texas Instruments with 2.3A max output current in a 20-pin SOP package. Supports unipolar and bipolar motors with built-in protection features. From $2.52, in stock with worldwide shipping.

UCD3020RGZT is a fully programmable digital power controller by Texas Instruments, supporting up to two regulated outputs and six DPWM outputs with current/voltage-mode PWM control and 3.3V supply. From $3.54, in stock worldwide shipping.

UCD3020RGZR is a digital power controller IC from Texas Instruments with current/voltage-mode control and PWM technique, supporting 3–3.6V input in a 48-pin VQFN package. From $2.77, in stock with worldwide shipping.

Use the download button to access the TCA6408AQPWRQ1 schematic symbol, PCB footprint, and 3D model.

MSP432P401RIZXHR is a 32-bit ARM Cortex-M4F mixed-signal microcontroller from Texas Instruments, featuring 48 MHz clock, ADC, DMA, and boundary scan in a compact NFBGA-80 package. From $13.33, in stock with worldwide shipping.

SimpleLink™ ultra-low-power 32-Bit ARM Cortex-M4F MCU With 14-bit ADC, 256KB Flash and 64KB RAM

SimpleLink Ultra-Low-Power 32-Bit ARM Cortex-M4F MCU With Precision ADC, 128KB Flash and 32KB RAM

ARM Microcontrollers - MCU SimpleLink Ultra-Low-Power 32-Bit ARM Cortex-M4F MCU With Precision ADC, 256KB Flash and 64KB RAM 100-LQFP -40 to 85

Use the download button to access the CSD17551Q3A schematic symbol, PCB footprint, and 3D model.

Low Dropout Positive Regulators

LM1086IS-1.8 is a 1.5A low dropout positive voltage regulator with fixed 1.8V output, featuring 1.3V typical dropout voltage and up to 18V input. Ideal for battery-powered systems. From $1.00 in stock, worldwide shipping.

TL082CM is a dual JFET-input wideband operational amplifier from Texas Instruments. Features low bias current (0.0004 µA max), 70 dB CMRR, and internal frequency compensation. Ideal for audio, instrumentation, and signal conditioning. From $0.51 in stock worldwide shipping.

Analog voltage monitor

SCANSTA112SM is a high-performance IEEE 1149.1 JTAG scan bridge multiplexer IC from Texas Instruments, supporting up to 12 TAP ports with flexible chain configuration. Ideal for board-level test, system debug, and multi-device JTAG management. From $11 in stock with worldwide shipping.

SCANSTA111MT is a Texas Instruments IEEE 1149.1 JTAG SCAN bridge IC in a 48-pin TSSOP package, enabling multi-drop JTAG topology with full boundary-scan support. From $7.11, in stock worldwide shipping.

STA Master

Parallel-to-Serial Converter

SCAN12100TYA 100-Pin TQFP

Receiver/Transmitter

LPV7215MF is a nanopower single comparator by Texas Instruments, designed for ultra-low power applications. Key specs: 75nA quiescent current, 1.6V to 5.5V supply voltage, open-drain output. Available in MicroSiP package with worldwide shipping.

LPV531MK is a low-power, low-voltage operational amplifier by Texas Instruments, designed for precision signal conditioning. Key specs: single-supply operation, micropower quiescent current, and rail-to-rail output swing. From $0.65, in stock with worldwide shipping.

LPV511MG is a nanopower rail-to-rail output operational amplifier by Texas Instruments. Key specs: 1.8V to 5.5V supply voltage, 550nA typical quiescent current, 5MHz gain bandwidth product. From $0.73, in stock with worldwide shipping.

Output Operational Amplifiers

Operational Amplifier

LPV321M5 is a single-channel, low-voltage, low-power operational amplifier by Texas Instruments. Key specs: 1.8V to 5.5V supply voltage, 100µA typical supply current, rail-to-rail output swing. From $0.26, in stock with worldwide shipping.

CMOS Dual Operational Amplifier

LPC661IM is a micropower single op-amp by Texas Instruments, designed for low-voltage, low-power applications. Key specs: supply voltage 1.8V–6V, quiescent current 75µA typical, rail-to-rail input/output. From $0.46, in stock with worldwide shipping.

LPC660AIM is a low-power CMOS quad operational amplifier by Texas Instruments, operating from 1.4V to 16V supply with 1.4MHz bandwidth. Key specs: 1.4MHz gain-bandwidth product, 1.4mA supply current, rail-to-rail output swing. From $1.5, in stock with worldwide shipping.

LP8358MF-1.2 is a 1.2V fixed-output low-dropout (LDO) linear voltage regulator by Texas Instruments. Key specs: 1.2V output voltage, low quiescent current, and MF package form factor. From $0.46, in stock with worldwide shipping.

Dual Linear Regulator

Dual Rail Linear Regulator

LP5952TL-1.6 is a dual rail fixed linear regulator from Texas Instruments with 1.6V output, 300mA capability, 88mV dropout voltage, and 6V max input. Ideal for portable and low-power applications.

The LP5952TL-1.5 is a fixed-output 1.5V single-rail low-dropout linear regulator in a tiny 5-ball DSBGA package. Features an ultra-low 88mV dropout voltage, 0.7V to 4.5V input range, and stable output for noise-sensitive analog and RF circuits. Available from stock with worldwide shipping.

LP5952TL-1.4 is a 150mA ultra-low-dropout LDO linear voltage regulator with 1.4V fixed output by Texas Instruments. Key specs: 150mA output current, 1.4V fixed output voltage, low 330mV dropout, SOT-23 package. From $0.25, in stock with worldwide shipping.

LP5952TL-1.3 is a fixed-output dual rail linear regulator from Texas Instruments, delivering 1.3V with 88mV typical dropout voltage and up to 4.5V input. Designed for noise-sensitive applications in compact 5-ball BGA packages with worldwide stock and fast shipping.

Dual Rail Linear Regulator

CMOS Voltage Regulator

CMOS Voltage Regulator

CMOS Voltage Regulator