Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
41,509
Total Products
126
Categories
All Texas Instruments Components
Showing 21,251–21,300 of 41,509
Automotive Catalog Quad Differential Comparator, Enhanced Voltage
The SN74CBT16292DGGR is a 12-bit 1-of-2 FET multiplexer/demultiplexer with internal pulldown resistors, packaged in a 56-pin TSSOP and rated for 200MHz bandwidth. With 20-ohm on-state resistance and SPDT FET switch topology, it enables high-speed signal routing for display interfaces, memory address multiplexing, and high-bandwidth bus switching in computing and telecommunications applications.
Cap-Free, NMOS, 250mA Low Dropout Regulator with Reverse Current Protection
Automotive Catalog Hex Inverters
Use the download button to access the DAC2932PFBT schematic symbol, PCB footprint, and 3D model.
3.3 V Full-Duplex RS-485, with IEC ESD, 50 Mbps, w/ Enables
Low-Noise, Low-Distortion, G=2000 Instrumentation Amplifier
16 MHz Ultra-Low-Power MCU With 256 KB FRAM, 8 KB SRAM, Low-Energy Vector Math Accelerator
Piccolo™ 32-bit MCU with 60 MHz, 128 KB Flash, CLA, PGAs
Adjustable, 600-mA, 95% Efficient Step-Down Converter, 18uA, MSOP-10
The LM22676QTJE-5.0/NOPB is a high-efficiency synchronous step-down DC-DC switching regulator with a fixed 5 V output. It accepts an input voltage from 4.5 V to 42 V, provides up to 1 A continuous output current, and uses pulse-width modulation with voltage-mode control in a compact 7-pin SOT-223 package.
3-4S Low Power Protector
TPS54560BQDDARQ1 is an automotive-grade, 4.5 V to 60 V input, 5 A step-down DC-DC converter with Eco-mode by Texas Instruments. Key specs: current-mode PWM control, 60 V maximum input, 5 A output, AEC-Q100 qualified. From $2.80, in stock with worldwide shipping.
The TPS63050YFFR is a single-inductor buck-boost converter from Texas Instruments with 1A switches, adjustable output from 2.5V to 5.5V, and current-mode PWM plus PFM control in a 12-ball BGA package. It supports adjustable soft-start for inrush control and maintains high efficiency across a wide input voltage range. Available from stock worldwide with competitive pricing.
Use the download button to access the CD4020BNSR schematic symbol, PCB footprint, and 3D model.
Automotive 2.3V to 5.5V Input Range, 3.5 MHz Fixed Frequency 450mA Boost Converter
30V, N ch NexFET MOSFET™, single LGA 0.8x1.5, 33mOhm
Low-Power RS-485 Full-Duplex Drivers/Receivers
Dual-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation Aan 3-State Outputs
Octal D-Type Registers with 3-State Outputs and Series Damping Resistors
103dB SNR Stereo ADC With Single-Ended Inputs
NFBGA-324
3.2-W/Ch Stereo SmartGainTM Class-D Audio Amplifier with Dynamic Range
Conv DC-DC 2.5V to 6V Non-Inv/Inv/Step Up/Step Down Single-Out 3V to 18.5V 3.2A 10-Pin WSON EP T/R
2-Channel System-Level ESD Protection Device for USB Interfaces
26V, 350kHz Bandwidth, Low- or High-Side Voltage Output Current Sense Amplifier
2.7V-to-5.5V, 16-Bit, 500kSPS Low-Power Serial ADC With 8-Ch Multiplexer and Breakout
Enhanced Product Processor Supervisory Circuits With Window-Watchdog
5.5V, 6A, 14mΩ, Dual Load Switch with Adj. Rise Time & Optional QOD for Cost-Conscious Applications
High voltage (up to 38V), linear hall effect sensor
0.7-Ohm Dual SPDT Analog Switch With Negative Rail Capability
Use the download button to access the SN74LVC257ARGYR schematic symbol, PCB footprint, and 3D model.
Automotive 1.6A Bipolar Stepper Motor Driver with On-Chip 1/32 Microstepping Indexer (Step/Dir Ctrl)
The LP5907MFX-3.1/NOPB is a 250 mA ultra-low-noise low-IQ LDO linear regulator from Texas Instruments with a fixed 3.1 V output, 2.2 V to 5.5 V input range, and 0.12 V typical dropout voltage in a 5-pin SOT-23 package. It delivers a 15-year estimated product lifetime with RoHS-compliant lead-free construction.
1-Of-8 FET Multiplexer/Demultiplexer
Use the download button to access the TPS53355DQPR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TL750L10CLPR schematic symbol, PCB footprint, and 3D model.
Audio Transmitters, Receivers, Transceivers Dig Audio Interface Trans
3.3V, Full-Duplex RS-485, 12kV IEC ESD, 50Mbps data rate, No Enables
8 Bit, 1 MSPS, 12 Ch, Single Ended, Micro Power, sr i/f, SAR ADC
Low-Noise Fast-Transient-Response 1.5-A Low-Dropout Voltage Regulator
30V, N ch NexFET MOSFET, single SON5x6, 2.3mOhm
Dual, High-Voltage, High Slew-Rate Current Feedback Amplifier
Digital temperature sensor from Texas Instruments with I2C/SMBus interface and drop-in LM75 form factor, offering ±1°C maximum accuracy. Features programmable hysteresis of 500 mV and a 4.9 × 3.9 mm plastic SOIC-8 package. RoHS-compliant with global stock and worldwide shipping.
DS110DF111 Low Power Multi-Rate Two-Channel Retimer
36V, Bi-Directional, Low-/High-Side, Voltage Output CSA with Window Comparator
Enhanced Product Quadruple 2-Input Positive-And Gates
3- to 5-Series Li-Ion and Li-Phosphate Ultra-Low-Power Stackable Battery Protector
Use the download button to access the ISOW7841DWER schematic symbol, PCB footprint, and 3D model.
60V Three-Phase Smart Gate Driver With Buck Regulator
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote